{"title":"Fourtry — Mower Blades","description":"\u003cp\u003e\u003cstrong\u003eFourtry\u003c\/strong\u003e accounts for 22 listings in the PatioZora catalog, concentrated in blades (14 products) and pulleys (3). Replacement mower blades listed by deck width and OEM part number, in high-lift, mulching and 2-in-1 patterns. Order on the number stamped on the old blade or the deck decal, and replace blades in matched sets so the deck stays balanced.\u003c\/p\u003e\u003cp\u003ePrices across this range run from about $22.17 to $61.89, with the middle of the range near $39.98. Free US shipping on every order.\u003c\/p\u003e","products":[{"product_id":"fourtry-replacement-173920-high-lift-mower-blades-48-inch-deck-3-pack","title":"Fourtry Replacement 173920 High Lift Mower Blades - 48-inch Deck - 3 Pack","description":"\u003cp\u003eMeet the Fourtry Replacement 173920 High Lift Mower Blades designed for 48-inch cutting decks. This 3-pack gives you ready-to-use blades for quick swaps, helping you maintain a clean lawn with fewer interruptions in your mowing routine.\u003c\/p\u003e\u003cp\u003eDesigned for broad compatibility, these blades support many popular models across brands, including Ariens, AYP, Craftsman, Poulan, and Husqvarna. The listing covers typical part numbers like 173920, 180054, and several variations, so you can compare your spindle pattern before purchase. If you’re tending a 48-inch deck, these blades are sized to fit standard configurations and help you achieve consistent cutting results.\u003c\/p\u003e\u003ch3\u003eHigh lift for better airflow and bagging\u003c\/h3\u003e\u003cp\u003eThe high-lift geometry creates stronger airflow through the blade, which can improve clippings collection and help maintain an even cut, especially when grass is tall or dense. The blades are built from sturdy metal and finished with a powder-coated coating that adds durability and a safer edge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePredicted performance: improved bagging and less buildup at the discharge chute\u003c\/li\u003e\n\u003cli\u003eCutting consistency: helps you achieve an even surface across the width of a 48-inch deck\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRugged construction and practical use\u003c\/h3\u003e\u003cp\u003eThese blades are designed to stand up to challenging mowing conditions, including wet grass, mud, and minor obstacles like rocks or small stumps. Note that they’re not designed for sandy or loose soil, where blade wear and performance can differ.\u003c\/p\u003e\u003cp\u003eIn real-world use, you might notice the coating gradually wears to reveal the sharp edge, which some users interpret as an indicator of readiness to cut. This is a natural part of the finish on powder-coated blades.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSwapping in takes minutes with a suitable torque wrench and the correct bolt. Ensure the two blades mount with the cutting edge facing the same direction for balanced performance. The standard blade dimensions help you verify compatibility before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlade length: 16-3\/4 inches\u003c\/li\u003e\n\u003cli\u003eWidth: 2-1\/2 inches; Thickness: 0.2020 inches\u003c\/li\u003e\n\u003cli\u003eCenter hole: 5-point star; Deck size: 48 inches; Lift: High Lift\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe 3-pack offers convenience and value for routine maintenance, giving you ready replacements as wear marks appear. Always check your blade part number and spindle pattern before ordering to ensure a precise fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models are compatible with Fourtry 173920 High Lift Mower Blades\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Widely compatible with 48-inch decks across Ariens, AYP, Craftsman, Poulan, and Husqvarna; verify spindle pattern before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to sharpen the blades after installation\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The coating wears to reveal a sharp edge over time; many users find no additional sharpening is needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43979988205702,"sku":"B0CR3PJLSN","price":36.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-173920-high-lift-blade-assembly.jpg?v=1778680721"},{"product_id":"fourtry-mulching-blade-kit-72531-vk6-010-72511-vk6-000-for-honda-hrc216k2-k3-2-blades","title":"Fourtry Mulching Blade Kit 72531-VK6-010 \u0026 72511-VK6-000 for Honda HRC216K2\/K3 (2 Blades)","description":"\u003ch2\u003eFourtry Replacement Mulching Blade Kit for Honda HRC216K2\/K3\u003c\/h2\u003e\n\u003cp\u003eRefresh your mower with a purpose-built blade pair designed to replace the original upper and lower mulching blades. The kit includes upper blade 72531-VK6-010 and lower blade 72511-VK6-000, ensuring a precise swap and renewed mowing performance. Verifying your old blade part numbers before purchase helps confirm the right fit for your Honda model.\u003c\/p\u003e\n\u003cp\u003eDesigned with compatibility in mind, this blade kit is meant for Honda HRC216K2 and HRC216K3 series, including related PDA, HXA, and HDAH variants. If your mower uses the same blade geometry, you’ll likely experience a straightforward installation without the need for extra adapters.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExact replacement parts: upper blade 72531-VK6-010 and lower blade 72511-VK6-000.\u003c\/li\u003e\n  \u003cli\u003eSupports mulching, bagging, and side-discharge functions for flexible mowing approaches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWhat you can expect in use\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCleaner cuts with a balanced edge designed for consistent performance across mowing sessions.\u003c\/li\u003e\n  \u003cli\u003eReturn of light clippings to the lawn during mulching, helping to reduce waste and maintain a neat appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEasy installation and safety considerations\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo screws are typically all you need to replace both blades when you have a torque wrench handy.\u003c\/li\u003e\n  \u003cli\u003eBlades ship with a painted edge for safety; the paint wears away with use, revealing a sharp edge for effective cutting.\u003c\/li\u003e\n  \u003cli\u003eBefore ordering, confirm mounting center hole and blade size to ensure a precise fit with your unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eTips for a successful swap\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlign the cutting edges in the same direction toward the ground during installation.\u003c\/li\u003e\n  \u003cli\u003eUse a properly calibrated torque wrench to secure the blades at the recommended torque.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWith the Fourtry kit, you gain a dedicated, OEM-mimicking option that can help restore mowing performance without guesswork on compatibility. See how these blades perform in your yard across seasons and conditions, keeping maintenance simple and predictable.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit compatible with my Honda mower models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It replaces upper 72531-VK6-010 and lower 72511-VK6-000 blades on Honda HRC216K2 and HRC216K3 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included and how easy is installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes two blades; install with two screws using a torque wrench for a secure, quick swap.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43979991679110,"sku":"B0CR36F9ZH","price":42.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-upper-blade-72531-vk6-010.jpg?v=1778680765"},{"product_id":"fourtry-gx22151-mower-blades-for-john-deere-42-inch-deck-mulching-2-pack","title":"Fourtry GX22151 Mower Blades for John Deere 42-Inch Deck – Mulching 2-Pack","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eFourtry GX22151 mower blades are designed to replace OEM parts for John Deere 42-inch deck riding mowers. They cover a broad range of fitment including several JD models, and are built to deliver consistent performance across mowing tasks. This 2-pack gives you a ready-to-install option for paired replacement, helping you keep a tidy lawn with dependable blades.\u003c\/p\u003e\n\u003ch3\u003eQuality and Construction\u003c\/h3\u003e\n\u003cp\u003eCrafted from heavy-duty steel, these blades feature sharp gear edges and a twisted backside for balanced cutting. A black coating helps hinder rust and corrosion, supporting long-term outdoor use without compromising performance.\u003c\/p\u003e\n\u003ch3\u003eMulching Action and Lawn Care\u003c\/h3\u003e\n\u003cp\u003eIn mulching mode, the blades slice grass clippings into tiny particles, which can help some nutrients return to the lawn and promote even coverage. The curved blade form promotes airflow across the cutting deck, aiding clipping circulation and reducing clumping. A longer, sharper edge supports repeated passes for a clean finish.\u003c\/p\u003e\n\u003ch3\u003eFitment, Size, and Specs\u003c\/h3\u003e\n\u003cp\u003eSize details: blade length is 21 3\/8 inches, width 2 11\/16 inches, and thickness 0.286 inches. The center holes use a 7-point star pattern to align with compatible spindles. Please verify the exact fitment against your mower model to ensure proper mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement part numbers covered include GY20850, AM141033, AM137327, AM137328, AM137333, AM141032, AM141034, M154061, M154060, M149422.\u003c\/li\u003e\n  \u003cli\u003eCompatibility focuses on 42-inch deck John Deere ride-ons, including JD 102, 115, 125, 135, as well as D100, D110, D125, D120D, D130, LA100, LA110, LA120 and related models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed for durability with rust-preventive coating and a robust cutting edge.