{"title":"IDEASURE — Mower Blades","description":"\u003cp\u003e\u003cstrong\u003eIDEASURE\u003c\/strong\u003e accounts for 40 listings in the PatioZora catalog, concentrated in blades (31 products) and pool hoses (4). Replacement mower blades listed by deck width and OEM part number, in high-lift, mulching and 2-in-1 patterns. Order on the number stamped on the old blade or the deck decal, and replace blades in matched sets so the deck stays balanced.\u003c\/p\u003e\u003cp\u003ePrices across this range run from about $17.51 to $55.04, with the middle of the range near $38.61. Free US shipping on every order.\u003c\/p\u003e","products":[{"product_id":"ideasure-1-1-4-inch-pool-hoses-3ft-2-pack-above-ground-pool-return-suction-hose-compatible-with-intex-coleman-summer-waves","title":"IDEASURE 1-1\/4-Inch Pool Hoses, 3ft - 2 Pack, Above Ground Pool Return\/Suction Hose, Compatible with Intex, Coleman, Summer Waves","description":"\u003ch2\u003eElevate Your Above-Ground Pool Maintenance with IDEASURE 1-1\/4\" Hose\u003c\/h2\u003e\n\u003cp\u003eMeet IDEASURE’s 1-1\/4\" pool hoses, a practical replacement option designed to keep water flow steady around your pool’s skimmers and pumps. Built to fit common 1-1\/4\" fittings, these hoses are crafted for quick, tool-free setup and reliable performance. If you’re swapping worn hoses or refreshing a seasonal setup, this 2-pack gives you ready backups that couple well with many popular above-ground pool systems.\u003c\/p\u003e\n\u003ch3\u003eKey compatibility and use cases\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with standard 1-1\/4\" connectors used on Intex, Coleman, and Summer Waves hoses.\u003c\/li\u003e\n  \u003cli\u003e suitable as suction or return hose for surface skimmers, pool pumps, and pool filters that rely on 1-1\/4\" diameter lines.\u003c\/li\u003e\n  \u003cli\u003eDesigned for quick, slip-on installation without the need for special tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuality you can rely on\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMade from PE plastic with a corrugated body for flexibility and durable, leak-resistant performance.\u003c\/li\u003e\n  \u003cli\u003eLightweight and easy to maneuver around pool equipment, reducing setup effort.\u003c\/li\u003e\n  \u003cli\u003eLong-lasting construction intended for regular pool maintenance and seasonal use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs at a glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 1.25\" (31.7 mm); Length: 36\" (3 ft).\u003c\/li\u003e\n  \u003cli\u003eColor: White, designed to blend with typical pool equipment.\u003c\/li\u003e\n  \u003cli\u003ePackage: 2 hoses included in the set for convenient replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhether you’re refreshing an aging hose or keeping a spare on hand for busy pool seasons, IDEASURE hoses offer a practical balance of fit, flexibility, and ease of use. They’re a simple, practical part of pool upkeep that may help you maintain steady water flow and reliable skimmer performance—without overpromising results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these hoses compatible with my above-ground pool skimmer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit 1-1\/4 inch connectors and work with popular brands like Intex, Coleman, and Summer Waves.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the IDEASURE pool hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No tools are required — simply slip the hose onto existing fittings for a quick setup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43979451695238,"sku":"B0CFKN7K1C","price":30.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-1-1-4-inch-pool-hose-3ft.jpg?v=1778662519"},{"product_id":"ideasure-942-0741a-mulching-blade-for-21-inch-deck-compatible-with-troy-bilt-cub-cadet-mtd","title":"IDEASURE 942-0741A Mulching Blade for 21-Inch Deck — Compatible with Troy-Bilt, Cub Cadet, MTD","description":"\u003ch2\u003eEffortless mowing with a trusted mulching blade\u003c\/h2\u003e\n\u003cp\u003eMeet the IDEASURE 942-0741A mulching blade, designed to replace a broad set of legacy part numbers and restore peak cutting performance on 21-inch mower decks. This blade is built to deliver an even, consistent cut across a variety of grasses and terrains, helping your lawn look well-groomed after every pass. Its construction supports balanced spinning and disciplined mulch dispersion, turning clippings into a neat turf surface rather than a pile. While no claim guarantees results, users often notice smoother operation and a cleaner finish when upgrading to a dedicated mulching blade.\u003c\/p\u003e\n\u003ch3\u003eKey fit and compatibility\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers including 942-0741, 742-0741, 942-0641, 742-04276, and more, reducing compatibility guesswork.\u003c\/li\u003e\n  \u003cli\u003eBroad mower compatibility: Cub Cadet models such as CC439, CC469, CC949, CC989, CC997ES, CC46ES, CC46M, CC94M, CC98H, CC98M, SC300, SC500, SC700, and others.\u003c\/li\u003e\n  \u003cli\u003eMTD and Troy-Bilt series support: 410, RM105, RM110, RM120, RM210, RM220; Tru-Cut to TB 130 XP lines and related models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance and use\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEfficient cutting for an even, precise trim that helps lawns look uniform in a single pass.\u003c\/li\u003e\n  \u003cli\u003eDesigned for a balanced feel and smoother mowing on a mix of grasses, slopes, and uneven ground.\u003c\/li\u003e\n  \u003cli\u003eClear edge lines and tidier clippings as you move around borders, planters, and obstacles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNotes for buyers: Please verify your mower deck size and center hole diameter before ordering. This replacement blade fits 21-inch decks and ships as a single blade. Check the product description for additional fitment details and related models.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the IDEASURE 942-0741A mulching blade compatible with my mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many Cub Cadet, MTD, and Troy-Bilt models; verify deck size and center hole before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the blade dimensions and packing details?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: 21 inches long, 2-1\/4 inches wide, 0.126 inches thick, center hole 11\/16 inch; includes 1 blade per pack.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43979732615302,"sku":"B0DR8RMV1W","price":26.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-942-0741a-mulching-blade-21-inch-deck.jpg?v=1778671758"},{"product_id":"ideasure-138971-high-lift-blades-for-42-deck-2-pack-compatible-with-craftsman-husqvarna-poulan-lawn-tractors","title":"IDEASURE 138971 High Lift Blades for 42\" Deck – 2 Pack, Compatible with Craftsman, Husqvarna, Poulan Lawn Tractors","description":"\u003ch2\u003ePremium compatibility meets dependable mowing performance\u003c\/h2\u003e\n\u003cp\u003eIDEASURE 138971 high lift blades are engineered for consistent, confident mowing. Crafted from a single piece of thick steel, they resist bending and maintain a steady cutting edge through varied lawn textures. The high lift design helps air flow and grass clearance, supporting a cleaner finish and smoother operation across different grass types and conditions.\u003c\/p\u003e\n\u003ch3\u003eCompatibility and fit\u003c\/h3\u003e\n\u003cp\u003eThese blades fit 42 inch mower decks and replace a wide set of part numbers, making them a versatile choice for many popular brands. Typical compatibility spans Craftsman, Husqvarna, and Poulan models, including a range of LT, YT, YTH, and PXT series. For a precise fit, compare your deck’s length, width, thickness, and center mounting pattern with the specifications provided.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Part Number: 532138971, 532138498, 532127843, 531307224, 138971, 134149, 138498, 127843, CMXGZAM110136, PP24004.\u003c\/li\u003e\n  \u003cli\u003eFits 42 inch decks across multiple brand lines, including common Husqvarna, Craftsman, and Poulan tractors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat you get and how it helps\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x 21 inch high lift blades designed for an even, consistent cut across varied terrains.\u003c\/li\u003e\n  \u003cli\u003eThick, single piece steel construction for durability and longer service life under regular use.\u003c\/li\u003e\n  \u003cli\u003eCenter hole pattern with a five-point star for secure mounting and reliable alignment with the deck spindle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance, use cases, and care\u003c\/h3\u003e\n\u003cp\u003eOn real-world lawns, the high lift blades can help maintain airflow and clipping dispersion, which may contribute to a cleaner, more uniform look after mowing. The durable build supports repeated use through the season, while the precise cut helps reduce mulching and curb striping. Results can vary with lawn conditions, mower condition, and maintenance habits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBefore installation, ensure the blade length, width, thickness, and center hole match your mower’s specifications.\u003c\/li\u003e\n  \u003cli\u003eInstall with the mower powered off and the spark plug disconnected; tighten to the manufacturer’s torque guidelines.\u003c\/li\u003e\n  \u003cli\u003eRegularly inspect for nicks or wear and replace promptly to sustain mowing efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications: Length 21 inches, Width 2 1\/4 inches, Thickness 0.157 inches, Center hole: 5-point star. The 2-pack setup means you can replace blades in pairs for balanced performance and reduced downtime.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included in the IDEASURE 138971 2-pack?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Two 21-inch high lift blades with a 5-point star center hole.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I check compatibility with my mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare blade length, width, thickness, and center hole to your deck specifications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43979733991558,"sku":"B0DQWZT8BY","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-138971-high-lift-blade-42-inch-deck.jpg?v=1778671862"},{"product_id":"ideasure-25012-lawn-mower-blade-for-18-inch-deck-green-works-compatible-25012-2519402-33303463-1-pack","title":"IDEASURE 25012 Lawn Mower Blade for 18-Inch Deck – Green-Works Compatible (25012\/2519402\/33303463) | 1 Pack","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eUpgrade your green lawn care routine with the IDEASURE 25012 lawn mower blade, designed for 18-inch mower decks. This replacement blade is tailored to fit Green-Works models with 18-inch decks, including 25012, 2519402, and 33303463. A single piece of thick steel delivers a robust build, providing reliable performance when you need a steady, clean cut across your yard.\u003c\/p\u003e\n\n\u003ch3\u003eWhy this blade stands out\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility at a glance:\u003c\/strong\u003e Specifically built for Green-Works 18-inch mowers; models include 25012, 2519402, and 33303463.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable one-piece construction:\u003c\/strong\u003e Thick steel from tip to base supports long-lasting use and consistent mowing results.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEfficient, even cuts:\u003c\/strong\u003e Engineered for an even and precise cut on a variety of terrains and grass types, helping to streamline mowing sessions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFit and installation details:\u003c\/strong\u003e Length 17.72 inches, width 1.97 inches, thickness 0.71 inches, center hole diameter 0.88 inches. Verify your mower part number and size before ordering.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSimple packaging:\u003c\/strong\u003e Includes 1 blade per package for straightforward replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat you can expect in real use\u003c\/h3\u003e\n\u003cp\u003eIn everyday yard work, this IDEASURE blade aims to deliver a smoother pull across patchy lawns and denser turf alike. The combination of a long blade length and a narrow width helps maintain stable contact with the ground, while the robust steel construction stands up to frequent use under various weather conditions. While results can vary by mower model, homeowners may notice a more even surface and fewer passes needed to achieve a clean edge.\u003c\/p\u003e\n\n\u003ch3\u003eKey specifications and compatibility notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade length:\u003c\/strong\u003e 17.72 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade width:\u003c\/strong\u003e 1.97 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade thickness:\u003c\/strong\u003e 0.71 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter hole diameter:\u003c\/strong\u003e 0.88 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePack contents:\u003c\/strong\u003e 1 blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to choose and install\u003c\/h3\u003e\n\u003cp\u003eBefore purchasing, please double-check that your mower’s replacement part number, model, and blade size match the specifications listed above. Proper fit helps ensure safe operation and optimal mowing performance. When installing, follow the mower manufacturer’s guidelines and adopt standard safety practices.\u003c\/p\u003e\n\n\u003ch3\u003eBenefits you might experience\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAccurate alignment can support consistent cutting performance over time.\u003c\/li\u003e\n  \u003cli\u003eThick steel construction may contribute to durable service life under regular use.\u003c\/li\u003e\n  \u003cli\u003eEven cuts across varied terrains can reduce the need for excess passes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this IDEASURE 25012 blade compatible with Green-Works 18-inch mowers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits Green-Works 18-inch decks, including models 25012, 2519402, and 33303463.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the blade dimensions and installation notes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Length 17.72 in, width 1.97 in, thickness 0.71 in, center hole 0.88 in; verify part number and size before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43979740119174,"sku":"B0DQ1HZG51","price":29.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-25012-blade-18in-deck.jpg?v=1778672226"},{"product_id":"ideasure-581101101-mulching-blades-for-54-inch-mower-deck-3-pack-compatible-with-husqvarna-gt54cs-gt54ls-yt54ls-poulan-pp24ka54-craftsman-redmax","title":"IDEASURE 581101101 Mulching Blades for 54-inch Mower Deck — 3-Pack, Compatible with Husqvarna GT54CS\/GT54LS\/YT54LS, Poulan PP24KA54, Craftsman, Redmax","description":"\u003ch2\u003ePremium mulching blades engineered for 54-inch mower decks\u003c\/h2\u003e\n\u003cp\u003eUpgrade your mowing routine with the IDEASURE 581101101 blades, designed to replace Part Number 581101101 and fit a wide range of popular models. Forged from thick, single-piece steel, these blades are built to stand up to repeated passes across varied lawns, delivering dependable durability and a consistently reliable mowing experience.\u003c\/p\u003e\n\u003cp\u003eIn daily use, you’ll notice how the blades contribute to a smooth, even cut and finely mulched clippings that distribute more evenly across the turf. The 3-pack format provides ready replacements, helping you stay prepared for maintenance intervals without interruption.