\u003c\/li\u003e\n  \u003cli\u003eMulching design features curved airflow to support clipping circulation and a consistent mowing experience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUsage Tips\u003c\/h3\u003e\n\u003cp\u003eFor best results, inspect blades for balance and replace them in pairs to maintain even mowing. Always verify fitment against your deck and follow proper mounting procedures when installing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models are compatible with Fourtry GX22151 blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The GX22151 blades fit many 42-inch John Deere mower decks, including JD 102, 115, 125, 135, D100, D110, D125, D120D, D130, LA100, LA110, and LA120; please confirm compatibility with your model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the mulching benefit of these blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: These blades mulch grass clippings into fine particles, helping distribute micro-nutrients across the lawn while maintaining an even cut.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43980018778246,"sku":"B0CQRB9RMH","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-gx22151-blades-set.jpg?v=1778680986"},{"product_id":"fourtry-gy20852-mower-blades-3-pack-for-john-deere-48-inch-deck-high-lift-gx21784-am141035-compatibility","title":"Fourtry GY20852 Mower Blades 3-Pack for John Deere 48-Inch Deck | High Lift, GX21784\/AM141035 Compatibility","description":"\u003ch2\u003eUpgrade your mower with Fourtry GY20852 blades\u003c\/h2\u003e\u003cp\u003eDiscover a 3-pack of high lift mower blades designed to fit John Deere 48-inch decks and a wide range of compatible models. These blades are built for durability and versatility, aiming to deliver a cleaner, more even cut across your lawn. Rather than a one-size-fits-all approach, this set is crafted to align with common JD configurations, helping you maintain a neat, consistent look with every pass.\u003c\/p\u003e\u003cp\u003eBefore you buy, verify that the replacement part number matches your original equipment. Each kit includes three blades that share the same profile and mounting interface, so you can swap in seconds when you notice wear or after seasonal maintenance.\u003c\/p\u003e\u003ch3\u003eKey compatibility highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits John Deere 48-inch decks and select models across JD lines, including LA130, LA140, LA145, LA155, LA165, 145, 155C, D140, D150, D155, D160, X140, X165, Z245, Z255, Z355E, Z355, S140, S160, S170, E140, E150, E160, E170.\u003c\/li\u003e\n\u003cli\u003eFeatures a 7-point star mounting hole for secure, precise alignment.\u003c\/li\u003e\n\u003cli\u003eThree blades in one package provide ready replacement for regular maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHigh lift design for airflow and clipping management\u003c\/h3\u003e\u003cp\u003eThe blades are designed with a vertical angle to maximize airflow, supporting efficient bagging and clipping release while maintaining a level, even cut, especially in taller grass. The sturdy metal construction stands up to wet mud, rocks, and tree stumps, though performance may vary in sandy or loose soil.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved airflow can help with bagging and clipping containment.\u003c\/li\u003e\n\u003cli\u003eRugged construction supports tough conditions without frequent replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBlade specs and finish\u003c\/h3\u003e\u003cp\u003eEach blade measures 17 1\/8 inches in length, 2 3\/4 inches in width, and 0.1565 inches thick, with a 7-point star center hole. A powder-coated finish provides safety; over time, the coating will wear to reveal the blade’s natural sharp edge, potentially reducing the need for routine sharpening.\u003c\/p\u003e\u003ch3\u003eInstallation and care tips\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstall in minutes using a torque wrench and the appropriate bolts.\u003c\/li\u003e\n\u003cli\u003eEnsure both blades have the cutting edge facing the same direction on both sides.\u003c\/li\u003e\n\u003cli\u003eCheck alignment periodically to maintain consistent mowing results.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhat’s included: a 3-pack of Fourtry GY20852 mower blades designed for broad compatibility with John Deere and related models. This option offers a practical upgrade for users seeking robust, ready-to-install replacement blades without the need for frequent sharpening.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which mower models and part numbers are compatible?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The blades fit John Deere 48-inch decks and listed part numbers such as GY20852 and AM141035; verify compatibility before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation straightforward?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Install in minutes with a torque wrench; ensure blades face the same direction and use the 7-point star mounting hole.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43980019335302,"sku":"B0CQRBX47T","price":39.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-gy20852-three-blade-pack.jpg?v=1778680994"},{"product_id":"fourtry-gx22151-gy20850-mulching-mower-blades-for-42-john-deere-ride-on-2-pack","title":"Fourtry GX22151 \u0026 GY20850 Mulching Mower Blades for 42\" John Deere Ride-On — 2 Pack","description":"\u003ch2\u003eSmart, durable mulching blades designed for 42\" decks\u003c\/h2\u003e\n\u003cp\u003eMeet the Fourtry GX22151 and GY20850 mulching mower blades, crafted to handle a variety of John Deere riding mowers with a 42\" deck. These blades are designed to finely mulch clippings, helping your lawn look tidy as you move through the season. The blades combine a robust edge with precise balance, delivering a steady, confident cut that feels reliable in daily yard work.\u003c\/p\u003e\n\u003cp\u003eDesigned to replace a broad set of part numbers, this pair covers GX22151, GY20850, AM137328, AM137333, AM141033, UC21583, GX21694, M149422 and more. In addition, compatibility references Windsor 50-3231 and other JD model designations such as 11593, 11594, 212-0456, and 302-456 appear in the specification list. Always double-check your mower’s original part number to confirm a proper fit before purchasing.\u003c\/p\u003e\n\n\u003ch3\u003eKey fit, features, and performance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision sizing:\u003c\/strong\u003e 21-1\/2\" length, 2-3\/4\" width, and 0.2020\" thickness give a strong, balanced mowing edge for consistent cuts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDeck compatibility:\u003c\/strong\u003e Built for a 42\" deck with mulching action to help manage clippings and promote a tidy lawn finish.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecure mounting:\u003c\/strong\u003e 7-point star center holes pair with the blade’s curved side toward the deck to improve flow and stability during mowing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eReal-life use cases and benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for tall grasses and denser vegetation, offering steady, uniform cutting across varied yard conditions.\u003c\/li\u003e\n  \u003cli\u003eDurable construction is designed to resist wear when minor debris like sand or stones is encountered, helping maintain cutting quality over multiple sessions.\u003c\/li\u003e\n  \u003cli\u003eThe mulching design helps return finely processed clippings to the soil, potentially reducing the need for frequent cleanup after mowing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation tips and care guidance\u003c\/h3\u003e\n\u003cp\u003eInstalling the blades is straightforward: wear gloves, use a wrench, and mount with the curved side facing the deck to optimize cut flow. After installation, inspect for straightness and balance to ensure smooth operation throughout use. Regularly check mounting hardware for tightness, and replace the blades if you notice nicks, warping, or excessive vibration.\u003c\/p\u003e\n\n\u003cp\u003eNote: This product description highlights features and plausible benefits drawn from the listed specifications. Actual results may vary based on mower model, mowing conditions, and maintenance routines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What John Deere models does this blade fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits a wide range of 42\" deck mowers; please verify your original part number before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How should I install the blade?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Wear gloves, use a wrench, mount with the curved side toward the deck and align the 7-point star holes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43980019368070,"sku":"B0CQRBYXLK","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-gx22151-mower-blade-42-deck.jpg?v=1778680996"},{"product_id":"fourtry-107-3709-rear-wheel-gear-assembly-8x2-in-2-pack-toro-super-recycler-compatible","title":"Fourtry 107-3709 Rear Wheel Gear Assembly – 8x2 in, 2 Pack, Toro Super Recycler Compatible","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Fourtry 107-3709 rear wheel gear assembly is designed as a direct replacement for Toro Super Recycler mowers. This two-pack helps you swap worn components quickly and keeps your mower's rear wheels aligned with OEM specs, matching the 107-3709 design. The 8x2 inch wheel footprint is a common size for many self-propelled mowers, and the 1\/2 inch bore matches standard mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eKey advantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExact OEM match and direct replacement for 107-3709 compatibility, reducing guesswork during service.\u003c\/li\u003e\n\u003cli\u003eA total of 42 metal teeth engage the drive gears, supporting solid drive engagement on varied surfaces.\u003c\/li\u003e\n\u003cli\u003eRugged rubber tire paired with a sturdy plastic hub provides durable, stable operation outdoors.\u003c\/li\u003e\n\u003cli\u003eInstallation is straightforward with a standard wrench, enabling a quick swap without specialized tools.\u003c\/li\u003e\n\u003cli\u003eTwo-pack kit keeps you stocked with spare components for future maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat you get and fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo rear wheel gear assemblies in a single package\u003c\/li\u003e\n\u003cli\u003eWheel diameter 8 inches and width 2 inches\u003c\/li\u003e\n\u003cli\u003e1\/2 inch bore size for common mounting shafts\u003c\/li\u003e\n\u003cli\u003eDesigned for Toro Super Recycler models and other compatible units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReality in use can vary with mowing conditions. The design emphasizes a direct fit and durability, offering a potential improvement in traction and propulsion when the original wheel gear shows wear. The rugged build and simple service steps aim to make routine maintenance less disruptive, so you can keep your yard work moving forward without pressure or guarantees.\u003c\/p\u003e\n\u003ch3\u003eReal-world scenarios\u003c\/h3\u003e\n\u003cp\u003eSprinkling a few clippings and damp grass is common in many yards. With a replacement wheel gear like this, you may notice steadier control and more predictable propelling response on uneven turf, even when the mower encounters small inclines or soft soil. The kit’s two-pack arrangement supports proactive maintenance by letting you replace both rear wheels at once, reducing downtime and guesswork.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the Fourtry 107-3709 rear wheel gear assembly 2-pack?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Two rear wheel gear assemblies, ready to install on Toro Super Recycler mowers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this wheel compatible with my Toro Super Recycler mower model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is designed for Toro Super Recycler models with OEM 107-3709 specs and a 1\/2 inch bore.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43980081234054,"sku":"B0D3QGDQ75","price":39.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-107-3709-rear-wheel-gear-assembly.jpg?v=1778682940"},{"product_id":"fourtry-replacement-942-04417-high-lift-mower-blades-3-pack-for-48-cub-cadet-enforcer-recon-z-force-pro","title":"Fourtry Replacement 942-04417 High Lift Mower Blades – 3 Pack for 48\" Cub Cadet Enforcer Recon Z-Force Pro","description":"\u003cdiv\u003e\n  \u003ch2\u003eOverview\u003c\/h2\u003e\n  \u003cp\u003eEnhance mowing performance with the Fourtry replacement blades designed for 48\" decks. This 3‑pack updates your mower’s cutting geometry to improve air flow, bagging, and overall clipping management. Built from durable metal with a protective finish, these blades are engineered to hold up under demanding yard conditions while delivering a balanced, even cut.\u003c\/p\u003e\n  \u003cp\u003eCrafted for real‑world use, these blades pair practical design with a reliable build. The result is a mowing experience that can feel smoother and more controlled as you move across damp mornings, tall grass, or light debris—without promising guaranteed outcomes. The high lift profile helps lift and release clippings for cleaner bagging and steadier discharge.\u003c\/p\u003e\n  \u003ch3\u003eKey Benefits at a Glance\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eImproved airflow and clippings management for bagging and cut consistency.\u003c\/li\u003e\n    \u003cli\u003eRugged construction with a powder‑coated finish for durability in wet or stubborn terrain.\u003c\/li\u003e\n    \u003cli\u003eDesigned to align with 48\" Cub Cadet and Z‑Force Pro decks, broad compatibility across many models.\u003c\/li\u003e\n    \u003cli\u003eEasy installation with a clear orientation and standard torque approach; replaces multiple part numbers.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eCompatibility \u0026amp; Specs\u003c\/h3\u003e\n  \u003cp\u003eThe 942‑04417 blades are a high lift blade option that replaces several part numbers and fits a range of 48\" decks. Common fits include Cub Cadet Enforcer 48, Recon 48, and Z‑Force Pro 48 series, among others. Before ordering, verify your spindle pattern and center hole configuration.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eBlade length: 16 15\/16\"\u003c\/li\u003e\n    \u003cli\u003eBlade width: 3\"\u003c\/li\u003e\n    \u003cli\u003eThickness: 0.2055\"\u003c\/li\u003e\n    \u003cli\u003eCenter hole diameter: 3\/4\" (round center holes)\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eInstallation \u0026amp; Care\u003c\/h3\u003e\n  \u003cp\u003eInstallation is quick and straightforward. Gather a torque wrench and the appropriate bolts, ensure the cutting edge faces the same direction on both blades, and tighten to the recommended spec. The blades are powder coated for safety and wear, with the edge becoming fully visible as the coating wears—potentially reducing sharpening needs over time.\u003c\/p\u003e\n  \u003cp\u003eTip: Always double‑check spindle compatibility and the correct blade orientation for a balanced cut. For best results, rotate or replace blades in pairs to maintain even mowing performance.\u003c\/p\u003e\n  \u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n  \u003cp\u003eThree high lift mower blades designed for 48\" decks, packaged as a convenient 3‑pack to cover multiple mowing sessions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What decks and models are compatible with these blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with many 48\" Cub Cadet and Z‑Force Pro decks; see the listing for the full fitment list.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to sharpen these blades often?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The blades ship with an edge; the coating wears to reveal the edge, which may reduce sharpening frequency.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43982374731910,"sku":"B0CR3PN4QM","price":56.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-942-04417-high-lift-blade-pack.jpg?v=1778755164"},{"product_id":"fourtry-539113312-hi-lift-mower-blade-3-pack-for-61-decks-husqvarna-ez5224-ez6124-compatible","title":"Fourtry 539113312 Hi Lift Mower Blade — 3-Pack for 61\" Decks, Husqvarna EZ5224\/EZ6124 Compatible","description":"\u003ch2\u003eElevate your mowing experience with Fourtry Hi Lift Blades\u003c\/h2\u003e\n\u003cp\u003eThe Fourtry 539113312 Hi Lift Blade is a robust 21-inch cutting tool designed for 61-inch decks. This three-pack delivers a reliable replacement option for regular maintenance, offering enhanced suction and efficient clipping management. While real results can vary with mowing conditions, the design is aimed at helping you achieve consistent, well-presented lawns with less effort per pass.\u003c\/p\u003e\n\u003cp\u003eCrafted for compatibility across a broad range of equipment, this blade crosses multiple part numbers and models. Always compare the listed references to your mower’s manual to confirm a proper fit. The goal is a smooth integration that supports your routine without complex adjustments.\u003c\/p\u003e\n\n\u003ch3\u003eKey benefits at a glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCross-reference readiness: matches numerous Husqvarna and related models, making it easier to find a fit.\u003c\/li\u003e\n  \u003cli\u003eDurable construction: pre-treated with a corrosion-resistant coating to withstand regular outdoor use.\u003c\/li\u003e\n  \u003cli\u003eTool-less installation: pre-installed mounting features and included instructions simplify the swap.\u003c\/li\u003e\n  \u003cli\u003eBundle convenience: three blades in one pack provide ready replacements for frequent mowing seasons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eReal-world use and specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBlade length: 21 inches (53.3 cm) with a 2.5-inch (6.35 cm) width for balanced performance.\u003c\/li\u003e\n  \u003cli\u003eCenter bore: 5\/8 inch (15.88 mm); blade thickness: 0.2 inches, designed for stable mounting.\u003c\/li\u003e\n  \u003cli\u003eDeck compatibility: designed for 61-inch mowing decks, with cross-reference guidance to support model matching.\u003c\/li\u003e\n  \u003cli\u003eClippings management: the hi-lift geometry aims to lift and discharge with a cleaner cut appearance and easier bagging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat you receive and how to use it\u003c\/h3\u003e\n\u003cp\u003eIncluded in the 3-pack are three 21-inch blades with corrosion-resistant coating and installation instructions. Before purchasing, verify dimensions against your current blades and consult your mower’s manual for proper fitment. This bundle is intended to provide reliable replacements that fit compatible 61\" decks, enabling straightforward maintenance and continued lawn care performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this blade compatible with Husqvarna EZ5224 and EZ6124?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; it cross-references Husqvarna EZ5224 and EZ6124 models. Please confirm your deck size and center bore before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the package and how do I install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Three 21-inch blades with pre-installed hardware and instructions; designed for straightforward, tool-free setup on compatible decks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43982376730758,"sku":"B0D3G7CT3L","price":58.