\u003c\/p\u003e\n\u003ch2\u003eKey benefits and what to expect\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Husqvarna GT54CS, GT54LS, YT54LS; Poulan PP24KA54; Craftsman; Redmax models\u003c\/li\u003e\n  \u003cli\u003eDesigned for 54-inch mower decks to cover wide swaths efficiently\u003c\/li\u003e\n  \u003cli\u003eHigh-quality thick steel, single-piece construction for long-lasting durability\u003c\/li\u003e\n  \u003cli\u003eEfficient cutting action supports an even, precise finish across different terrains\u003c\/li\u003e\n  \u003cli\u003eThree blades in each pack for convenient, extended maintenance intervals\u003c\/li\u003e\n  \u003cli\u003eBlade dimensions: 18-3\/7 inches long, 2-1\/4 inches wide, 4\/5 inch center hole, 0.157 inch thick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterial, fit, and real-world use\u003c\/h3\u003e\n\u003cp\u003eThe blades are crafted from thick steel in a single-piece design, reducing the risk of joints loosening after impact with roots or debris. Their geometry emphasizes a steady bite into soft and tough grasses alike, promoting an even mulch distribution that can help keep the lawn looking uniform after each pass.\u003c\/p\u003e\n\u003cp\u003eBefore ordering, please verify that the blade match aligns with your mower’s model and deck size. The 3-pack format helps you keep spares on hand for timely replacements, ensuring you can resume mowing with minimal downtime.\u003c\/p\u003e\n\u003cp\u003eIn practical terms, these IDEASURE blades are suited for routine maintenance on professional-looking lawns, weekend projects, or seasonal cleanups where dependable performance matters. The combination of compatibility, build quality, and the included three-pack design offers a balanced option for users seeking replacements that fit a range of popular machines without compromising cutting quality.\u003c\/p\u003e\n\u003cp\u003eNote: Results may vary based on mower condition, blade engagement, and grass type. Always inspect the blades before use and replace any blade showing excessive wear or damage to maintain optimal mowing performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which mowers are compatible with IDEASURE 581101101 mulching blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with Husqvarna GT54CS, GT54LS, YT54LS, Poulan PP24KA54, Craftsman, and Redmax models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What does the 3-pack include and what are the blade dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Includes 3 blades: 18-3\/7 inches long, 2-1\/4 inches wide, 4\/5 inch center hole, 0.157 inch thick.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43979895242886,"sku":"B0D25YDSQX","price":44.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-581101101-mulching-blades-front-view.jpg?v=1778676500"},{"product_id":"ideasure-532419274-mulching-blade-for-30-inch-mower-deck-replaces-419274","title":"IDEASURE 532419274 Mulching Blade for 30-Inch Mower Deck – Replaces 419274","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe IDEASURE 532419274 mulching blade is designed for 30 inch mower decks, offering an even, confident cut across different grasses and terrains. Built to fit a broad range of equipment, it supports a practical mulching approach while simplifying maintenance for regular lawn care.\u003c\/p\u003e\n\u003ch3\u003eVersatility that fits your mower\u003c\/h3\u003e\n\u003cp\u003eThis blade is listed as compatible with Husqvarna, Poulan, AYP, Dixon, Sears, Craftsman, Weed Eater, Roper, and other common brands. It replaces several part numbers, including 532419274 and 419274, helping you identify a straightforward replacement. The center hole is a 5-point star pattern, matching select spindle configurations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces Part Numbers: 532419274, 777419274, 91777419274, 419274\u003c\/li\u003e\n\u003cli\u003eCompatible with a wide range of models and deck codes\u003c\/li\u003e\n\u003cli\u003eIncludes 1 blade per pack with clear dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReal world mowing experience\u003c\/h3\u003e\n\u003cp\u003eIn daily use you may notice steadier balance and a cleaner appearance after each pass. The mulching design can reduce visible clippings and help leaves and grass shorten into finer particulates on the lawn, supporting a natural nutrient cycle. The blade is built to maintain momentum on varied terrains, from flat stretches to gentle slopes, potentially helping you finish the job with less effort.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEfficient cutting on 30 inch decks across grass types\u003c\/li\u003e\n\u003cli\u003eBalanced weight and sharp edge for smooth operation\u003c\/li\u003e\n\u003cli\u003eDurable construction designed for regular replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey specs and installation notes\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, double check that the mulching blade matches your mower in both deck size and spindle interface. The package includes a single 419274 blade with the following specs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 29-3\/4 inches\u003c\/li\u003e\n\u003cli\u003eWidth: 2-1\/4 inches\u003c\/li\u003e\n\u003cli\u003eThickness: 0.157 inches\u003c\/li\u003e\n\u003cli\u003eCenter hole: 5-point star\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote that this replacement is designed as a versatile option for regular lawn maintenance; outcomes depend on mower condition and grass type.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mower decks is the IDEASURE 532419274 Mulching Blade compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits 30-inch decks across brands like Husqvarna, Poulan, AYP, Dixon, Sears, Craftsman, Weed Eater, and Roper.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What specs should I check before ordering?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check length 29-3\/4 in, width 2-1\/4 in, thickness 0.157 in, and center hole 5-point star.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43979896127622,"sku":"B0D22SLMN1","price":38.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-mulching-blade-30inch-deck.jpg?v=1778676613"},{"product_id":"ideasure-038-4221-00-42-inch-lawn-mower-blades-high-lift-notched-replacement-3-pack-bad-boy-dixie-chopper","title":"IDEASURE 038-4221-00 42-inch Lawn Mower Blades – High Lift Notched Replacement, 3 Pack (Bad Boy \/ Dixie Chopper)","description":"\u003ch2\u003ePremium replacement blades for 42-inch mower decks\u003c\/h2\u003e\n\u003cp\u003eThe IDEASURE 038-4221-00 blades are engineered as a robust, high-lift, notched replacement designed to fit 42-inch deck mowers. This 3-pack gives you a ready set of blades to refresh your cutting performance without overhauling your routine.\u003c\/p\u003e\n\u003cp\u003eBuilt for durability and consistent mowing, these blades are more than a quick swap. They’re designed to deliver uniform contact with the turf, helping you achieve an even look across your lawn while you work through varying grass types and seasonal growth cycles.\u003c\/p\u003e\n\u003ch3\u003eKey benefits you may notice\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable one-piece thick steel construction for lasting service life\u003c\/li\u003e\n  \u003cli\u003eHigh-lift and notched geometry to improve airflow and lift for a cleaner pass\u003c\/li\u003e\n  \u003cli\u003eReliable performance across different terrains and grass types\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment, specs, and how to use\u003c\/h3\u003e\n\u003cp\u003eThese blades reference Bad Boy part numbers (038-4221-00, 038-4226-00, 038422100, 038422600) and related models, along with Gravely 02961600 and several Dixie Chopper variants (30227-42, 63227-H, 63227-N). The blades are compatible with many 42-inch decks, including models in the MZ family and 2010-2012 CZT line; please double-check fitment in your product description before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 3 blades per package\u003c\/li\u003e\n  \u003cli\u003eBlade length: 14-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003eBlade width: 2-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 5\/8 inch\u003c\/li\u003e\n  \u003cli\u003eThickness: 0.197 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn real-world use, you may notice steadier cutting performance and smoother operation when the blades are fresh and properly installed. Maintain safety by disconnecting power and following your mower’s manual during swaps, and consult the fitment guide if you’re unsure about compatibility.\u003c\/p\u003e\n\u003cp\u003eOverall, IDEASURE blades offer a practical, long-lasting replacement option that aligns with routine lawn care. They’re designed to support consistent mowing results without promising guarantees, so you can choose based on your needs and the typical conditions you face on your property.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models are compatible with the IDEASURE 038-4221-00 blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with MZ, MZ Magnum, 2010–2012 CZT and several other models; verify fitment in the description.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the package and blade dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Includes 3 blades. Each blade is 14-1\/2 inches long, 2-1\/2 inches wide, 5\/8 inch center hole, 0.197 inch thickness.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43979896356998,"sku":"B0D22QW8W6","price":41.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-038-4221-00-blade-42-inch-deck.jpg?v=1778676607"},{"product_id":"ideasure-942-0641-high-lift-blade-21-inch-deck-2-pack-cub-cadet-troy-bilt-compatible","title":"IDEASURE 942-0641 High Lift Blade – 21-inch Deck, 2 Pack, Cub Cadet \u0026 Troy-Bilt Compatible","description":"\u003cdiv class=\"seo-description\"\u003e\n  \u003ch2\u003eOverview\u003c\/h2\u003e\n  \u003cp\u003eMeet the IDEASURE 942-0641 High Lift Blade, a two-blade set designed for 21-inch mower decks. Built to deliver strong lift and an even, level cut, these replacements help grass stand upright for a uniform appearance across lawns of varying textures. A note on use: avoid sandy or dusty environments to protect the blade’s edge and performance.\u003c\/p\u003e\n\n  \u003ch2\u003eWhat it fits\u003c\/h2\u003e\n  \u003cp\u003eThe 942-0641 blade is compatible with Cub Cadet and Troy-Bilt mowers that use a 21-inch deck, including popular Tuff-Cut lines such as 220\/230 TB-series and TB-series models. This is a two-pack, giving you ready replacements for maintenance and timing.\u003c\/p\u003e\n\n  \u003ch2\u003eKey benefits and performance\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eHigh lift design creates upward suction to help lift grass for a more even cut.\u003c\/li\u003e\n    \u003cli\u003eEfficient cutting across a range of grasses and terrains for a smoother mowing experience.\u003c\/li\u003e\n    \u003cli\u003ePrecise dimensions suit standard 21-inch decks (length 21\", width 2-1\/4\", thickness 0.126\").\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eTwo blades included in the package, offering convenient maintenance and balanced wear when replacing in pairs.\u003c\/li\u003e\n    \u003cli\u003eBefore ordering, verify the blade part number matches your mower to ensure proper fit.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eUsage and care tips\u003c\/h2\u003e\n  \u003cp\u003eInstall with the correct orientation and align mounting holes to the deck’s pattern for secure operation. Regularly inspect the edge and mounting holes for wear and replace as needed to maintain mowing efficiency.\u003c\/p\u003e\n\n  \u003ch2\u003eMaintenance and care\u003c\/h2\u003e\n  \u003cp\u003eKeep blades sharp and free of debris after use. When replacing, handle blades safely and dispose of worn blades responsibly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mower models and deck size does the IDEASURE 942-0641 High Lift Blade fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for 21-inch decks on Cub Cadet and Troy-Bilt mowers, including Tuff-Cut 220\/230 TB-series models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this sold as a two-pack and what’s included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the package includes two high lift blades for 21-inch decks, ready for quick replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43979917852806,"sku":"B0GDCQS9W5","price":35.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-942-0641-high-lift-blade-21-deck-top-view.jpg?v=1778678172"},{"product_id":"ideasure-04771200-high-lift-blades-3-pack-for-52-inch-decks-compatible-with-ikon-x-xl-xd-edge-gravely-zt-x-and-zt-xl-series","title":"IDEASURE 04771200 High Lift Blades – 3 Pack for 52-inch Decks, Compatible with Ikon X\/XL\/XD, Edge, Gravely ZT X and ZT XL Series","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eUpgrade your lawn care with IDEASURE 04771200 high lift blades, a 3-pack designed for 52-inch mower decks. These replacement blades align with popular models such as Ikon X\/XL\/XD, Edge, and Gravely ZT X\/ZT XL series, offering durability and steady cutting performance for everyday mowing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDurability and build\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOne-piece thick steel construction for lasting strength and consistent performance.\u003c\/li\u003e\n\u003cli\u003eDesigned to resist bending and wear during frequent mowing across varied lawns.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCutting efficiency and compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh lift geometry helps grass lift for an even, thorough cut on a range of terrains.\u003c\/li\u003e\n\u003cli\u003eSpecifically sized for 52-inch decks to support balanced, efficient mowing sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn real-world use, you may notice smoother engagement with the mower’s deck and steadier cutting results across different grass types, thanks to precise alignment and materials designed for durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePackage includes three 04771200 blades, ready for installation on compatible units.\u003c\/li\u003e\n\u003cli\u003eEach blade measures 18 inches in length, with a width of 2-1\/4 inches and a thickness of 0.157 inches; center mounting hole is 5\/8 inch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhether you maintain a residential yard or operate a larger property, these IDEASURE blades are positioned as solid replacements that aim to keep mowing sessions efficient and predictable without overpromising results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models are compatible with IDEASURE 04771200 blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The blades fit many 52-inch deck mowers, including Ikon X\/XL\/XD, Edge, and Gravely ZT X\/ZT XL.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the IDEASURE 3-pack?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Three replacement high lift blades sized for 52-inch decks are included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43979974049926,"sku":"B0F1F9BVHP","price":44.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-high-lift-blade-04771200-52inch-deck.jpg?v=1778680542"},{"product_id":"ideasure-gx20249-high-lift-blades-for-42-inch-deck-2-pack-compatible-with-john-deere-l100-l105-l110-l111-l118","title":"IDEASURE GX20249 High Lift Blades for 42-Inch Deck (2 Pack) — Compatible with John Deere L100\/L105\/L110\/L111\/L118","description":"\u003ch2\u003eUpgrade Your Mowing Experience with IDEASURE GX20249 High Lift Blades\u003c\/h2\u003e\n\u003cp\u003eDesigned for 42-inch mower decks, the IDEASURE GX20249 blades bring a blend of durability and precision to your lawn care routine. Each blade is forged from a single piece of high-quality thick steel, delivering steadfast edge retention and consistent performance across sessions. This 2-pack ensures you have ready replacements on hand, helping you minimize downtime and keep your mower running smoothly through the season.