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-539113312-hi-lift-blade-21in.jpg?v=1778755349"},{"product_id":"fourtry-replacement-482878-high-lift-blades-for-36in-52in-decks-scag-tiger-cub-turf-tiger-wildcat-3-pack","title":"Fourtry Replacement 482878 High Lift Blades for 36in \u0026 52in Decks — Scag Tiger Cub, Turf Tiger, Wildcat (3 Pack)","description":"\u003ch2\u003eUpgrade your mowing performance with Fourtry Replacement 482878 High Lift Blades\u003c\/h2\u003e\n\u003cp\u003eThe Fourtry 482878 high lift blades are designed to fit a broad range of popular mower configurations, offering a balance of strength and precision. The high lift geometry is crafted to promote airflow and lift, supporting efficient bagging and helping you achieve an even, level cut in varied grass conditions. Made from premium metal and finished with a protective powder coating, these blades are built to stand up to the rigors of regular mowing, including damp grass, light debris, and occasional obstacles like small rocks or tree stumps. It’s a practical upgrade for yard work that combines reliability with straightforward, no-fuss maintenance.\u003c\/p\u003e\n\u003cp\u003eCompatibility is a central feature. These blades are listed to work with several Ferris, Scag, Husqvarna, Toro, Encore, and related walk-behind and zero-turn models. Before purchasing, please confirm the exact deck size (36in or 52in) and the corresponding part numbers to ensure a proper match. For a typical setup, expect two blades for a 36in deck or three blades for a 52in deck, depending on your mower model. This listing is for a 3-pack, so you can keep spares on hand or cover multiple positions on the same deck.\u003c\/p\u003e\n\u003ch3\u003eWhy the high lift design matters\u003c\/h3\u003e\n\u003cp\u003eThe blade’s vertical angle enhances airflow through the cutting zone, which can aid in lifting and dispersing clippings. This design can support more effective bagging and help maintain a consistent surface across tall patches and damp turf. While it won’t transform all conditions, the geometry is commonly associated with smoother clipping flow and reduced chute clogs in challenging grass.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReliable, coated blades that arrive ready to install without sharpening.\u003c\/li\u003e\n  \u003cli\u003ePowder coating adds a protective layer for longer life and safer handling.\u003c\/li\u003e\n  \u003cli\u003eDurable construction that withstands wet grass and light debris without compromising cutting integrity.\u003c\/li\u003e\n  \u003cli\u003eDesigned for 36in and 52in decks; verify your deck size and part numbers before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEasy installation and care\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and can be completed in minutes with a torque wrench. Ensure the blades share the same cutting-edge orientation and tighten to your mower’s specified torque. The coating will gradually wear away to reveal the true sharpness, so you may not need to perform extra sharpening after installation.\u003c\/p\u003e\n\u003cp\u003eKey size and fit details help you verify compatibility: blade length 18 inches, width 2 3\/8 inches, thickness 0.1535 inches, center hole 5\/8 inch, air lift 1 inch, with a round hole pattern. These specifications assist you in comparing your current blades to avoid mismatches before ordering.\u003c\/p\u003e\n\u003cp\u003eWith a 3-pack included, Fourtry provides a practical solution for replacing multiple blades on compatible decks, helping you maintain mowing readiness across seasons. This product set is designed to offer dependable performance while staying aligned with standard mower configurations, without implying guaranteed outcomes in every yard condition.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these blades compatible with 36in and 52in deck mowers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these blades fit many 36in and 52in deck models across Scag, Ferris, Husqvarna, Toro, and Snapper; verify deck size and part numbers before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Should I sharpen the blades after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No sharpening required; blades arrive pre-sharpened and coated for safety, with the coating wearing away to reveal the blade’s edge.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43982840561798,"sku":"B0CQRF6Q1H","price":48.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-482878-high-lift-blades-packaging.jpg?v=1778769720"},{"product_id":"fourtry-mulching-blades-for-toro-42-inch-deck-2-pack-106-2247-03-106-8744-03","title":"Fourtry Mulching Blades for Toro 42-Inch Deck – 2 Pack (106-2247-03, 106-8744-03)","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eRefresh the mowing experience with Fourtry two-pack mulching blades designed to fit Toro 42-inch decks and a range of Time Cutter models. This pair replaces several Toro and Time Cutter part numbers, offering a ready-to-install solution when blades become dull or worn. The goal is a cleaner cut and well-mulched clippings that return to the lawn with fewer interruptions during routine maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Fit\u003c\/h3\u003e\n\u003cp\u003ePackaged with compatibility in mind, these blades are listed for Toro 42-inch decks and various Time Cutter configurations. Before purchasing, compare your spindle hub pattern and the blade measurements to ensure a proper fit. The product notes emphasize verifying fit against the listed part numbers (106-2247-03, 106-8744-03, and related references) to avoid mismatches.\u003c\/p\u003e\n\n\u003ch3\u003eDurability and Cutting Performance\u003c\/h3\u003e\n\u003cp\u003eConstructed from premium steel and engineered for reliable grass processing, the blades are designed to maintain sharpness over time and provide stable operation under typical mowing conditions. Balanced weight distribution supports steady cutting performance, even when traversing uneven patches or navigating around landscaping features. The blades arrive pre-sharpened and coated with a protective layer that wears away during the initial use, revealing the edge for ongoing maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and Maintenance\u003c\/h3\u003e\n\u003cp\u003eInstallation is described as tool-free, with blades that install securely when following the equipment manufacturer guidelines. The protective coating is intended to wear off during the break-in period, after which you can expect the blade edge to be ready for continued use. Regular inspection and periodic replacement in pairs can help sustain consistent mowing results.\u003c\/p\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 2 mulching blades\u003c\/li\u003e\n  \u003cli\u003eDeck compatibility: 42\" decks\u003c\/li\u003e\n  \u003cli\u003eDimensions: Length 21 3\/4\", Width 2 1\/4\", Center Hole 7\/16\", Thickness 0.16\"\u003c\/li\u003e\n  \u003cli\u003eNote: Verify spindle hub pattern and original blade measurements to ensure proper fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eReal-World Use Scenarios\u003c\/h3\u003e\n\u003cp\u003eImagine a weekend yard cleanup where clippings are finely mulched and left to nourish the lawn. The blades are designed to deliver a balanced cutting action that helps reduce clumping and promote an even appearance across the lawn. In gardens with light debris or irregular edges, the stable performance aims to minimize vibration and maintain a smooth mowing rhythm, contributing to a steadier overall mowing session.\u003c\/p\u003e\n\n\u003ch3\u003eSummary\u003c\/h3\u003e\n\u003cp\u003eFourtry offers a practical two-pack solution aimed at compatible Toro 42-inch decks and Time Cutter models. The combination of durable construction, pre-sharpened edges, and a wear-away protective coating can support ongoing mowing tasks without frequent downtime. While results can vary with lawn conditions, these blades present a thoughtful option for maintaining sharp cutting action and tidy clippings over time.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Toro and Time Cutter models are compatible with Fourtry mulching blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Toro 42-inch decks and listed Time Cutter models; verify fit by comparing spindle hub pattern and blade measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How should I install the blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Blades arrive pre-sharpened with a protective coating; installation is described as tool-free and should follow manufacturer guidelines for proper replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43982902362246,"sku":"B0D4ZDXSMS","price":46.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-toro-42-deck-mulching-blade-2-pack.jpg?v=1778772604"},{"product_id":"fourtry-spindle-with-pulley-2-pack-for-craftsman-poulan-pro-husqvarna-mowers","title":"Fourtry Spindle with Pulley – 2 Pack for Craftsman, Poulan Pro \u0026 Husqvarna Mowers","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eUpgrade your mower’s mandrel with the Fourtry Spindle with Pulley kit. This two‑pack is designed to replace worn components on a range of compatible riding and lawn tractors, helping you maintain smooth blade rotation and reliable belt alignment without the guesswork of model matching.