\u003c\/p\u003e\n\u003cp\u003eImagine the satisfaction of a clean, even cut that crews through grass with minimal effort. The high lift geometry optimizes airflow and clippings management, supporting effective bagging and a neat, uniform finish. While results can vary with grass type and terrain, these blades are engineered to provide reliable cutting on a variety of lawns, from smooth turf to mildly uneven ground.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable, one-piece steel construction for longer service life and steady performance.\u003c\/li\u003e\n  \u003cli\u003eHigh lift design for improved clipping discharge and consistent mowing results.\u003c\/li\u003e\n  \u003cli\u003ePrecisely sized for 42-inch mower decks, offering a balanced, even cut across different terrains.\u003c\/li\u003e\n  \u003cli\u003eTwo blades included for easy, ready-to-use replacements when needed.\u003c\/li\u003e\n  \u003cli\u003eIncludes detailed measurements to help confirm fit before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 42-inch deck models and is compatible with John Deere L100 series machines (L100, L105, L110, L111, L118).\u003c\/li\u003e\n  \u003cli\u003eListed compatibility also covers select Sa-bre, Sa-bo, and S-cotts variations, as noted in the product specs.\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers GX20249, GX20433, GY20567, and related identifiers for a seamless swap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 21-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003eWidth: 2-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003eCenter hole diameter: 11\/16 inch\u003c\/li\u003e\n  \u003cli\u003eOutside hole diameter: 7\/16 inch\u003c\/li\u003e\n  \u003cli\u003eThickness: 0.157 inches\u003c\/li\u003e\n  \u003cli\u003ePackage: 2 blades\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePractical Use and Care\u003c\/h3\u003e\n\u003cp\u003eFor best results, verify compatibility with your mower model and mounting configuration before installation. When replacing, follow standard safety precautions, ensure the blades are securely fastened, and check for nicks or burrs after use. Regular blades replacement can contribute to more predictable mowing performance and a cleaner cut profile over time.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What decks and models are compatible with IDEASURE GX20249 blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit 42-inch decks and John Deere L100 series (L100, L105, L110, L111, L118), plus listed Sa-bre and S-cotts models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What exactly is included and what are the blade dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes 2 high lift blades. Each blade measures 21-3\/8 inches long, 2-1\/2 inches wide, center hole 11\/16 inch, outer hole 7\/16 inch, thickness 0.157 inches.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43980490178694,"sku":"B0DRPS4B7Y","price":37.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-gx20249-high-lift-blade-42-inch-deck.jpg?v=1778688046"},{"product_id":"ideasure-942-04290-mulching-blade-for-46-inch-deck-2-pack-cub-cadet-craftsman-compatible","title":"IDEASURE 942-04290 Mulching Blade for 46-Inch Deck – 2 Pack, Cub Cadet\/Craftsman Compatible","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eUpgrade your 46‑inch mower deck with the IDEASURE 942-04290 mulching blades. Supplied as a convenient 2‑pack, these blades are designed to fit a broad spectrum of popular brands, including Cub Cadet, Craftsman, and Troy‑Bilt models. With a balanced profile and precise edging, they aim to deliver cleaner mulch and a crisper overall cut, helping you maintain a tidy lawn with less downtime between mowings.\u003c\/p\u003e\n\u003cp\u003eThe blade geometry is engineered to balance cutting efficiency with consistent mulching performance. When installed, you may notice steadier operation and a more predictable clipping flow across varied terrains and grass types. While outcomes depend on mowing conditions and maintenance, these blades are built to support regular replacement and dependable performance.\u003c\/p\u003e\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2 × 942-04290 mulching blades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEven, efficient cutting across different grasses and conditions\u003c\/li\u003e\n  \u003cli\u003eBroad compatibility with many 46-inch deck systems\u003c\/li\u003e\n  \u003cli\u003eDurable construction designed for routine replacement\u003c\/li\u003e\n  \u003cli\u003eSimple installation using standard 6‑point star center and mounting holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 23-1\/7 inches\u003c\/li\u003e\n  \u003cli\u003eWidth: 2-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003eThickness: 0.157 inches\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 1 inch (6-point star)\u003c\/li\u003e\n  \u003cli\u003eOutside hole: 5\/16 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility \u0026amp; fit notes\u003c\/h2\u003e\n\u003cp\u003eDesigned to fit a wide range of 46‑inch decks and an extensive list of models. For best results, compare your mower’s OEM part numbers and ensure a match with the listed compatibility in the product details before purchasing.\u003c\/p\u003e\n\u003ch2\u003eUsage tips \u0026amp; maintenance\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect blades for nicks or bends before installation and replace if damaged.\u003c\/li\u003e\n  \u003cli\u003eFollow safe blade replacement practices and disconnect power source before handling.\u003c\/li\u003e\n  \u003cli\u003eKeep blades sharp and balanced to maintain even mulching and reduce vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: While IDEASURE blades are designed to enhance cutting performance and mulch quality, actual results vary with grass type, mowing conditions, and deck maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the IDEASURE 942-04290 blade compatible with my 46-inch mower deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The blades fit many 46-inch decks, including Cub Cadet, Craftsman, and Troy-Bilt; please verify your mower model and OEM numbers before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What should I expect when using these mulching blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Possible benefits include more even cuts and improved debris management, though results vary by grass type, mower condition, and mowing technique.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43980490276998,"sku":"B0DRPT37YD","price":41.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-942-04290-mulching-blade-46-inch-deck-closeup.jpg?v=1778688048"},{"product_id":"ideasure-173920-high-lift-blades-for-48-inch-deck-3-pack-532180054-compatible-with-husqvarna-craftsman","title":"IDEASURE 173920 High Lift Blades for 48-inch Deck — 3 Pack, 532180054 Compatible with Husqvarna \u0026 Craftsman","description":"\u003ch2\u003eIDEASURE 173920 High Lift Blades for 48-inch Deck — 3 Pack\u003c\/h2\u003e\n\u003cp\u003eUpgrade your mowing kit with IDEASURE 173920 High Lift Blades, engineered for 48-inch mower decks. These blades combine robust steel with precision geometry to deliver a clean, even cut across a range of grasses and terrain. While results vary by mower and conditions, users may notice smoother passes, more uniform clippings, and fewer re-cuts as you work through the yard.\u003c\/p\u003e\n\u003cp\u003eCrafted as a single, thick steel piece, the blades are built for durability and long service life. The solid construction helps maintain balance and minimizes vibration, which can translate into steadier operation and a more comfortable mowing experience over time.\u003c\/p\u003e\n\n\u003ch3\u003ePremium construction\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece thick steel design for enhanced durability and longevity\u003c\/li\u003e\n  \u003cli\u003ePrecisely formed edge geometry to sustain balance during cutting\u003c\/li\u003e\n  \u003cli\u003eRigid construction geared toward dependable performance across varied conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThree blades per package\u003c\/li\u003e\n  \u003cli\u003eLength: 16-3\/4 inches; Width: 2-1\/2 inches; Thickness: 0.197 inches\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 5-point star pattern for secure mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment and compatibility\u003c\/h3\u003e\n\u003cp\u003eThese blades are designed to fit a broad range of brands and models that use a 48-inch deck, including Husqvarna and Poulan variants as well as Craftsman lawn tractors. The packaging lists multiple compatible part numbers to help you verify fitment. Always double-check your mower’s deck size and the listed part numbers prior to purchasing.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing the right blades\u003c\/h3\u003e\n\u003cp\u003eWhen selecting blades, consider deck size, mower model, and the center hole pattern. If your mower uses a 48-inch deck and matches the listed part numbers, IDEASURE blades offer a viable replacement option that aims to preserve cutting performance while simplifying maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models are these IDEASURE blades compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many 48-inch deck models, including Husqvarna YTH24V48 and Poulan PP22V48; always confirm your mower's deck size and compatible part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the package and what are the blade specs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each blade is 16-3\/4 inches long, 2-1\/2 inches wide, 0.197 inches thick, with a 5-point star center hole; package includes three blades.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43980493193350,"sku":"B0DRKYCCKT","price":38.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-high-lift-blades-48-deck-front-view.jpg?v=1778688218"},{"product_id":"ideasure-m145476-high-lift-blades-3-pack-for-48-inch-decks-compatible-with-john-deere-x300-x320-x350-more","title":"IDEASURE M145476 High Lift Blades – 3-Pack for 48-Inch Decks | Compatible with John Deere X300 X320 X350 \u0026 More","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eUpgrade your 48-inch mower deck with IDEASURE M145476 High Lift Blades. This three-pack replaces a range of part numbers and is designed to fit a broad array of John Deere models across LX, GT, GX series and beyond. The blades are crafted to deliver an even, consistent cut while lifting grass for a neater finish, helping you tackle front-yard and back-lawn tasks with ease.\u003c\/p\u003e\n\u003cp\u003eBuilt with practical durability in mind, these blades use a one-piece thick steel construction that aims to extend service life and maintain steady mowing performance through varying conditions. The result is a dependable mowing experience that concentrates on precision and reliability rather than shortcuts.\u003c\/p\u003e\n\n\u003ch3\u003eKey benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable, single-piece thick steel construction for longer wear life and consistent performance\u003c\/li\u003e\n  \u003cli\u003eHigh lift design supports better grass pickup and an even cut across terrains\u003c\/li\u003e\n  \u003cli\u003eMultipack convenience for quick replacements and less downtime between sessions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFit, compatibility, and what’s included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 48\" mower decks and compatible with a wide range of John Deere LX, GT, GX series models and classic X300, X320, X350 variants\u003c\/li\u003e\n  \u003cli\u003eReplaces multiple part numbers (M127500, M145476, M127673, AM146715, AM141907, M141794, AM148663, UC22009, 330-369, 50-4442)\u003c\/li\u003e\n  \u003cli\u003ePackage includes 3 blades; dimensions are 17\" long, 2-1\/2\" wide, 0.197\" thick with a 13\/16\" center hole\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications at a glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 17 inches\u003c\/li\u003e\n  \u003cli\u003eWidth: 2-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003eThickness: 0.197 inches\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 13\/16 inches\u003c\/li\u003e\n  \u003cli\u003ePackage: 3 blades\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eReal-world use and care\u003c\/h3\u003e\n\u003cp\u003eIn everyday mowing, these high lift blades can contribute to a cleaner, more even appearance on lawns with mixed grasses or uneven terrain. The three-pack design reduces downtime between replacements, helping you maintain steady mowing momentum. For best results, verify fitment against your mower model and blade hole size before purchase and follow standard blade maintenance practices to keep performance consistent.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which mower models are compatible with IDEASURE M145476 blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits many John Deere 48\" deck models, including LX, GT, GX series, X300, X320, X350, and more; verify model and blade hole size before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the key blade specs for IDEASURE M145476?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Length 17 inches, width 2.5 inches, thickness 0.197 inches, center hole 13\/16 inch; sold as a 3-pack.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43980494667910,"sku":"B0DRKWH8RG","price":45.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-m145476-high-lift-blade-48-deck.jpg?v=1778688248"},{"product_id":"ideasure-1737816-lawn-mower-blades-for-42-inch-deck-2-pack-compatible-with-snapper-simplicity-murray","title":"IDEASURE 1737816 Lawn Mower Blades for 42-Inch Deck – 2 Pack, Compatible with Snapper, Simplicity, Murray","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eIDEASURE 1737816 lawn mower blades are engineered for 42-inch deck riding mowers and come as a durable 2-pack. They replace multiple part numbers, including 1737816, 1737816BMYP, 1737816BZ, 1737816SM, and 1737816YP, making them a versatile option when updating compatible brands. This approach helps simplify replacements and keeps your mower performing with a consistent cutting edge.\u003c\/p\u003e\n\n\u003ch3\u003eWhy these blades stand out\u003c\/h3\u003e\n\u003cp\u003eEach blade is forged from a single piece of thick, high-quality steel. The one-piece construction adds rigidity and long-term resilience, supporting reliable mowing over time. The blades are shaped to maintain balance and reduce vibrations, contributing to smoother operation across varied terrains and grass types. While results can vary by conditions, many users notice a steadier bite and an even appearance after a full pass.\u003c\/p\u003e\n\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 21 inches; Width: 2-1\/4 inches; Thickness: 0.156 inches\u003c\/li\u003e\n  \u003cli\u003eCenter hole size as listed in the product details\u003c\/li\u003e\n  \u003cli\u003ePackage includes 2 blades\u003c\/li\u003e\n  \u003cli\u003eDesigned for 42-inch mower decks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility and fit\u003c\/h3\u003e\n\u003cp\u003eThe blades are designed to fit a wide range of Snapper, Simplicity, and Murray riding mowers. Compatibility includes Snapper NXT models and SPX 2042, NXT 19542, NXT 2242, RZT 21420; Simplicity MF 2520, MF 2521, Regent, ZT 1842, ZT 2042, ZT 2142, ZT 21420, ZT 2321; and Murray ZTS 7000 series, among others. Always compare your current blade’s specs to these details before ordering to ensure a proper match for your mower.