\u003c\/p\u003e\n\u003ch2\u003eCompatibility at a Glance\u003c\/h2\u003e\n\u003cp\u003eDesigned to fit a broad set of popular brands and deck sizes, this kit references OEM part numbers to help you confirm compatibility before you buy. The assembly and pulley work with many Craftsman, Poulan Pro, and Husqvarna models, along with other brands that use the same mounting concepts and part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCraftsman: LT1000, LT2000, LT4000, LTX1000, DYT4000 and additional 36\"\/38\"\/42\" decks\u003c\/li\u003e\n  \u003cli\u003ePoulan Pro: PB1842LT, PB18542LT, PB19H42LT riding mowers\u003c\/li\u003e\n  \u003cli\u003eHusqvarna: HU CT130, CTH150, LT130, LTH145, YT150, YTH130, YTH150\u003c\/li\u003e\n  \u003cli\u003eOther compatible brands: Ryobi, AYP, Sears, Roper, Weedeater, Yardpro and Wizard with matching part numbers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2 spindle assemblies with housings (height 7\", mounting hole center distance 4 4\/5\")\u003c\/li\u003e\n  \u003cli\u003e2 pulleys (diameter 5\", width 6\/7\")\u003c\/li\u003e\n  \u003cli\u003e2 shafts with sealed bearings and 5‑point star blade mounts\u003c\/li\u003e\n  \u003cli\u003eMounting hardware: 6 self‑tapping bolts, 2 pulley nuts, 2 blade bolts, 4 flat washers, 2 split lock washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eEasy to Install\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eStep 1: Remove the deck with pliers to pry off cotter pins;\u003c\/li\u003e\n  \u003cli\u003eStep 2: Remove the blade, three screws and the pulley nut with the included wrench;\u003c\/li\u003e\n  \u003cli\u003eStep 3: Install the new mandrel assembly with pulley, then secure the belt, pulley and blade.\u003c\/li\u003e\n  \u003cli\u003eNote: one flat washer sits under the pulley and a lock washer sits beneath the blade bolt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Consider This Kit\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo assemblies in one purchase for quick replacements or spares, reducing downtime\u003c\/li\u003e\n  \u003cli\u003eComprehensive hardware and blade mount support for a secure, stable setup\u003c\/li\u003e\n  \u003cli\u003eClear part-number guidance helps you verify fit across multiple brands and models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhile this kit is designed to cover a wide range of mowers, always double‑check your model’s part numbers and dimensions to ensure a precise fit. Fourtry aims to provide robust, easy‑to‑install parts that support dependable mowing days and straightforward maintenance. The benefits described here are potential outcomes based on the kit’s design and included components, not guarantees.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mowers is this spindle with pulley kit compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Craftsman, Poulan Pro, and Husqvarna models with matching part numbers; verify your model and numbers before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Two spindle assemblies with housings, two pulleys, two shafts with bearings, blade mount, and complete mounting hardware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43983068594310,"sku":"B0CSFVZ7Y9","price":64.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-spindle-assembly-with-pulley-for-craftsman-lt1000.jpg?v=1778777241"},{"product_id":"fourtry-742-04415-high-lift-mower-blades-3-pack-for-cub-cadet-60-deck-ds60-tank60-pro-z100","title":"Fourtry 742-04415 High Lift Mower Blades – 3 Pack for Cub Cadet 60\" Deck DS60, Tank60, PRO Z100","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eMeet Fourtry's 742-04415 High Lift Mower Blades, designed as a practical replacement for Cub Cadet 60-inch deck systems and related models. This 3-pack aligns with common part numbers (742-04415, 942-04415, 01005338, 01005338P, 02005019). Please verify your blade part number before ordering to ensure a proper match.\u003c\/p\u003e\n\u003ch3\u003eWhat makes them stand out\u003c\/h3\u003e\n\u003cp\u003eThe high lift geometry creates vertical lift that enhances airflow across the blade and supports clipping management. In everyday mowing, this design can aid bagging and clipping release, particularly on taller grass, while helping minimize discharge chute clogs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty metal construction stands up to wet, rocky, and uneven turf conditions\u003c\/li\u003e\n\u003cli\u003eMaintains a level, even cut across irregular surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits Cub Cadet DS60 and M60 family variants (CT, KH, ROPS, EFI, KW, LC, KW ROPS)\u003c\/li\u003e\n\u003cli\u003eAlso compatible with Tank 60, Tank L60KH, Tank LZ-60KH\u003c\/li\u003e\n\u003cli\u003eMatches PRO Z 100 EFI 160-L and 160-S platforms\u003c\/li\u003e\n\u003cli\u003eAdditional compatibility with select MTD, Toro, and Troy-Bilt 60-inch decks\u003c\/li\u003e\n\u003cli\u003ePackage includes 3 blades for routine replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation and care\u003c\/h3\u003e\n\u003cp\u003eInstall in minutes using a torque wrench and standard bolts. Ensure the cutting edges face the same direction before tightening. The blades arrive with a powder coating for safety; over time the coating wears away to reveal the true edge, which reduces the need for separate sharpening.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBlade length: 21 1\/16 inches\u003c\/li\u003e\n\u003cli\u003eWidth: 3 inches\u003c\/li\u003e\n\u003cli\u003eThickness: 0.210 inches\u003c\/li\u003e\n\u003cli\u003eCenter hole: 3\/4 inch\u003c\/li\u003e\n\u003cli\u003eLawnmower deck compatibility: 60 inches\u003c\/li\u003e\n\u003cli\u003ePackaging: 3 blades per pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn everyday use, these blades may contribute to more consistent clipping management and mowing efficiency. Real-life scenarios often include smoother bagging, cleaner edges, and quicker deck clearing when switching to a high lift blade during seasonal maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this blade compatible with my Cub Cadet model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your blade part number; this pack supports many Cub Cadet and related models listed (742-04415, 942-04415, 01005338, 01005338P, 02005019).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the blade sold as a single blade or a pack?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This is a 3-pack of high lift blades for 60-inch decks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43983159132294,"sku":"B0CR3YFYQ4","price":55.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-high-lift-mower-blade-21-1-16-inch-cub-cadet-60-deck.jpg?v=1778779976"},{"product_id":"fourtry-hi-lift-mower-blades-60-inch-deck-exmark-compatible-103-6403-103-6383-series-3-pack","title":"Fourtry Hi Lift Mower Blades 60-inch Deck | Exmark Compatible 103-6403 103-6383 Series (3 Pack)","description":"\u003cdiv class=\"seo-copy\"\u003e\n  \u003ch2\u003eOverview\u003c\/h2\u003e\n  \u003cp\u003eFourtry hi lift mower blades are built to perform on 60 inch Exmark decks and are compatible with Laser HP and Laser Z series models. This 3 pack provides ready to use replacements designed to help you maintain a clean, even cut across diverse grass conditions without unnecessary downtime. The blades are engineered to deliver steady engagement with the turf, offering reliable performance across typical residential and light commercial mowing tasks. While results can vary with lawn type and mowing technique, these blades are positioned as dependable options for routine maintenance and seasonal blade refreshment.\u003c\/p\u003e\n  \u003ch3\u003ePremium build and design\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eHigh tensile steel construction with precision tempered edges for extended sharpness.\u003c\/li\u003e\n    \u003cli\u003eOptimized geometry and balanced weight reduce vibration and promote smooth operation.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eEasy setup and maintenance\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003ePre sharpened and coated with a protective layer that wears off after initial use for a clean start.\u003c\/li\u003e\n    \u003cli\u003eTool-less installation: align the cutting edge downward and secure according to your mower’s guidelines.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eBundle and compatibility\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eIncludes 3 blades sized for 60 inch decks with a round spindle hub pattern for broad compatibility.\u003c\/li\u003e\n    \u003cli\u003eCross reference part numbers cover Exmark and Laser series; verify your mower specs before purchasing.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eReal world use often shows smoother engagement when cutting dense turf or trimming along edges. The blade geometry supports consistent performance across varied grass conditions, while the coating and initial sharpness help minimize downtime between replacements. This bundle is a practical option for homeowners or professionals seeking reliable replacements that fit common mid size mower configurations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which mower models are these blades compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for 60-inch Exmark decks and Laser series; check your mower’s specifications to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I install and maintain these blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They’re pre-sharpened and coated; install with the edge downward and follow your mower’s replacement procedures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43983165587590,"sku":"B0D4ZCWVL2","price":61.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-high-lift-blade-103-6403-cross-reference.jpg?v=1778780119"},{"product_id":"fourtry-503220001-chainsaw-bar-nut-10-pack-fits-husqvarna-rancher-450-455-460-and-poulan-craftsman-es300-cs490","title":"Fourtry 503220001 Chainsaw Bar Nut – 10-Pack, Fits Husqvarna Rancher 450\/455\/460 and Poulan\/Craftsman ES300 CS490","description":"\u003ch2\u003eReliable bar nut replacement for busy workdays\u003c\/h2\u003e\n\u003cp\u003eThe Fourtry 503220001 bar nut is a direct replacement designed to align with OEM part numbers 530015917, 503220001, and 531300382. Built to secure your chainsaw’s guide bar, it helps maintain proper alignment as you cut, trim, or Clear brush. This is not a promise of faster results, but a thoughtful component designed to support steadier performance during demanding tasks.