\u003c\/p\u003e\n\n\u003ch3\u003eReal-world use scenarios\u003c\/h3\u003e\n\u003cp\u003eHomeowners with uneven lawns and mixed grass types may experience more consistent clipping and balanced cutting when using this two-blade set. The durable steel construction is designed to withstand regular mowing cycles, and the two-pack format means you can replace blades in pairs to maintain balance and mowing efficiency.\u003c\/p\u003e\n\n\u003ch3\u003eCare and installation tips\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall blades with correct orientation and align the center hole with the spindle.\u003c\/li\u003e\n  \u003cli\u003eInspect for nicks or bending regularly and replace in pairs to preserve balance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eNote: Before ordering, confirm that your mower deck, spindle, and blade center hole match these specifications to ensure a proper fit and safe operation. This product is intended to refresh cutting performance and consistency in suitable conditions, rather than guarantee specific results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which mowers are compatible with IDEASURE 1737816 blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: These blades fit many 42-inch deck riding mowers from Snapper, Simplicity, and Murray families as listed in the product specs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes 2 IDEASURE 1737816 blades for a 42-inch deck.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43980500205702,"sku":"B0FDKP6B5J","price":42.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-1737816-blade-front-view-42deck.jpg?v=1778688536"},{"product_id":"ideasure-72511-ve1-020-72531-ve2-020-mower-blades-kit-for-21-deck-compatible-with-honda-hrb-hrm-hrs-hrt-series","title":"IDEASURE 72511-VE1-020 \u0026 72531-VE2-020 Mower Blades Kit for 21\" Deck — Compatible with Honda HRB\/HRM\/HRS\/HRT Series","description":"\u003ch2\u003ePremium IDEASURE Blades Kit for 21\" Mower Decks\u003c\/h2\u003e\n\u003cp\u003eUpgrade your mowing experience with the IDEASURE 72511-VE1-020 and 72531-VE2-020 blades. Crafted from thick, single-piece steel, these blades are designed to deliver dependable performance across a variety of lawns. The kit aims to combine durability with precise, even cutting, helping you achieve a well-manicured look with less effort.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUpper mulching blade: 72531-VE2-020 — Length 20-7\/8\", Width 2-5\/8\"\u003c\/li\u003e\n\u003cli\u003eLower high-lift blade: 72511-VE1-020 — Length 20-7\/8\", Width 2-1\/4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Benefits and Use Cases\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEven, precise cuts across varied terrains and grass types, promoting a neat lawn appearance\u003c\/li\u003e\n\u003cli\u003eDurable, one-piece thick steel construction for extended service life\u003c\/li\u003e\n\u003cli\u003eBroad compatibility with many Honda 21\" decks, including HRB, HRM, HRR, HRS, and HRT series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy IDEASURE\u003c\/h3\u003e\n\u003cp\u003eThese blades are designed to optimize airflow and reduce routine blade wear, offering a reliable option for regular mowing routines. They emphasize value and consistent performance without guaranteeing specific results.\u003c\/p\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cp\u003eBefore purchasing, verify fitment against your mower model. Follow standard blade installation steps and keep blades sharp and balanced for best performance. Regular checks help maintain mowing efficiency and blade life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these blades compatible with my Honda mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit select 21\" Honda decks in the HRB\/HRM\/HRS\/HRT families; check the model list in the description for exact compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes one 72531-VE2-020 upper mulching blade and one 72511-VE1-020 lower high-lift blade.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43980507316358,"sku":"B0DR8SJGSH","price":37.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-upper-mulching-blade-72531-ve2-020.jpg?v=1778688822"},{"product_id":"ideasure-21-inch-mulching-blade-2-pack-for-husqvarna-craftsman-ayp-poulan-21-inch-decks","title":"IDEASURE 21-Inch Mulching Blade – 2 Pack for Husqvarna, Craftsman, AYP \u0026 Poulan 21-Inch Decks","description":"\u003cdiv\u003e\n  \u003ch2\u003eOverview\u003c\/h2\u003e\n  \u003cp\u003eUpgrade your mower with the IDEASURE 21-inch mulching blade set. Designed to replace worn blades on compatible 21-inch decks, this 2-pack helps maintain consistent cutting performance across a variety of grasses. Expect smoother starts, even clippings, and a cleaner finish without frequent blade swaps.\u003c\/p\u003e\n  \u003ch3\u003eWhy choose IDEASURE for your mower\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDurable construction crafted to handle regular mowing tasks across different terrains\u003c\/li\u003e\n    \u003cli\u003eSharp, balanced edges that promote clean, even clippings and reduced buildup\u003c\/li\u003e\n    \u003cli\u003eTwo blades per package for extended maintenance intervals and quick replacements\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eCompatibility and Fit\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eReplaces a broad range of part numbers including 165833, 175064, 176135, 189028, 406712, 532406712, 532175064, and 331737B\u003c\/li\u003e\n    \u003cli\u003eWidely compatible with Husqvarna, Craftsman, AYP, and Poulan-Lan 21-inch deck models\u003c\/li\u003e\n    \u003cli\u003eFor additional models, refer to the product description and compatibility notes\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eSpecifications \u0026amp; What's Included\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003ePackage includes 2 blades, model 331737B\u003c\/li\u003e\n    \u003cli\u003eBlade length: 21 inches; width: 2-1\/4 inches; thickness: 0.138 inches\u003c\/li\u003e\n    \u003cli\u003eCenter hole: 5\/8 inch; outside holes: 3\/8 inch\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eBefore ordering, compare your mower deck and mounting hole configuration to ensure a proper match. This set aims to deliver reliable performance with a straightforward swap for compatible 21-inch decks.\u003c\/p\u003e\n  \u003ch3\u003eUse Scenarios\u003c\/h3\u003e\n  \u003cp\u003eIdeal for mowing lawns with mixed grass types, where even clippings and efficient mulching support a tidy yard appearance. Consider this two-blade pack when routine maintenance or reduced downtime is a priority.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the IDEASURE 21-inch mulching blade compatible with my mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This blade fits many 21-inch decks from Husqvarna, Craftsman, AYP, and Poulan-Lan. Check the listed part numbers to confirm fit for your model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the package and what are the key specs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Includes two IDEASURE 21-inch mulching blades (model 331737B). Dimensions: 21 inches long, 2-1\/4 inches wide, 0.138 inches thick, center hole 5\/8 inch, outside holes 3\/8 inch.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43980507971718,"sku":"B0DR8Q3LK1","price":38.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-lawn-mower-mulching-blade-21-deck.jpg?v=1778688900"},{"product_id":"ideasure-942-0677-gator-mulching-blades-for-54-inch-deck-3-pack","title":"IDEASURE 942-0677 Gator Mulching Blades for 54-Inch Deck – 3 Pack","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eMeet IDEASURE 942-0677 Gator Mulching Blades, a practical 3-pack designed for 54-inch mower decks. They replace a range of part numbers and aim to restore mowing efficiency with a robust, durable build. While every lawn has its own rhythm, these blades are engineered to deliver steady performance with a neat finish across a variety of conditions.\u003c\/p\u003e\n\u003ch2\u003eDesign and engineering\u003c\/h2\u003e\n\u003cp\u003eCrafted from a single piece of thick steel, the blades resist bending and wear under regular mowing. The geometry supports an even cut and helps the mower handle different grass types with reduced vibration. The mulching-oriented profile is intended to recycle clippings back into the lawn, minimizing cleanup on typical suburban yards.\u003c\/p\u003e\n\u003ch3\u003eKey benefits at a glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable one-piece construction for longer service life\u003c\/li\u003e\n  \u003cli\u003e54-inch deck compatibility with popular brands (Cub Cadet, MTD, Toro, Craftsman, and more)\u003c\/li\u003e\n  \u003cli\u003eEven cutting across varied terrains for a uniform appearance\u003c\/li\u003e\n  \u003cli\u003eThree blades per pack deliver quick replacement and minimal downtime\u003c\/li\u003e\n  \u003cli\u003eMulching-oriented design to recycle clippings and reduce cleanup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 18-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003eWidth: 3 inches\u003c\/li\u003e\n  \u003cli\u003eThickness: 0.157 inches\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 6-point star\u003c\/li\u003e\n  \u003cli\u003eOutside holes: 5\/16 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance and field notes\u003c\/h3\u003e\n\u003cp\u003eIn practice, these blades perform across smooth and uneven surfaces, different grass densities, and damp mornings. The 3-pack layout supports quick blade swaps after wear, helping keep mowing downtime to a minimum.\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the package\u003c\/h3\u003e\n\u003cp\u003eIncludes 3 × 942-0677 Gator Mulching Blades with precise dimensions and attachment features to suit a broad range of 54-inch decks.\u003c\/p\u003e\n\u003ch3\u003eInstallation tips and compatibility\u003c\/h3\u003e\n\u003cp\u003eBefore purchasing, confirm your mower uses a 54-inch deck and that your model falls within the listed compatibility range (Cub Cadet, MTD, Toro, Craftsman, and similar lines). Proper installation promotes balance and a smooth mowing rhythm.\u003c\/p\u003e\n\u003ch3\u003eSafety and maintenance\u003c\/h3\u003e\n\u003cp\u003eHandle blades with care, store safely, and regularly inspect mounting hardware to maintain performance and safety during mowing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which mower models are compatible with IDEASURE 942-0677 blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: These blades fit many 54-inch decks from Cub Cadet, MTD, Toro, and Craftsman; verify model numbers for a precise match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the main benefits of using IDEASURE 942-0677 blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Durable steel, an even cut, and mulching-friendly performance across varied terrains are potential benefits.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43980508201094,"sku":"B0DR8PR8T9","price":44.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-942-0677-gator-mulching-blades-54-deck.jpg?v=1778688898"},{"product_id":"ideasure-gx21784-high-lift-blades-for-48-inch-deck-3-pack-compatible-with-john-deere-d140-d160-z245-z355e","title":"IDEASURE GX21784 High Lift Blades for 48-Inch Deck | 3 Pack Compatible with John Deere D140-D160, Z245-Z355E","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eUpgrade your mower’s performance with IDEASURE GX21784 High Lift Blades designed for 48-inch decks. This three-pack replacement set consolidates key part numbers into a single, durable statement of reliability. Expect a balanced, smooth mowing experience that feels like a steady, confident glide across your lawn.\u003c\/p\u003e\n\u003cp\u003eEngineered for longevity, these blades are crafted from thick, one-piece steel that resists wear and maintains a consistent cutting edge. While results vary with grass type and mowing conditions, many users notice steadier mowing and fewer interruptions when swapping to a fresh blade set.\u003c\/p\u003e\n\n\u003ch3\u003eFit and Compatibility\u003c\/h3\u003e\n\u003cp\u003eThese blades connect with a wide range of John Deere mowers, covering popular deck configurations and model lines. They’re listed to replace several part numbers and are designed to slot into mowers that share the same 48-inch deck footprint, delivering a straightforward, bolt-on replacement process.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Cutting Quality\u003c\/h3\u003e\n\u003cp\u003eExpect an even, precise cut across different terrains and grass types. The high lift design helps lift grass blades for a cleaner pass, which can contribute to a more uniform lawn appearance over time. While not a guarantee of results, the profile aims to balance efficiency with dependable mowing action.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s in the Pack and Technical Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes 3 blades\u003c\/li\u003e\n  \u003cli\u003eLength: 17-1\/8 inches\u003c\/li\u003e\n  \u003cli\u003eWidth: 2-3\/4 inches\u003c\/li\u003e\n  \u003cli\u003eThickness: 0.157 inches\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 7 Point Star\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, please verify that the blade matches your mower model to ensure proper fit. The replacement parts covered include GY20852, GX21784, GX21785, AM141035, and AM137757, among others. If your mower uses a 48-inch deck, this set offers a ready-to-install option that aligns with the listed specifications.\u003c\/p\u003e\n\n\u003ch3\u003ePractical Use Cases and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHome lawn maintenance where quick, reliable blade swaps reduce downtime before weekend mowing sessions.\u003c\/li\u003e\n  \u003cli\u003eGardens with mixed grasses or uneven terrain where a consistent cut helps improve overall lawn consistency.\u003c\/li\u003e\n  \u003cli\u003eSeasonal blade replacements to maintain mowing efficiency without frequent adjustments or replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese IDEASURE blades present a practical option for those seeking a balance of durability, compatibility, and dependable cutting performance. Benefits are presented as possibilities based on user experience and mower condition, not guaranteed results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which mower models are compatible with IDEASURE GX21784 blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for many John Deere 48-inch decks, including D140–D160, Z245–Z355E, and select LA\/X\/S series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included in the package and blade dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes three blades; dimensions are 17-1\/8 inches long, 2-3\/4 inches wide, 0.157 inches thick with a 7-point star center.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43980516950150,"sku":"B0DQX1RY6Q","price":42.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-gx21784-high-lift-blades-48-inch-deck.jpg?v=1778689385"},{"product_id":"ideasure-1-5in-x-59in-pool-hoses-for-above-ground-pools-3-pack-with-6-clamps","title":"IDEASURE 1.5in x 59in Pool Hoses for Above Ground Pools — 3 Pack with 6 Clamps","description":"\u003cdiv\u003e\n  \u003ch2\u003eOverview\u003c\/h2\u003e\n  \u003cp\u003eIDEASURE presents a practical hose kit designed for above ground pools. Each hose measures 1.5 inches in inner diameter and 59 inches in length, offering a balanced reach while remaining compatible with common pool components. The translucent frosted tubing lets you observe water flow, helping you quickly identify kinks or blockages before they impact performance. This visibility is especially helpful when setting up a new pool or performing routine maintenance, giving you a clearer sense of how water moves through the system.\u003c\/p\u003e\n  \u003cp\u003eThe kit is built for durability and ease of use. The hoses use PE plastic with a spiral wound structure, delivering a lightweight, flexible profile that helps you route hoses around skimmers, walls, and equipment without bulk. A set of six stainless steel clamps complements the three hoses, designed to secure ends firmly and minimize leaks during pump operation.\u003c\/p\u003e\n  \u003ch3\u003eMaterials and Build\u003c\/h3\u003e\n  \u003cp\u003eThe translucent tube design not only looks clean but also provides ongoing visibility into flow, helping you spot potential tangles or restrictions. The combination of durable PE hoses and corrosion-resistant stainless clamps is aimed at reliable, long-term outdoor use, even when exposed to sun and weather across pool seasons.\u003c\/p\u003e\n  \u003ch3\u003eCompatibility and Fit\u003c\/h3\u003e\n  \u003cp\u003eThese hoses are designed to work with a wide range of above-ground pool systems, including popular brands like Intex, Coleman, and Summer Waves. They fit standard 1.5 inch diameter connectors used for surface skimmers, pool pumps, and filters, making them a versatile replacement option for many setups.\u003c\/p\u003e\n  \u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e3 hoses\u003c\/li\u003e\n    \u003cli\u003e6 stainless steel clamps\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eUsage Scenarios\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eReplace worn or cracked hoses during seasonal maintenance.\u003c\/li\u003e\n    \u003cli\u003eConnect surface skimmers to pumps and filters for streamlined flow.\u003c\/li\u003e\n    \u003cli\u003eExtend reach between pool equipment in larger above-ground configurations.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eCare and Maintenance\u003c\/h3\u003e\n  \u003cp\u003eInspect hoses for wear, keep clamps snug, and avoid sharp bends to prolong life. Store away from direct sun when not in use to reduce material fatigue.\u003c\/p\u003e\n  \u003cp\u003eNote that exact performance may vary with your pool model and components. Verify connector sizes to ensure a proper fit for your setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these hoses compatible with common above-ground pool brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They fit 1.5\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Three hoses and six stainless steel clamps are included for secure, leak-free connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43980993921158,"sku":"B0C287JL7R","price":37.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-pool-hose-1-5inch-59inch-transparent-hose.jpg?v=1778706429"},{"product_id":"ideasure-138971-gator-mulching-blades-for-42-inch-deck-2-pack-compatible-with-craftsman-husqvarna-poulan-lawn-tractors","title":"IDEasure 138971 Gator Mulching Blades for 42-Inch Deck – 2 Pack, Compatible with Craftsman Husqvarna Poulan Lawn Tractors","description":"\u003ch2\u003eMeet IDEASURE 138971 Gator Mulching Blades for 42-Inch Decks\u003c\/h2\u003e\n\u003cp\u003eWhen it’s time to refresh your mower’s cutting performance, IDEASURE 138971 blades deliver robust durability in a single-piece steel design. This 2-pack set replaces many older part numbers, making it easier to keep your lawn looking even and well mulched.\u003c\/p\u003e\n\u003cp\u003eBuilt for resilience, each blade is engineered from thick steel to withstand regular mowing sessions, resist bending, and retain a sharp edge. The 21-inch length and 2-1\/2-inch width with a 5-point star center hole balance stability and momentum, helping you maintain consistent airflow and mulch quality across varying grasses and terrains.\u003c\/p\u003e\n\n\u003ch3\u003eKey benefits at a glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eWide compatibility: fits 42-inch deck mowers across brands such as Husqvarna, Craftsman, and Poulan, along with several others listed in compatibility notes.\u003c\/li\u003e\n  \u003cli\u003eEfficient cutting: designed for even, precise mulching, helping clippings feed back into the lawn rather than scattering unevenly.\u003c\/li\u003e\n  \u003cli\u003eDurable construction: one-piece thick steel for long service life and reliable mowing performance.\u003c\/li\u003e\n  \u003cli\u003eValue in a two-pack: ready for replacement in pair, minimizing downtime and ensuring you always have a spare on hand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat you should know before ordering\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, confirm that the blade matches your mower model. The set is 2 blades long, and the center hole is a 5-point star pattern to fit compatible spindles.\u003c\/p\u003e\n\n\u003ch3\u003eReal-life use ideas\u003c\/h3\u003e\n\u003cp\u003eImagine mowing on a sunny afternoon and hearing a steady, confident hum as the blades glide through tall grass. The result is a neat, even finish with fewer passes, plus easier cleanup as mulched clippings feed back into the turf.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specs at a glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 2 blades per package\u003c\/li\u003e\n  \u003cli\u003eModel: 138971\u003c\/li\u003e\n  \u003cli\u003eLength: 21 inches\u003c\/li\u003e\n  \u003cli\u003eWidth: 2-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003eThickness: 0.197 inches\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 5-point star\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThese IDEASURE blades are designed to complement 42-inch deck mowers, helping you maintain a well-mulched lawn with less effort while keeping your equipment in good condition for seasons to come.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What decks is the IDEASURE 138971 blade compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits 42-inch mower decks and works with many popular brands; verify model compatibility in the notes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Includes 2 mulching blades with 5-point star center hole; ensure proper fit before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43982301462662,"sku":"B0DQX1P6TZ","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-138971-mulching-blades-42-inch-deck.jpg?v=1778751332"},{"product_id":"ideasure-601124-high-lift-blades-for-54-inch-decks-3-pack-797696-mower-blades-compatible-with-hu-stler-raptor-sd-fastrak-super-z","title":"IDEASURE 601124 High Lift Blades for 54 Inch Decks – 3 Pack, 797696 Mower Blades Compatible with Hu-stler Raptor SD, FasTrak, Super Z","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eUpgrade your lawn care with IDEASURE 601124 High Lift Blades, designed for 54 inch mower decks. This 3 pack replaces a wide range of part numbers, including 601012, 601012X, 601013, 601013X, 601124, 601124X, 601124Y, 602416, 602416X, 602416Y, 797696, 797696X, 797696Y, 797704, 797704X, 797704Y, 797712, 797712X, and 797712Y. The goal is straightforward: keep your mower ready for the next cut with parts that fit smoothly across popular Hu-stler and other 54 inch deck models.\u003c\/p\u003e\u003cp\u003eThe blades are built for real world mowing now and later, with a blend of durability and performance that helps you tackle a variety of grasses and terrains without needing to shop around for replacement parts every season.\u003c\/p\u003e\u003ch2\u003eWhy choose IDEASURE 601124 blades\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDurable one piece thick steel construction that promotes longer service life and consistent mowing performance.\u003c\/li\u003e\n\u003cli\u003eHigh lift design to help the blade engage the grass and lift clippings, contributing to efficient cutting on dense or tough turf.\u003c\/li\u003e\n\u003cli\u003ePrecise fit for 54 inch decks with a center hole designed for secure mounting and reliable operation.\u003c\/li\u003e\n\u003cli\u003eValue in a 3 pack, so you have ready replacements on hand for quick swaps as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat you get and the blade specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePackage includes 3 blades, sized for 54 inch mower decks.\u003c\/li\u003e\n\u003cli\u003eLength: 18-1\/2 inches; Width: 2-1\/2 inches; Thickness: 0.197 inches.\u003c\/li\u003e\n\u003cli\u003eCenter hole: 5\/8 inch; designed for a stable, balanced mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and fit\u003c\/h2\u003e\u003cp\u003eThese IDEASURE blades are compatible with several Huslter and similar 54 inch models, including FasTrak, Raptor SD, X-One, Super Z, and more. Refer to the description for a comprehensive compatibility overview to confirm fit with your mower.\u003c\/p\u003e\u003ch2\u003eReal world use scenarios\u003c\/h2\u003e\u003cp\u003eIn practice, the blades may support a cleaner lift and even cut across mixed terrains, helping to maintain a neat mowing pattern from edge to edge. The thick steel construction and one piece design aim to deliver steady performance across varied grass types, season after season. They are presented as a practical option for replacing worn blades, reducing downtime, and keeping the mower operating with consistent results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models are compatible with IDEASURE 601124 High Lift Blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: These blades fit 54 inch mower decks and are compatible with Hu-stler Raptor SD, FasTrak, Super Z, X-One, and similar mowers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included and what are the blade dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Package includes 3 blades; each is 18-1\/2 inches long, 2-1\/2 inches wide, 0.197 inches thick, with a 5\/8 inch center hole.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43982368571526,"sku":"B0DQWXMFKF","price":49.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-601124-high-lift-blade-54-deck-front-view.jpg?v=1778754698"},{"product_id":"ideasure-tcu15881-high-lift-blades-for-60-inch-deck-3-pack-jd-ztrak-compatible","title":"IDEASURE TCU15881 High Lift Blades for 60-Inch Deck, 3-Pack, JD ZTrak Compatible","description":"\u003cp\u003eMeet the IDEASURE TCU15881 High Lift Blades, crafted for 60-inch mower decks and designed to refresh your outdoor routine. This three-pack replaces several older parts, offering a straightforward swap for a broad range of John Deere mowers and keeping you ready for action without multiple purchases.\u003c\/p\u003e\n\u003cp\u003eEach blade is forged from a single piece of thick steel, delivering durability that stands up to regular mowing and maintains dependable performance through repeated passes. The high lift geometry helps lift grass for an even cut and cleaner clippings, contributing to a tidy appearance with less effort on your part.\u003c\/p\u003e\n\u003cp\u003eCompatibility is broad, spanning Ztrak and EzTrak series and numerous other John Deere 60-inch configurations. This wide fit simplifies maintenance and compatibility checks, so you can focus more on mowing and less on compatibility hassles. Replacements covered by this set include TCU15881, M128485, M131958, M144196, M163983, M168223, among others, providing a streamlined swap when needed.\u003c\/p\u003e\n\u003cp\u003eThe package includes 3 blades, giving you ready replacements or rotation options for ongoing upkeep. Each blade measures 20-7\/8 inches in length, 3 inches in width, with a thickness of 0.157 inches and a center hole of 7\/8 inch, offering a balanced fit for standard 60-inch decks.\u003c\/p\u003e\n\u003ch3\u003eWhy choose IDEASURE blades\u003c\/h3\u003e\n\u003cp\u003eDuring mowing you may notice stable performance with balanced weight and sharp edges designed to slice through grasses cleanly. While results vary with grass type and conditions, these blades are designed to support a steady mowing rhythm and overall deck health when used as directed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDurable, one-piece thick steel construction supports longevity and dependable mowing performance.\u003c\/li\u003e\n\u003cli\u003eHigh lift design aids airflow and delivers an even cut across varying terrains and grass types.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThree blades per pack for convenient replacements or rotations.\u003c\/li\u003e\n\u003cli\u003ePrecise specs: 20-7\/8\" length, 3\" width, 0.157\" thickness, center hole 7\/8\".\u003c\/li\u003e\n\u003cli\u003eReplaces multiple part numbers to simplify ordering and maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, please verify that the blade matches your mower model and deck size to ensure a compatible fit. If you are unsure, compare the listed dimensions and center hole with your current blade.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which mowers is this IDEASURE blade compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits a broad range of John Deere Ztrak and EzTrak models; replaces part numbers TCU15881, M128485, M131958, M144196, M163983, M168223.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Three high-lift blades with 20-7\/8\" length, 3\" width, 0.157\" thickness, and a 7\/8\" center hole.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43982375878790,"sku":"B0DQWZC45F","price":70.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-tcu15881-high-lift-blade-60inch-deck.jpg?v=1778755260"},{"product_id":"ideasure-942-0616a-mulching-blades-for-42-inch-deck-4-pack-compatible-with-craftsman-troy-bilt-mtd","title":"IDEASURE 942-0616A Mulching Blades for 42-inch Deck – 4 Pack, Compatible with Craftsman, Troy-Bilt, MTD","description":"\u003cp\u003eIDEASURE 942-0616A mulching blades are designed for 42-inch deck riding mowers and are compatible with a broad range of brands. They replace a long list of part numbers, making it easier to source a match when you need a replacement. Crafted from a thick, single piece of steel, these blades offer strength and a longer service life, supporting steady mowing performance across seasons, climates, and grass varieties. The robust construction helps resist nicks and bending, while maintaining a sharp edge for consistent clippings.\u003c\/p\u003e\n\u003cp\u003eIn daily use, the blades balance cutting power with resilience. The single-piece steel design reduces weak points, helping maintain a true cutting edge even as you traverse uneven turf. Expect smooth operation across different grass types, early growth, and occasional damp conditions, with less frequent re-sharpening required.\u003c\/p\u003e\n\u003ch2\u003eDesigned for 42-inch decks and multiple brands\u003c\/h2\u003e\n\u003cp\u003eThe 42-inch deck footprint is matched to a wide range of mowers from brands like Craftsman, Troy-Bilt, Toro, and MTD. The blades are built to handle varied terrains and grass types, helping you achieve an even appearance with fewer passes. This broad compatibility makes it easier to find a replacement that aligns with your mower's deck width and mounting configuration.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces part numbers including 742-0616, 742-0616A, 742-04308, 942-0616, 942-0616A, 942-0616-X, 942-04126-X, 942-04308, 942-04312, 942-04312A, 112-0315, CMXGZAM110115.\u003c\/li\u003e\n\u003cli\u003eCompatible with many brands and models such as Cub Cadet, Troy-Bilt, Toro, and MTD; verify your mower model for a proper fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat’s in the box and key specs\u003c\/h2\u003e\n\u003cp\u003eEach package includes four blades designed for 42-inch decks. Key measurements help ensure a proper fit: length 21-3\/16 inches, width 2-3\/4 inches, thickness 0.157 inches, center hole pattern 6 point star. Blades are ready to refresh mowing performance on compatible equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 blades per package for replacement cycles.