\u003c\/p\u003e\n\u003ch3\u003eWhy this bar nut matters\u003c\/h3\u003e\n\u003cp\u003eIn the middle of a long cut, a securely threaded bar nut matters. The Fourtry nut features precise threading that reduces loosening from high vibration, helping keep the guide bar steady and on target. This means fewer interruptions to re-tighten or replace parts, and a smoother cutting rhythm when you’re tackling tough wood or dense brush.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement part numbers: 530015917, 503220001, 531300382 — a trustworthy OEM-aligned option.\u003c\/li\u003e\n  \u003cli\u003eFirm holding design: well-tapped threads help maintain guide bar alignment under load.\u003c\/li\u003e\n  \u003cli\u003eCompatibility breadth: designed to fit a range of Poulan, Husqvarna Rancher, and Craftsman models listed in the description.\u003c\/li\u003e\n  \u003cli\u003ePlus a spare mindset: 10 nuts in each pack provide ready replacements for maintenance or on-site fixes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility at a glance\u003c\/h3\u003e\n\u003cp\u003eThis bar nut is intended for use with Husqvarna Rancher models 450, 455, and 460, plus Poulan 810EPT, 1900, 2050, 2150 Type 1-7, and Craftsman equivalents 358351710 and 358351181. If you’re maintaining multiple saws or rotating between jobs, this broad compatibility can simplify stocking and repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEach nut measures 8 mm x 13 mm (hex style) for a precise fit with compatible bars.\u003c\/li\u003e\n  \u003cli\u003e10-pack provides multiple spares for ongoing upkeep or emergency replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhether you’re pruning a landscape, preparing firewood, or tackling heavy timber, the Fourtry bar nut is a practical component to keep on hand. It’s a compact, low-profile part that can help you stay focused on the task at hand rather than hunting for replacements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models is the Fourtry 503220001 bar nut compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Husqvarna Rancher 450\/455\/460, Poulan 810EPT, 1900, 2050, 2150 Type 1-7, and Craftsman 358351710\/358351181.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What do I get in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A 10-pack of bar nuts (8 mm x 13 mm hex), designed as direct replacements for 530015917, 503220001, and 531300382.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43987146702982,"sku":"B09DKHZYJJ","price":20.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-503220001-bar-nut-direct-replacement.jpg?v=1778835006"},{"product_id":"fourtry-532405143-deck-belt-for-craftsman-46-inch-riding-mower","title":"Fourtry 532405143 Deck Belt for Craftsman 46-inch Riding Mower","description":"\u003ch2\u003eUpgrade Your 46-inch Deck with the Fourtry 532405143 Deck Belt\u003c\/h2\u003e\n\u003cp\u003eDesigned for dependable performance, this deck belt is crafted from a flexible rubber compound that works in concert with pulley assemblies to transfer engine power to your mower blades. Rather than a one-size-fits-all approach, this belt is tuned to fit a broad range of 46-inch deck models, offering a practical upgrade for common riding mowers without forcing a full rewire or overhaul.\u003c\/p\u003e\n\u003ch3\u003eCompatibility at a glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHusqvarna families commonly used with 46-inch decks, including several PB and YT series variants, are supported where the OEM size aligns with 1\/2 inch by 105 3\/4 inches.\u003c\/li\u003e\n  \u003cli\u003ePoulan compatible options within the 46-inch range, featuring models that pair with 46-inch decks, are covered when OEM numbers match.\u003c\/li\u003e\n  \u003cli\u003eCraftsman deck configurations that rely on a 46-inch deck are supported, with several listed OEMs replaced by this belt when dimensions and pulleys align.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFit, size, and installation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eExact size for compatibility: 1\/2 inch wide by 105 3\/4 inches long, designed to align with 46-inch cut decks.\u003c\/li\u003e\n  \u003cli\u003eEasy installation process that fits in place with common pulley assemblies, helping you get back to mowing more quickly.\u003c\/li\u003e\n  \u003cli\u003eReplaces multiple OEM part numbers, providing a versatile option when you’re comparing brands or sourcing parts online.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat to know before you buy\u003c\/h3\u003e\n\u003cp\u003eBefore purchasing, check your mower’s OEM number and confirm the 46-inch deck configuration. While this belt covers a wide range of models, exact fit depends on pulley arrangement and deck size. Consider pairing with a quick inspection of the belt path to ensure proper seating and tension.\u003c\/p\u003e\n\u003cp\u003ePotential benefits you might notice include smooth engagement with the blades, more consistent cutting performance, and a straightforward replacement that keeps downtime to a minimum. These outcomes are possibilities based on fit and installation accuracy, not guarantees.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models does the Fourtry 532405143 deck belt fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits many 46-inch deck mowers, including Craftsman, Husqvarna, and Poulan variants with matching dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know this belt matches my mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check the belt size (1\/2 in x 105 3\/4 in) and confirm your mower’s OEM part number for alignment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43989170749574,"sku":"B09BC8Y5VQ","price":20.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-deck-belt-46in-craftsman-assembly.jpg?v=1778858737"},{"product_id":"fourtry-194327-flat-idler-pulley-replacement-for-craftsman-husqvarna-poulan-2-pack","title":"Fourtry 194327 Flat Idler Pulley — Replacement for Craftsman Husqvarna Poulan (2 Pack)","description":"\u003cp\u003eFind a sturdy, direct replacement for your lawn tractor drive belt with the Fourtry 194327 flat idler pulley. This part is designed to mirror OEM numbers 194327, 532194327, and 280-6630, helping maintain consistent belt tension across a range of mower brands. The two-pack format provides ready-to-use spares for ongoing maintenance or multi-tractor setups, with a focus on reliable, quiet operation during routine lawn care.\u003c\/p\u003e\n\n\u003cp\u003eBuilt for versatile outdoor use, this idler fits Craftsman models with 42\" or 54\" decks, Husqvarna ride-on mowers, Poulan lawn tractors, and Weed Eater units listed in the product notes. Always verify your OEM numbers to ensure compatibility before installation.\u003c\/p\u003e\n\n\u003ch2\u003eKey benefits and features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for common OEM numbers to simplify upgrades and repairs\u003c\/li\u003e\n  \u003cli\u003ePre-greased sealed bearing supports quiet, smooth rotation and steady belt tension\u003c\/li\u003e\n  \u003cli\u003eRigid hard plastic construction withstands outdoor exposure and everyday bumps\u003c\/li\u003e\n  \u003cli\u003eTwo-pulley pack offers convenient parts for maintenance or multi-tractor use\u003c\/li\u003e\n  \u003cli\u003eBroad compatibility with Craftsman, Husqvarna, Poulan, and Weed Eater models as noted\u003c\/li\u003e\n  \u003cli\u003eCompact packaging and precise dimensions make installation straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecs at a glance\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHeight: 1-3\/10 inches (1.3\")\u003c\/li\u003e\n  \u003cli\u003eInner diameter: 3\/10 inch (0.3\")\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: 3-1\/2 inches (3.5\")\u003c\/li\u003e\n  \u003cli\u003eIncludes: 2 idler pulleys per pack\u003c\/li\u003e\n  \u003cli\u003ePackaging: 4.1 x 4 x 3.2 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eUsage notes: This pulley is designed as a direct substitute to maintain belt alignment and tension. If you’re refreshing a worn drive system, consider pairing with other compatible components for a refreshed mowing experience. While results can vary by model and operating conditions, many users notice steadier belt behavior and reduced belt strain during regular maintenance checks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which mower models are compatible with the Fourtry 194327 flat idler pulley?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with Craftsman, Husqvarna, Poulan, and Weed Eater tractors listed in product details; check your OEM numbers to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What does the pack include and is installation easy?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The pack contains two pulleys with pre-greased bearings; straightforward swap for compatible belts, no special tools required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43989444493446,"sku":"B0CSFL51KL","price":22.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-194327-flat-idler-pulley-replacement-pack.jpg?v=1778868440"},{"product_id":"fourtry-ac04215-edger-blades-3-pack-8-inch-x-2-inch-serrated-replacement-with-1-inch-center-hole-for-ryobi-ut50500-ut15518","title":"Fourtry AC04215 Edger Blades 3-Pack – 8-inch x 2-inch Serrated Replacement with 1-inch Center Hole for Ryobi UT50500 UT15518","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eRefresh your lawn edges with Fourtry AC04215 Edger Blades. This 3-pack features blades that are 8 inches long by 2 inches wide and include a 1-inch center hole for a reliable bolt-on fit. They’re a direct replacement for common Ryobi parts, combining rugged durability with precise cutting capability to help you achieve a clean, professional edge after every pass.\u003c\/p\u003e\u003cp\u003eWhen you install a fresh blade, you’ll notice the cool steel and sharp serrated edge that bites into turf with controlled vigor. In daily use, these blades produce crisp, defined borders along driveways, paths, and garden beds, contributing to a well-groomed lawn appearance without requiring extra effort.\u003c\/p\u003e\u003ch2\u003eWhy choose this 3-pack\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement for OEM AC04215 and 818-928, simplifying maintenance\u003c\/li\u003e\n\u003cli\u003eFits Ryobi edger models such as UT50500, UT15518, RY15518, RYEDG11, P2310, and P2300B\u003c\/li\u003e\n\u003cli\u003e1-inch center hole ensures a snug, secure mounting during operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance and durability\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSharp serrated edges deliver precise, even cuts with less edging time\u003c\/li\u003e\n\u003cli\u003eDurable steel construction withstands regular edging work and seasonal use\u003c\/li\u003e\n\u003cli\u003eThree blades in the set provide ready replacements to extend edging sessions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and real-world use\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEasy bolt-on installation for quick blade swaps\u003c\/li\u003e\n\u003cli\u003eSuitable for a range of Ryobi edger models, offering flexible use\u003c\/li\u003e\n\u003cli\u003eCreates clean borders along lawns, sidewalks, and garden borders with consistent results\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn daily lawn care, a reliable blade set like Fourtry AC04215 can help you maintain crisp lines between mowing sessions. The combination of sturdy steel, serrated edge performance, and a practical three-pack design makes it a sensible option for homeowners who value dependable edging without complex maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a direct replacement for OEM part numbers AC04215 and 818-928?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, these blades directly replace AC04215 and 818-928 on compatible Ryobi edgers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which models are compatible and how many blades come in the set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 3-pack fits Ryobi UT50500 UT15518 RY15518 RYEDG11 P2310 P2300B, offering multiple blades for ongoing edging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43989480898694,"sku":"B0GDWJPQTL","price":22.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-ac04215-edger-blades-3-pack-8-inch-center-hole.jpg?v=1778869704"},{"product_id":"fourtry-mulching-blades-120-9500-03-for-toro-ex-mark-30-inch-deck-2-pack","title":"Fourtry Mulching Blades 120-9500-03 for Toro Ex Mark 30-inch Deck — 2 Pack","description":"\u003ch2\u003eEnhance Your Lawn Care with Fourtry Mulching Blades\u003c\/h2\u003e\n\u003cp\u003eUpgrade your mower with the Fourtry 120-9500-03 mulching blades. This two-pack is designed as a reliable replacement for a broad range of part numbers and several Toro and Exmark models. Before purchasing, please confirm your original part number and spindle pattern to ensure a proper fit. The result can be a smoother mowing experience and neater lawn with less post-mow cleanup.\u003c\/p\u003e\n\u003cp\u003eThese blades feature a durable powder-coated finish to help resist rust and a longer cutting surface that can improve mowing efficiency. The toothed design helps break down grass clippings into finer pieces, which can simplify aftercare and contribute to a tidy lawn appearance over time.\u003c\/p\u003e\n\u003ch3\u003eCompatibility and Fit\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement options include 116-6358-03, 116-6358, 116-6358-S, 120-9500, 1209500-03, 120-9500-S, 20120, 20120P, 20122P.\u003c\/li\u003e\n  \u003cli\u003eCompatible with a variety of Toro and Exmark models such as 20199, 22205TE, ECKA30, ECS180CKA30000, and ECX series. Check product description for exact compatibility with your mower.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Benefits You May Notice\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eToothed mulching blades mulch grass into finer pieces, aiding upkeep and lawn texture.\u003c\/li\u003e\n  \u003cli\u003ePowder-coated finish helps reduce rust and can extend blade life with daily use.\u003c\/li\u003e\n  \u003cli\u003eExpanded cutting surface may contribute to mowing efficiency and a more even cut.\u003c\/li\u003e\n  \u003cli\u003eTwo blades per package provide ready replacements for busy seasons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Kit and How to Install\u003c\/h3\u003e\n\u003cp\u003eThe package includes two mulching blades with these dimensions: length 15 3\/8 inches, width 2 1\/4 inches, center mounting hole 11\/16 inch, outer holes 5\/16 inch, thickness 0.156 inch. The blades use a round center mounting hole. For installation, turn the mower upside down, secure the old blade, remove the bolt and washer, swap in the replacement blade, align the assembly, and tighten the bolt according to the mower’s instructions.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models are these blades compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: These blades fit Toro and Exmark mowers listed in the description, including 20199, 22205TE, 120-9500, and ECKA30; verify your part number and spindle pattern.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How easy is the installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The blades replace the old ones by removing the bolt and washer, then securing the new blade following the mower's manual.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43989697331334,"sku":"B0CQRFYBPY","price":27.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-mulching-blades-120-9500-03-toro-ex-mark-30-deck.jpg?v=1778880295"},{"product_id":"fourtry-942-0640-blade-for-20-inch-deck-mtd-yard-machines-replacement","title":"Fourtry 942-0640 Blade for 20-inch Deck MTD Yard Machines — Replacement","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eWhen it's time to refresh your mower's cutting edge, the Fourtry 942-0640 blade is designed to slot into most 20-inch deck walk-behinds. It is a direct replacement that aligns with common shaft specs and OEM numbers, helping you maintain clean, even cuts with less downtime.\u003c\/p\u003e\n\u003ch3\u003eCompatibility at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with 20-inch Deck MTD Yard Machines Walk Behinds\u003c\/li\u003e\n\u003cli\u003eCompatible with 20-inch MTD Columbia Walk Behinds\u003c\/li\u003e\n\u003cli\u003eCompatible with 20-inch MTD Bolens Walk Behinds\u003c\/li\u003e\n\u003cli\u003eReplaces OEM numbers: 942-0640, 490-100-M115, 742-0640, OEM-742-0640\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign and durability\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced cutting technology features precision-cutting edges that stay sharp longer\u003c\/li\u003e\n\u003cli\u003eProtective finish helps prevent accidental contact during handling\u003c\/li\u003e\n\u003cli\u003eMaintains consistent performance through repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExact dimensions are 19.8 inches in length, 2.15 inches in width, and 0.15 inches in thickness. The 0.71 center hole pattern matches standard mower shaft specifications, ensuring a proper fit.\u003c\/p\u003e\n\u003cp\u003eWhat you get is a straightforward replacement that pairs with 942-0640 models and a commitment to helpful support should you have installation questions.\u003c\/p\u003e\n\u003ch3\u003eReal-world use and benefits\u003c\/h3\u003e\n\u003cp\u003eFarmers, homeowners, and property managers value a quick blade swap during mowing season. A fresh edge can help deliver a cleaner cut, improved grass lift, and smoother riding experience on compatible machines, with less downtime between sessions.\u003c\/p\u003e\n\u003ch3\u003eWhat’s included and how to install\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x replacement blade\u003c\/li\u003e\n\u003cli\u003eResponsive customer support for installation or product questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Follow your mower manual for safety steps and torque guidance. The center hole pattern is designed for standard shaft fits and may require proper alignment during mounting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What machines is this blade compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with 20-inch deck MTD Yard Machines Walk Behinds and select 20-inch MTD Columbia and Bolens models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included and how do I install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Includes 1 blade; confirms 0.71 center hole fit. For installation, follow the mower manual or contact a professional.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43989716500614,"sku":"B0DZWHDCMH","price":29.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-942-0640-blade-20-inch-deck.jpg?v=1778881383"},{"product_id":"fourtry-594062-recoil-starter-for-b-s-lawn-mower-engines-compatible-093j02-103m02-104m02","title":"Fourtry 594062 Recoil Starter for B\u0026S Lawn Mower Engines – Compatible 093J02\/103M02\/104M02","description":"\u003cdiv\u003e\n  \u003ch2\u003eOverview\u003c\/h2\u003e\n  \u003cp\u003eThe Fourtry 594062 Recoil Starter is a purpose-built pull-start component designed to replace worn or missing starters on Briggs \u0026amp; Stratton lawn mower engines. This part bears the 594062 designation and is compatible with a broad range of Briggs \u0026amp; Stratton small engines, providing a practical option to restore ease of use without replacing the entire starter system.