\u003c\/li\u003e\n\u003cli\u003eLength 21-3\/16 inches, width 2-3\/4 inches, thickness 0.157 inches, center hole 6 point star.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation and care tips\u003c\/h2\u003e\n\u003cp\u003eBefore ordering, confirm the blade matches your mower model and deck type. When installing, balance the blades properly and secure them to prevent vibration. Regular inspection and proper mounting help support safe operation and steady mowing performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mower decks are IDEASURE 942-0616A blades compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for 42-inch decks and compatible with Craftsman, Troy-Bilt, Toro and MTD riding mowers; verify model fit before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the main benefits of using IDEASURE 942-0616A blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Durable single piece steel and balanced cut provide consistent results across grass types and terrains.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43982645330054,"sku":"B0DRPQ62LG","price":55.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-942-0616a-blades-42-inch-deck.jpg?v=1778762418"},{"product_id":"ideasure-103-0301-3-pack-mulching-blades-for-60-inch-deck-ex-mark-lazer-z-compatible","title":"IDEASURE 103-0301 3-Pack Mulching Blades for 60-Inch Deck — Ex-Mark Lazer Z Compatible","description":"\u003ch2\u003eBoost mowing efficiency with IDEASURE 103-0301 mulching blades\u003c\/h2\u003e\n\u003cp\u003eUpgrade your 60-inch mower deck with IDEASURE 103-0301, a three-pack of mulching blades designed for durability and consistent cutting. Each blade is crafted from thick, single-piece steel to resist bending and wear, helping you maintain a clean, even lawn while reducing the frequency of blade changes. The result is a mower that feels steadier under foot and performs smoothly from edge to edge, even when navigating uneven turf or tall grass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey benefits in everyday use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEven, precise cuts across varied terrains promote a neat appearance with less streaking.\u003c\/li\u003e\n  \u003cli\u003eSolid one-piece construction enhances durability and long-term service life, supporting reliable mowing performances over seasons.\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit a 60-inch deck, helping you standardize blade upgrades across compatible equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility at a glance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBecomes a versatile option for Ex-Mark Lazer Z models, including AS, LC, XP, XS, Turf Ranger, and Turf Tracer Hydro configurations.\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with additional Ex-Mark and similar-brand mowers that use a 60-inch deck and similar blade geometry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get and how to size it up\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree blades in each pack, each blade measuring 20-1\/2 inches in length and 2-1\/2 inches in width.\u003c\/li\u003e\n  \u003cli\u003eBlade thickness of 0.203 inches with a center hole of 5\/8 inch for secure mounting.\u003c\/li\u003e\n  \u003cli\u003eBefore purchasing, verify your mower’s model and deck compatibility to ensure a proper fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBeyond the specs, these blades are built to handle varied mowing conditions—from soft, damp grass to dry, tougher turf—offering a potential improvement in mowing efficiency without altering the mower’s baseline performance. They represent a practical, no-nonsense upgrade for outdoor maintenance routines, with emphasis on durability, balance, and consistent cutting results.\u003c\/p\u003e\n\u003ch3\u003eUsage notes and care tips\u003c\/h3\u003e\n\u003cp\u003eHandle blades with care during installation, rotate to confirm even balance, and inspect mounting hardware before each use. Regular inspection of blade edge sharpness can help sustain cutting quality and minimize runtime interruptions.\u003c\/p\u003e\n\u003cp\u003eIf you’re seeking a straightforward blade upgrade for a 60-inch deck, IDEASURE 103-0301 blades provide a solid balance of durability, compatibility, and cutting consistency that aligns with common lawn care routines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mower models are compatible with IDEASURE 103-0301 blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with Ex-Mark Lazer Z AS\/LC\/XP\/XS, Turf Ranger, Turf Tracer Hydro, and other 60-inch deck mowers with matching geometry.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included in the IDEASURE 103-0301 3-pack blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Three mulching blades, each 20-1\/2 inches long, 2-1\/2 inches wide, 0.203 inches thick, with a 5\/8 inch center hole.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43982902395014,"sku":"B0D2NRSQQ1","price":55.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/idesure-103-0301-mower-blade-pack.jpg?v=1778772609"},{"product_id":"ideasure-00273100-mulching-blades-for-36-52-inch-decks-3-pack","title":"IDEASURE 00273100 Mulching Blades for 36–52 Inch Decks | 3-Pack","description":"\u003cdiv\u003e\n  \u003ch2\u003eOverview\u003c\/h2\u003e\n  \u003cp\u003eUpgrade your mowing routine with the IDEASURE 00273100 mulching blades. Designed as a versatile replacement, these blades fit for 36 and 52 inch mower decks and can replace a wide range of part numbers. Forged from thick steel in a single, uninterrupted piece, they’re built to stand up to regular mowing and provide a steady, dependable cut over many uses.\u003c\/p\u003e\n  \u003ch3\u003eKey benefits\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDurable, single-piece steel construction supports long service life and steady performance.\u003c\/li\u003e\n    \u003cli\u003eEfficient cutting across varied terrains and grass types for a smoother mowing experience.\u003c\/li\u003e\n    \u003cli\u003eThree blades per package enable quick swaps to minimize downtime during you next lawn session.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eCompatibility and replacement notes\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eReplaces part numbers including 00273100 and several others listed in the description.\u003c\/li\u003e\n    \u003cli\u003eCompatible with Ariens (requires 3 blades for 52 inch decks); Bunton, Exmark, Gravely, John Deere (2 blades for 36 inch decks, 3 for 52 inch decks); Bobcat (2 blades for 36 inch or 54 inch decks).\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eProduct specs\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003ePackage includes 3 blades.\u003c\/li\u003e\n    \u003cli\u003eBlade length: 17-7\/8 in; width: 2-1\/2 in; center hole diameter: 5\/8 in; thickness: 0.197 in.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eUsage notes: Before purchasing, confirm the blades match your mower model to ensure balanced operation. When installing, handle with care and refer to your mower manual for any torque guidance needed for a secure fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What decks and brands are compatible with these IDEASURE mulching blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for 36 and 52 inch decks, replacing many part numbers. Compatibility includes Ariens (3 for 52 in), Bunton, Exmark, Gravely, John Deere (2 for 36 in, 3 for 52 in), and Bobcat (2 for 36 in or 54 in).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the blade dimensions and packaging for IDEASURE 00273100?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each blade is 17-7\/8 in long, 2-1\/2 in wide, center hole diameter 5\/8 in, thickness 0.197 in. Pack includes 3 blades.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43983168733318,"sku":"B0DRKWTJWW","price":49.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-00273100-mulching-blade-closeup-steel.jpg?v=1778780292"},{"product_id":"ideasure-759-3829-mulching-blades-for-38-inch-deck-2-pack-cub-cadet-compatible","title":"IDEASURE 759-3829 Mulching Blades for 38-inch Deck - 2 Pack, Cub Cadet Compatible","description":"\u003cdiv\u003e\n  \u003ch2\u003eEnhance your Cub Cadet mowing with IDEASURE 759-3829 Mulching Blades\u003c\/h2\u003e\n  \u003cp\u003eThis 2-pack provides a reliable replacement option for a range of Cub Cadet and LT-series models. Designed for a 38-inch deck, the blades are built to handle varied lawns with steady performance while delivering a clean, mulched finish. The construction emphasizes durability and consistent mowing results across sessions, making routine maintenance smoother and less interrupted by blade wear.\u003c\/p\u003e\n  \u003cp\u003eRather than a simple swap, these blades are tuned to work with your deck geometry to promote efficient airflow and a balanced cut. Users may notice fewer clumps and a steadier striping pattern as grass is clipped and returned to the turf in finely shredded clippings.\u003c\/p\u003e\n  \u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eReplaces part numbers: 759-3829, 742-0321, 742-0322, 742-3032, 742P3032, 942-0473A, 91-057, 325-742\u003c\/li\u003e\n    \u003cli\u003eFits Cub Cadet models: 1515, 1525, 213, 2130, 2135, 2146, LT-2138\u003c\/li\u003e\n    \u003cli\u003eDesigned for 38-inch mower decks\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eDurability and cutting performance\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOne-piece thick steel construction offers robust durability and longer service life\u003c\/li\u003e\n    \u003cli\u003eBalanced geometry supports consistent, reliable mowing across varied terrains\u003c\/li\u003e\n    \u003cli\u003eMulching design helps finely chop clippings for a cleaner yard setup\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eSpecification at a glance: each blade measures 19-5\/16 inches in length, 2-11\/16 inches in width, 0.197 inches thick, with a 3\/4 inch center hole. The package includes 2 blades. Before ordering, confirm the blade dimensions match your mower to ensure proper fitment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What Cub Cadet models are compatible with IDEASURE 759-3829 blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Cub Cadet models 1515, 1525, 213, 2130, 2135, 2146, LT-2138 and related units.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the blade specifications and package contents?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each blade is 19-5\/16 inches long, 2-11\/16 inches wide, 0.197 inches thick, with a 3\/4 inch center hole; package includes 2 blades.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43983364128902,"sku":"B0DQ82KKBH","price":49.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-mulching-blades-38-deck-side-view.jpg?v=1778784384"},{"product_id":"ideasure-5020843s-lawn-mower-blades-3-pack-for-48-inch-deck-with-high-lift-compatible-with-exmark-ferris-gravely","title":"IDEASURE 5020843S Lawn Mower Blades – 3-Pack for 48-Inch Deck with High Lift, Compatible with Exmark Ferris Gravely","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eUpgrade your mowing session with the IDEASURE 5020843S blades. Designed for 48‑inch decks, this 3‑pack delivers reliable replacements that aim for an even, consistent cut across a variety of grasses and terrains. The blades are built to replace a wide range of part numbers from major brands, helping you find a compatible option without unnecessary searching.\u003c\/p\u003e\u003ch3\u003eDurability and design\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConstructed from a single piece of thick steel for lasting strength and steady performance.\u003c\/li\u003e\n\u003cli\u003eHigh lift geometry enhances airflow and helps with efficient clippings management on dense growth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting performance and versatility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBalanced design promotes an even cut on both flat and uneven ground.\u003c\/li\u003e\n\u003cli\u003eEffective across different grass types, supporting a consistent mowing experience from light turf to tougher patches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications and compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePackage includes 3 blades, each measuring 16-1\/4 inches long, 2-1\/2 inches wide, 0.197 inches thick, with a 5\/8 inch center hole.\u003c\/li\u003e\n\u003cli\u003eReplaces a broad list of part numbers from Ferris, Exmark, Gravely, Husqvarna, Kees, Lesco, Simplicity, Ariens, Bobcat, and more; verify fit with your specific model before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What decks are IDEASURE 5020843S blades compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The IDEASURE 5020843S blades fit many 48-inch mower decks from Ferris, Exmark, Gravely, Husqvarna, Toro, and more; check your model before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many blades come in the IDEASURE 5020843S 3-pack?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes three IDEASURE 5020843S blades for easy replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43983460335750,"sku":"B0D2NRZ6JV","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-5020843s-blade-48-inch-deck.jpg?v=1778785951"},{"product_id":"ideasure-759-3939-mower-blades-for-44-inch-decks-3-pack-742-3036-compatible","title":"IDEASURE 759-3939 Mower Blades for 44-Inch Decks - 3 Pack, 742-3036 Compatible","description":"\u003cdiv\u003e\n  \u003ch2\u003eUpgrade your mowing performance with IDEASURE 759-3939 blades\u003c\/h2\u003e\n  \u003cp\u003eThese blades are designed for 44-inch mower decks and replace a broad set of part numbers, including 759-3929 and 742-3036. They offer versatile compatibility with models like Cub Cadet GT2186 and GT2544, among others, helping you keep mowing sessions uninterrupted by parts mismatches.\u003c\/p\u003e\n  \u003cp\u003eManufactured as a single piece from thick steel, these blades emphasize durability and a longer service life. In real-world use, you may notice a steady mowing feel and a clean, even cut across different terrains thanks to a balanced design and robust construction.\u003c\/p\u003e\n  \n  \u003ch3\u003eWhy choose IDEASURE 759-3939 blades\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eHigh-quality, single-piece steel for strength and long service life\u003c\/li\u003e\n    \u003cli\u003eThree blades per package for maintenance readiness and spares\u003c\/li\u003e\n    \u003cli\u003eEngineered for 44-inch decks to deliver even, precise cuts on varied lawns\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \n  \u003ch3\u003eKey specifications\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eLength: 15-7\/8 inches\u003c\/li\u003e\n    \u003cli\u003eWidth: 2-1\/2 inches\u003c\/li\u003e\n    \u003cli\u003eThickness: 0.197 inches\u003c\/li\u003e\n    \u003cli\u003eCenter hole: 3\/4 inch\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \n  \u003cp\u003eBefore placing an order, please compare these specs with your mower’s blade mounting. While this set is designed for broad compatibility, verifying the fit helps ensure a smooth mowing experience and minimizes downtime.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this IDEASURE blade pack compatible with my mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The blades fit many 44-inch deck mowers; check your mower model before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Three blades sized 15-7\/8 inches long, 2-1\/2 inches wide, 0.197 inches thick, with a 3\/4 inch center hole.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43983460827270,"sku":"B0D25M6R6S","price":56.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-759-3939-blade-pack-44inch-deck.jpg?v=1778785974"},{"product_id":"ideasure-engine-control-cable-946-1130-746-1130-compatible-with-mtd-cub-cadet-troy-bilt","title":"IDEASURE Engine Control Cable 946-1130 \/ 746-1130 — Compatible with MTD, Cub Cadet, Troy-Bilt","description":"\u003ch2\u003ePremium replacement engine control cable for lawn mowers\u003c\/h2\u003e\n\u003cp\u003eThe IDEASURE engine control cable 946-1130 \/ 746-1130 is designed as a direct replacement for select mower models. If your mower lists 946-1130 or 746-1130 as the required part number, this cable is a suitable match. The flexible steel wire rope and protective conduit blend durability with flexibility, letting you respond to throttle input with a smooth tug on the handle, even during longer mowing sessions.\u003c\/p\u003e\n\u003cp\u003eBuilt to perform in yard work, this cable is engineered to withstand outdoor conditions: weather exposure, grass clippings, and the occasional snag from undergrowth. The galvanized steel core resists wear and rust, while the outer plastic conduit provides shielding against nicks and cuts that can occur during routine mowing. This combination aims to keep throttle control responsive as you navigate challenging terrain or dense grass.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and fit\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility covers a broad range of brands and models including MTD, Yard Machines, Troy-Bilt, Cub Cadet, Bolens, Huskee, Craftsman, Toro, and more.\u003c\/li\u003e\n  \u003cli\u003ePart numbers 946-1130 and 746-1130 are the direct match for this replacement cable; verify your mower’s part number before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat you get and how it's designed\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSturdy construction: galvanized steel wire rope with a protective conduit for long life in outdoor use.\u003c\/li\u003e\n  \u003cli\u003eSimple installation: includes Z-bend on each end and a plastic clip for quick, tool-light setup.\u003c\/li\u003e\n  \u003cli\u003eWhat’s not included: extension springs and zip ties are not included, allowing you to source compatible components as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions and setup tips\u003c\/h3\u003e\n\u003cp\u003eOverall cable length is 54 1\/2 inches with a conduit length of 40.9 inches. Each package contains one engine control cable. You may adjust the length to fit your mower if needed, ensuring the ends align with the throttle linkage and mounting points. This flexibility can help you tailor the setup to your specific model and handle position.\u003c\/p\u003e\n\n\u003ch3\u003eReal-world use scenarios\u003c\/h3\u003e\n\u003cp\u003eIn routine lawn care, a responsive throttle control helps you manage cutting speed and maneuverability across varying grass heights. The durable materials resist wear when you move across rough patches or through damp grass after a rain. A straightforward install supports seasonal maintenance without long downtime, making it a practical addition to a mower repair kit.\u003c\/p\u003e\n\n\u003ch3\u003eWhy choose IDEASURE\u003c\/h3\u003e\n\u003cp\u003eIDEASURE focuses on practical, ready-to-fit parts designed to restore function without unnecessary complexity. This cable’s blend of rugged metal and protective shielding offers a dependable option for those seeking a reliable replacement that fits a wide range of popular lawn tractor brands without overpromising outcomes. Expect a straightforward, durable piece that supports steady throttle response during regular yard work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mower models is this IDEASURE engine control cable compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It matches models listing 946-1130 or 746-1130 and works with brands like MTD, Yard Machines, Troy-Bilt, Cub Cadet, Bolens, Huskee, Craftsman, Toro.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools are needed for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required; ends are Z-bend with a plastic clip, but springs or zip ties are not included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43987158663302,"sku":"B095P4B1RL","price":12.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-946-1130-engine-cable-closeup.jpg?v=1778835278"},{"product_id":"ideasure-119-2379-290-945-traction-control-cable-for-toro-recycler-22-inch-lawn-mower","title":"IDEASURE 119-2379 290-945 Traction Control Cable for Toro Recycler 22-Inch Lawn Mower","description":"\u003cdiv\u003e\n  \u003ch2\u003ePremium replacement traction control cable for Toro Recycler 22\" decks\u003c\/h2\u003e\n  \u003cp\u003eUpgrade your Toro Recycler mower with the IDEASURE 119-2379 290-945 Traction Control Cable. This direct replacement is designed to restore smooth control when engaging the drive and self-propel features, helping you maintain steady progress across varied yard conditions. Before you order, double-check the replacement part number to ensure a perfect fit for your model.\u003c\/p\u003e\n  \u003cp\u003eCompatibility covers a broad range of Toro Recycler mowers with a 22\" deck, including models such as 20330, 20330C, 20331, 20331C, 20339, 20339C, 20350, 20351, 20370, 20371, 20377, 20378, 20379, 20954, 20959, 21761, and more. This ensures that many current and older configurations have a viable replacement option when the cable wears or breaks.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eReinforced design for lasting performance\u003c\/strong\u003e — the belt pulley end features a larger spring\/hook, and the connection to the operator handle is wrapped in steel for added strength. This thoughtful reinforcement aims to withstand regular use and reduce the likelihood of breakage at critical points.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eEasy installation for busy yards\u003c\/strong\u003e — specifically engineered for Toro self-propelled mowers, this 290-945 cable is built to simplify replacement. Expect a straightforward swap that minimizes downtime and avoids complex tool requirements.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eMeasurements you can plan around\u003c\/strong\u003e — cable length is 65-1\/2 inches with a 53-inch conduit, and each package includes one 119-2379 cable. If needed, you can adjust the length to fit your mower, ensuring the z-bend on one end and the spring on the other remain secure and properly tensioned.\u003c\/p\u003e\n  \u003ch3\u003eWhat this could mean for your mowing routine\u003c\/h3\u003e\n  \u003cp\u003eHaving a well-fitting traction cable can support consistent engagement of drive and self-propel functions, contributing to smoother starts and reliable performance across different grass lengths and terrains. While results vary by mower condition and usage, a high-quality replacement may help reduce dragging, uneven speed, and unexpected tension changes during cutting sessions.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eCompatibility: suitable for Toro Recycler 22\" deck models listed above\u003c\/li\u003e\n    \u003cli\u003eDurability: reinforced connections reduce common wear points\u003c\/li\u003e\n    \u003cli\u003eEase of replacement: designed for quick, tool-light installation\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cul\u003e\n    \u003cli\u003eLength and fit: 65-1\/2\" cable, 53\" conduit, adjustable as needed\u003c\/li\u003e\n    \u003cli\u003eIncludes: one 119-2379 traction cable\u003c\/li\u003e\n    \u003cli\u003eBrand assurance: IDEASURE replacement parts\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mower models is this IDEASURE traction cable compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Toro Recycler mowers with a 22-inch deck and matches part numbers 119-2379 and 290-945.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know if this cable will fit my mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your deck size and replacement part number; verify against the Toro Recycler 22-inch models listed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43987160039558,"sku":"B09577VTDP","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-traction-cable-toro-119-2379-290-945-full-cable.jpg?v=1778835302"},{"product_id":"ideasure-control-cable-for-mtd-craftsman-lawn-mowers-replaces-946-04661-746-04661","title":"IDEASURE Control Cable for MTD\/Craftsman Lawn Mowers – Replaces 946-04661 \u0026 746-04661","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe IDEASURE control cable is a carefully designed replacement that fits a broad range of 21\" deck walk-behind lawn mowers. Built to work across many popular brands, this cable helps keep your mower’s control lever responsive and consistent, even as parts wear over time. With clear length specifications and bend configurations, it’s a practical option for those who want to refresh their mower without guessing at compatibility.\u003c\/p\u003e\n\u003ch3\u003eWhat this replacement covers\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers: 746-04661, 746-04661A, 946-04661, 946-04661A, so you can cross-check against your parts list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility and fit\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many brands, including MTD, Troy-Bilt, Craftsman, Yardman, Yard Machine, Murray, Huskee, Bolens, Cub Cadet, and more 21\" deck walk-behind mowers.\u003c\/li\u003e\n  \u003cli\u003eCable length is 51 inches with a conduit length of 37.5 inches; you can adjust the overall length to match your mower’s needs.\u003c\/li\u003e\n  \u003cli\u003eEnd bends on both ends aid straightforward installation and reliable routing around pulleys and levers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, verify the replacement part number against your mower model to ensure a correct match. While this IDEASURE cable is designed for broad compatibility, double-checking helps minimize return hassles and post-purchase adjustments.\u003c\/p\u003e\n\u003ch3\u003eInstallation tips and real-world use\u003c\/h3\u003e\n\u003cp\u003eThe cable’s bend geometry and standard fittings are intended for a straightforward swap, even if you’re updating from a worn or stretched cable. Expect smoother engagement when you pull the lever and fewer re-adjustments after the initial setup.\u003c\/p\u003e\n\u003cp\u003eUse cases include seasonal maintenance, quick repairs after a snag or wear, and stocking a spare part for routine upkeep. The result is ongoing mowing readiness for typical home lawns, without the guesswork of incompatible replacements.\u003c\/p\u003e\n\u003ch3\u003eWhy IDEASURE\u003c\/h3\u003e\n\u003cp\u003eIDEASURE focuses on reliable, broadly compatible parts designed to fit a wide range of models. This replacement cable combines essential length, bend features, and practical guidance to help you complete a repair with minimal tools and downtime.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mowers does this IDEASURE control cable fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This replacement cable covers many 21\" deck mowers, including MTD, Troy-Bilt, Craftsman, Yardman, Yard Machine, Murray, Huskee, Bolens, Cub Cadet, and more.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the length specifications and installation notes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The cable is 51 inches long with a 37.5-inch conduit, and features end bends for easier setup; verify part numbers before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43988359741574,"sku":"B095P76Q2R","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-control-cable-assembly-51in.jpg?v=1778845945"},{"product_id":"ideasure-781-0080-edger-blade-9-x-2-5-replacement-for-mtd-more-1-pack","title":"IDEASURE 781-0080 Edger Blade - 9\" x 2.5\" Replacement for MTD \u0026 More (1 Pack)","description":"\u003carticle\u003e\n  \u003ch2\u003eOverview\u003c\/h2\u003e\n  \u003cp\u003eRefresh your edging results with the IDEASURE 781-0080 Edger Blade. This 9 inch replacement blade is engineered to deliver clean, consistent edges along driveways and sidewalks when paired with compatible edgers. While results depend on the tool and grass conditions, many users appreciate the reliability of a quality blade swap and the sense of renewed precision it offers during routine yard work.\u003c\/p\u003e\n  \u003cp\u003eThe blade is built to support regular edging tasks with a focus on stable cutting and straightforward alignment. It is designed to serve as a dependable upgrade for worn or damaged blades, helping you maintain defined lines around lawn borders without constant tool changes.\u003c\/p\u003e\n\n  \u003ch2\u003eCompatibility and Fit\u003c\/h2\u003e\n  \u003cp\u003eThe blade is designed to replace several part numbers and works with a wide range of equipment. It fits MTD edgers in the 25B-550 family and extends compatibility to Troy-Bilt, Yard Machines, Bolens, and Huskee models. To confirm fit, compare model numbers and the blade’s dimensions with your current part.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eReplaces Part Numbers: 781-0080, 781-0080-0637, 981-0080, 753-06561, 490-105-M016, 490-105-M023, 375-287, 40-316, 2148, 7-05820\u003c\/li\u003e\n    \u003cli\u003eCompatible Brands: MTD, Troy-Bilt, Yard Machines, Bolens, Huskee and newer edger models\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003ePerformance and Features\u003c\/h2\u003e\n  \u003cp\u003eWith a 9 inch cutting diameter and a thickness of 0.12 inch, the IDEASURE blade is crafted to deliver stable edging for defined lines along hardscapes. Its edge geometry supports straightforward alignment and consistent contact with the ground, enabling clean passes along the edge of pavements and soil borders.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e9 inch length x 2.5 inch width; center hole diameter 5\/8 inch\u003c\/li\u003e\n    \u003cli\u003eImproves edge appearance along driveways and sidewalks\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\n  \u003cp\u003eInstallation is designed to be quick and tool-friendly. Loosen the blade nuts with a wrench, swap the blade, and tighten securely before use. Following safety procedures ensures a safe and efficient replacement. Regular checks help maintain edge quality over time.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eTurn off power and disconnect applicable ignition source\u003c\/li\u003e\n    \u003cli\u003eRemove the old blade and replace with the IDEASURE blade\u003c\/li\u003e\n    \u003cli\u003eTighten nuts to secure the blade and test operation\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eWhat is Included\u003c\/h2\u003e\n  \u003cp\u003eEach order includes one IDEASURE 781-0080 edger blade in the specified replacement size.\u003c\/p\u003e\n\n  \u003ch3\u003eCare and Longevity Tips\u003c\/h3\u003e\n  \u003cp\u003eInspect for wear, burrs, or chips after use. Clean off soil and store blades in a dry place to prevent corrosion. Using the correct orientation and mounting helps sustain edge quality across seasons.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eInspect for wear and burrs; replace if damaged\u003c\/li\u003e\n    \u003cli\u003eStore in a dry location away from moisture\u003c\/li\u003e\n    \u003cli\u003eUse correct mounting orientation to maximize edge quality\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/article\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models does the IDEASURE 781-0080 Edger Blade fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with MTD 25B-550 series, Troy-Bilt, Yard Machines, Bolens, and Huskee edgers; verify your model before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation difficult?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It swaps in with a simple wrench; ensure engine is off and follow standard blade-tightening torque.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43988875444358,"sku":"B0DQLBYQYY","price":17.