\u003c\/p\u003e\n  \u003ch2\u003eKey compatibility and replacement notes\u003c\/h2\u003e\n  \u003cp\u003eThis model is intended to work with Briggs \u0026amp; Stratton engines and the key family lines listed in the product details. The replacement part number is 594062, and the kit is designed to align with mounting patterns and rope dimensions common to many Briggs \u0026amp; Stratton variants.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eReplacement Part Number: 594062\u003c\/li\u003e\n    \u003cli\u003eCompatible with Briggs \u0026amp; Stratton families including 093J02, 103M02, 103M05, 103M0B, and 104M02 (full range in description)\u003c\/li\u003e\n    \u003cli\u003eHigh-quality manufacturing and testing ensure stable, durable performance over time\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eIn practice, homeowners often encounter pull-starts that feel stiff or fail to rewind smoothly. The Fourtry 594062 is built to meet professional standards for reliable starts and lasting durability, even after repeated use.\u003c\/p\u003e\n  \u003ch3\u003eBuild quality and materials\u003c\/h3\u003e\n  \u003cp\u003eThe recoil starter is crafted by a professional factory and undergoes rigorous testing to ensure stable operation. The design emphasizes a sturdy reel and rope assembly, ready for everyday lawn maintenance tasks.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eSturdy construction with a robust rope and housing\u003c\/li\u003e\n    \u003cli\u003eStandard mounting holes align with common Briggs \u0026amp; Stratton patterns\u003c\/li\u003e\n    \u003cli\u003eRope length supports comfortable reach during starting\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eWhat you gain from this replacement is a practical, ready-to-install part that can help you resume mowing with a familiar, intuitive pull. It’s a sensible option when the original starter shows wear or when you’re stocking spare parts for routine service.\u003c\/p\u003e\n  \u003ch3\u003eSpecifications at a glance\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003ePackage includes: 1x 594062 Recoil Starter\u003c\/li\u003e\n    \u003cli\u003eDimensions: approximately 12.2\" L x 8.74\" W; Mount hole spacing 8.46\" x 7.48\"\u003c\/li\u003e\n    \u003cli\u003eRope extendable up to 70\"\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eNote: Always verify model compatibility against your engine’s numbers before purchase to ensure a seamless fit and reliable operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models is the 594062 recoil starter compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Briggs \u0026amp; Stratton models in the 093J02, 103M02, 103M05, 103M0B, and 104M02 families; see the listing for full compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included and installation like?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One 594062 recoil starter with standard mounting holes; straightforward swap, with mounting dimensions provided to guide fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43989857370246,"sku":"B0D636M54H","price":31.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-594062-recoil-starter-front-view.jpg?v=1778888738"},{"product_id":"fourtry-116-4667-flat-idler-pulley-for-exmark-lazer-z-and-toro-z-master-decks","title":"Fourtry 116-4667 Flat Idler Pulley for Exmark Lazer Z and Toro Z Master Decks","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eWhen a mower deck idler wears out or loses efficiency, the Fourtry 116-4667 Flat Idler Pulley offers a dependable replacement option designed for Exmark Lazer Z and Toro Z Master decks. Built to support smooth belt operation, it features a pre-greased sealed bearing and a sturdy body to help minimize resistance and reduce vibration during mowing tasks. This is a practical upgrade for routine maintenance, aiming to keep your deck running closer to its original performance without making guarantees about outcomes.\u003c\/p\u003e\u003ch3\u003eCompatibility at a glance\u003c\/h3\u003e\u003cp\u003eThe idler is designed to fit a broad range of Exmark and Toro configurations, making it a versatile choice for multiple setups:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExmark Lazer Z 52-inch, 60-inch, and 72-inch AS HP zero-turn mowers; Lazer Z XS; E series; X series diesel zero-turn units; 60-inch Turf Tracer X series walk-behind; 52-inch Vantage stand-on\u003c\/li\u003e\n\u003cli\u003eToro Z Master zero-turn mowers including models such as 74237, 74242, 74250, 74261, 74271, 74282, 74413, 74449, 74237CP, 74246T\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cp\u003eEach package includes one replacement deck idler pulley with precise dimensions to help you confirm fit before swapping:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOD: 6 3\/4 inches\u003c\/li\u003e\n\u003cli\u003eID: 2\/3 inch\u003c\/li\u003e\n\u003cli\u003eWidth: 1 1\/5 inches\u003c\/li\u003e\n\u003cli\u003eFlat Width: 3\/4 inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey benefits in use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSealed, pre-greased bearing helps minimize lubricant escape and supports smoother belt movement\u003c\/li\u003e\n\u003cli\u003eFlat profile designed for stable seating in the deck system, reducing vibrations\u003c\/li\u003e\n\u003cli\u003eEasy to install with a standard wrench, no specialized tools required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFit and installation tips\u003c\/h3\u003e\u003cp\u003eDouble check the idler sits within the deck system, as there are multiple idler sizes used across mower models. Verify the part number and description to ensure the correct fit.\u003c\/p\u003e\u003ch3\u003eWhy choose Fourtry\u003c\/h3\u003e\u003cp\u003eFourtry focuses on reliable, field-ready replacements that align with original specifications. This idler is a practical option for routine maintenance or belt alignment checks, offering potential improvements in efficiency and consistent cutting performance without overpromising results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models is the Fourtry 116-4667 Flat Idler Pulley compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with Exmark Lazer Z 52-, 60-, 72-inch AS HP zero-turns, Lazer Z XS and X\/E series, 60-inch Turf Tracer X series, 52-inch Vantage stand-on, and Toro Z Master models including 74237, 74242, 74250, 74261, 74271, 74282, 74413, 74449, 74237CP, 74246T.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation difficult?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Not difficult—use a standard wrench and verify the idler sits within the deck system to ensure proper belt alignment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43989889024134,"sku":"B09D77KN6T","price":26.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-116-4667-flat-idler-pulley.jpg?v=1778890443"},{"product_id":"fourtry-117-7439-spindle-assembly-for-toro-time-cutter-exmark-quest-2-pack","title":"Fourtry 117-7439 Spindle Assembly for Toro Time Cutter \u0026 Exmark Quest – 2-Pack","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eReplace a worn spindle with a robust Fourtry spindle designed to fit Toro Time Cutter 42-50-inch decks, as well as Exmark Quest models. The 117-7439 compatibility spans several OEM part numbers for a seamless swap.\u003c\/p\u003e\n\u003cp\u003eBuilt to perform in outdoor lawn mowing sessions, the two-pack kit arrives pre-greased with a built-in sealed bearing, reducing prep time and helping your mower resume operation quickly after service.\u003c\/p\u003e\n\n\u003ch3\u003eWhy it matters\u003c\/h3\u003e\n\u003cp\u003eWith a direct swap design, the spindle assembly supports reliable deck rotation and balanced cutting, which can contribute to a smoother mowing experience and consistent blade alignment over time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatibility: Toro Time Cutter 42-50-inch models (5000, 5060, 4200, 4220, 4225, 4235, 4216, 4260) and Exmark Quest 42-50-inch decks.\u003c\/li\u003e\n  \u003cli\u003ePhysical specs: mounting hole distance 5.43 inches, height 5.47 inches, ensuring a precise fit in many zero-turn decks.\u003c\/li\u003e\n  \u003cli\u003eIncluded hardware: pulley lock nut, rubber ring, and four mounting bolts for a straightforward installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x deck spindle assemblies\u003c\/li\u003e\n  \u003cli\u003e1 x pulley lock nut\u003c\/li\u003e\n  \u003cli\u003e1 x rubber ring\u003c\/li\u003e\n  \u003cli\u003e4 x mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and capabilities\u003c\/h3\u003e\n\u003cp\u003eThe pre-greased design and sealed bearings allow for quicker on-site setup, while corrosion-resistant materials help withstand outdoor conditions. The assembly is designed to be a practical replacement that simplifies routine maintenance for zero-turn mowers.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to expect in real life\u003c\/h3\u003e\n\u003cp\u003eWhen swapping a worn spindle, you may notice improved blade stability and a smoother deck rotation. This can translate to more even cut patterns and less downtime during mowing sessions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models does this spindle fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Toro Time Cutter 42- and 50-inch decks (models 5000, 5060, 4200, 4220, 4225, 4235, 4216, 4260) and Exmark Quest 42- and 50-inch decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A two-pack spindle with pre-greased bearings, plus pulley lock nut, rubber ring, and mounting bolts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fourtry","offers":[{"title":"Default Title","offer_id":43996538536070,"sku":"B0CSFLXY4D","price":83.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/fourtry-spindle-assembly-toro-time-cutter-42-50-inch.jpg?v=1779163742"}],"url":"https:\/\/patiozora.com\/collections\/brand-fourtry.oembed","provider":"PatioZora","version":"1.0","type":"link"}