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-781-0080-edger-blade-front.jpg?v=1778857272"},{"product_id":"ideasure-drive-cable-581952101-for-husqvarna-hu700-hu725-hd800-series-replaces-532431650","title":"IDEASURE Drive Cable 581952101 for Husqvarna HU700 HU725 HD800 Series | Replaces 532431650","description":"\u003ch2\u003eProduct overview\u003c\/h2\u003e\n\u003cp\u003eRestore reliable drive control to your Husqvarna mower with the IDEASURE 581952101 drive cable. This replacement is designed to match the original specifications and supports a wide range of Husqvarna models, helping you keep your lawn looking even and well‑mowed without the downtime of a misfit part.\u003c\/p\u003e\n\u003cp\u003eDesigned for real‑world use, this cable replaces several factory numbers and is built to align with the mower’s drive system. The result can feel like a return to familiar responsiveness when you set off across a lawn, greet a hill, or navigate around obstacles with steady tension on the lever.\u003c\/p\u003e\n\n\u003ch3\u003eKey compatibility and design highlights\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers: 581952101, 532431650, 431650.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Husqvarna models such as HU700, HU725, HD725\/HD800 series, and related variants listed in the product data.\u003c\/li\u003e\n  \u003cli\u003eEasy to install with a Z‑bend on one end and a T‑barrel on the other for a straightforward setup.\u003c\/li\u003e\n  \u003cli\u003eCable length: 57.3 inches. Conduit length: 53.5 inches. You can adjust the length to fit your mower if needed.\u003c\/li\u003e\n  \u003cli\u003ePlease check the replacement part number before ordering to ensure a proper match with your mower model.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment, setup, and tips\u003c\/h3\u003e\n\u003cp\u003eBefore you begin, power off the mower and unplug or disconnect the battery if applicable. Route the new cable along the same path as the original, align the Z‑bend and T‑barrel ends with the control levers, and make a careful length adjustment if required to achieve balanced tension and smooth engagement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCross‑check your model list and the part numbers to confirm a match.\u003c\/li\u003e\n  \u003cli\u003eMeasure and adjust the installed cable length to meet the 57.3-inch specification when possible.\u003c\/li\u003e\n  \u003cli\u003eTest the drive function at low speed after installation to confirm smooth operation.\u003c\/li\u003e\n  \u003cli\u003eInspect for any kinks or excessive tension during use to prevent wear over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eReal‑world use scenarios\u003c\/h3\u003e\n\u003cp\u003eImagine mowing a slope with predictable drive control or cutting along tight borders where responsive handling matters. This replacement cable offers the potential for consistent engagement and a familiar feel, helping you complete chores with less fuss and downtime. While results can vary, the design aims to support reliable performance when fitted to the right model.\u003c\/p\u003e\n\n\u003cp\u003eNote: This description summarizes the notable features and real‑world applicability based on the product data. Availability, model compatibility, and performance may vary by unit and usage conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Husqvarna models is this IDEASURE drive cable compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits many Husqvarna models listed in the description, including HU700, HU725, HD800, and related variants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I verify the right replacement part before purchasing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check the part numbers (581952101 or 532431650) and compare them to your mower model to ensure a proper match.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43989169045638,"sku":"B09BCCQV5L","price":18.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-drive-cable-husqvarna-hu700-installation.jpg?v=1778858614"},{"product_id":"ideasure-1-1-4-in-x-3-ft-pool-hose-replacement-for-intex-coleman-summer-waves-above-ground-skimmers-pumps-filters","title":"IDEASURE 1-1\/4 in x 3 ft Pool Hose – Replacement for Intex, Coleman \u0026 Summer Waves Above-Ground Skimmers, Pumps \u0026 Filters","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eUpgrade your above-ground pool maintenance with IDEASURE’s 1-1\/4 inch x 3 ft pool hose. This replacement hose is designed to fit common 1.25\" connectors, making it a versatile option for managing water flow across skimmers, pumps, and filters. The hose combines practical size with reliable construction, aiming to provide a straightforward swap that helps you keep water moving smoothly throughout the season.\u003c\/p\u003e\n\n\u003cp\u003eCrafted for everyday use, the hose is lightweight yet durable, offering a flexible profile that’s easy to position around pool equipment. While it’s designed to work with popular brands, users should always verify compatibility with their specific fittings before installation. Think of it as a practical, multi-brand companion for keeping your pool system running without a major overhaul.\u003c\/p\u003e\n\n\u003ch2\u003eKey compatibility and fit\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 1-1\/4\" (1.25\") diameter connectors commonly found on surface skimmers, pool pumps, and filters.\u003c\/li\u003e\n  \u003cli\u003eCompatible with major above-ground pool brands such as Intex, Coleman, and Summer Waves.\u003c\/li\u003e\n  \u003cli\u003eIdeal as a replacement or spare hose to simplify routine maintenance and part swaps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDurable build and practical design\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMade from PE plastic with a corrugated body for flexibility and durability in outdoor environments.\u003c\/li\u003e\n  \u003cli\u003eLightweight, leak-resistant, and designed to handle regular pool use without adding significant weight to equipment setups.\u003c\/li\u003e\n  \u003cli\u003eWhite finish offers easy visibility against pool surroundings, helping you spot connections quickly during setup or troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecs and what's included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 1.25\" (31.7 mm); Length: 36\" (3 ft).\u003c\/li\u003e\n  \u003cli\u003ePackage includes: 1 x above-ground pool skimmer hose in white.\u003c\/li\u003e\n  \u003cli\u003eNo tools required—simply slip the hose onto compatible connectors for a quick setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWhether you’re replacing a worn hose or stocking a spare for busy pool seasons, IDEASURE’s 1-1\/4\" pool hose provides a practical, no-fuss option. It offers a balance of compatibility, ease of use, and durable construction that aligns with typical above-ground pool configurations. Consider it a potential upgrade to keep your pool’s return and suction paths functioning smoothly, without promising guaranteed results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What fittings does the IDEASURE 1-1\/4 in pool hose fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits 1.25\" connectors common on skimmers, pumps, and filters, compatible with Intex, Coleman, and Summer Waves systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included and how easy is installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes one white 3 ft hose; simply slip onto compatible connectors—no tools required for setup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43989395079302,"sku":"B0C28B77ZN","price":20.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-1-1-4-in-pool-hose-3ft.jpg?v=1778866473"},{"product_id":"ideasure-1-5in-x-3ft-pool-skimmer-hose-replacement-for-intex-above-ground-pool-part-10531-25016","title":"IDEASURE 1.5in x 3ft Pool Skimmer Hose Replacement for Intex Above Ground Pool – Part 10531 25016","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eKeep your pool circulation running smoothly with the IDEASURE 1.5in x 3ft pool skimmer hose replacement. Designed as a universal upgrade, this hose fits between your skimmer and pump, delivering steady flow and reliable performance. The hose is sized for common 1.5\" connections and is listed as a practical replacement for popular Intex and Summer Waves systems, including part numbers 10531 and 25016. Expect a flexible, durable component that is ready to handle regular pool maintenance on sunny days and busy weekends.\u003c\/p\u003e\u003cp\u003eWith a focus on practical reliability, IDEASURE offers a hose that blends ease of use with sturdy construction. It’s crafted to resist everyday wear, so you can replace a worn hose without equipment downtime. While results will vary by pool setup, many users appreciate improved flow consistency and straightforward installation when upgrading a skimmer hose.\u003c\/p\u003e\u003ch3\u003eCompatibility and fit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Intex models such as 28000E, 28335EH, 28337EH, 28341WA, 28345WA, 28365EH, 28375EH, 28395EH\u003c\/li\u003e\n\u003cli\u003eCompatible with Summer Waves X1000, X1500, and C2000 filter systems\u003c\/li\u003e\n\u003cli\u003eSuitable for other Intex, Coleman, or Summer Waves pools that require a 1.5\" hose connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x IDEASURE 1.5\" (1.5 inch) x 3 ft pool skim hose\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey benefits and practical use\u003c\/h3\u003e\u003cp\u003eThe skim hose is molded from durable plastic with smooth ends and a spiral-wound design to enhance flexibility. This helps prevent kinks and hard-to-connect spots, supporting steady suction and consistent water flow. The material is built to endure sun exposure, reducing the likelihood of premature wear. The 3-foot length offers a balanced reach for most above-ground pool setups, making it a convenient replacement that minimizes downtime when performing routine maintenance.\u003c\/p\u003e\u003cp\u003eIn real-world use, the hose can simplify swapping out worn parts during routine cleaning, make it easier to connect the skimmer to the pump, and support reliable transfer of debris to the filtration system. While the hose is not a guarantee of improved performance in every scenario, users commonly report smoother operation and fewer leaks when the hose ends are clean and fully seated.\u003c\/p\u003e\u003ch3\u003eInstallation tips\u003c\/h3\u003e\u003cp\u003eNo specialized tools are required. Simply align the hose ends with the skimmer and pump connections, push firmly until seated, and check for leaks after a short test run. Measure your original hose prior to purchase to confirm fit for your setup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this IDEASURE skimmer hose compatible with my Intex pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many Intex models listed and Summer Waves systems that use 1.5 inch hoses. Measure your original hose to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the 1.5in x 3ft hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No tools are required—just connect the hose to the skimmer or pump connections for use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43989395210374,"sku":"B0C2885FC1","price":20.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-1-5inch-skimmer-hose-3ft.jpg?v=1778866473"},{"product_id":"ideasure-8x2-universal-edger-blades-1-inch-center-hole-2-pack-echo-stihl-troy-bilt-craftsman-compatible","title":"IDEASURE 8x2 Universal Edger Blades – 1 Inch Center Hole, 2-Pack, Echo\/Stihl\/Troy-Bilt\/Craftsman Compatible","description":"\u003cp\u003eMeet the IDEASURE 8 x 2 universal edger blades, designed to fit a broad range of popular lawn edgers. These blades are crafted to help you create clean, well-defined edges along driveways, sidewalks, and garden borders. With a 1 inch center hole and a slender 0.11 inch profile, they slide into compatible tool heads with ease, offering steady control for precise edging tasks.\u003c\/p\u003e\n\u003cp\u003eConstructed from durable steel, the blades are built to withstand regular use while maintaining consistent performance. Over time, wear happens gradually, giving you predictable results rather than abrupt changes in edge quality. The reversible design means you can flip the blade when one side wears, effectively extending its usable life without immediate replacements.\u003c\/p\u003e\n\u003ch3\u003eTwo blades, broad compatibility, and practical convenience\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVersatile compatibility spans major brands such as Echo, Stihl, Troy-Bilt, Craftsman and more, reducing the guesswork when replacements are needed.\u003c\/li\u003e\n  \u003cli\u003eTwo blades per package, plus four attachment clips, so you have backups on hand and can swap quickly between tasks.\u003c\/li\u003e\n  \u003cli\u003eEasy installation supports minimal downtime; once mounted, you can flip the blade to use the opposite edge as wear occurs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs that matter for edging work\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDimensions: 8 inches long, 2 inches wide, center hole diameter 1 inch, thickness 0.11 inches.\u003c\/li\u003e\n  \u003cli\u003eIncludes: 2 edger blades and 4 attachment clips, ready for replacement use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote that compatibility depends on your specific edger model. IDEASURE aims to support a wide range of units, delivering practical, cost-conscious options for routine yard care. This two-pack setup offers value for users who perform regular edging and want dependable performance across multiple passes and edging scenarios.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models are compatible with the IDEASURE 8x2 universal edger blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A broad range of Echo, Stihl, Troy-Bilt, Craftsman, and Maruyama models are supported; verify dimensions 8x2 and 1 inch center hole for your unit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I install and maintain these blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mount the blade using the 1 inch center hole, flip when worn, and keep blades dry; clips are included for quick replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43989522120838,"sku":"B0DQLDW6TJ","price":16.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-edger-blade-8x2-universal.jpg?v=1778871538"},{"product_id":"ideasure-21-inch-mulching-blade-331737b-for-husqvarna-craftsman-ayp","title":"IDEASURE 21-Inch Mulching Blade 331737B for Husqvarna, Craftsman, AYP","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eExperience dependable cutting performance with the IDEASURE 21-inch mulching blade (model 331737B). Designed for a broad range of 21-inch decks, this blade aims to deliver consistent, precise results across various lawns—from manicured front yards to backyard fields.\u003c\/p\u003e\n\u003cp\u003eThe blade combines a durable steel build with a sharp, balanced edge that respects the rhythm of your mowing routine. The mulching design finely chops grass and returns it to the soil, supporting even growth and reducing the need for frequent bagging on certain setups.\u003c\/p\u003e\n\n\u003ch2\u003eKey features in practice\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility across many Husqvarna, Craftsman, and AYP Pou-LAN decks, with replacement part numbers listed in the specs.\u003c\/li\u003e\n  \u003cli\u003ePrecisely sized for 21-inch decks: length 21 inches, width 2-1\/4 inches, thickness 0.138 inches.\u003c\/li\u003e\n  \u003cli\u003eMounting pattern includes center hole 5\/8 inch and outer holes 3\/8 inch for standard setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility at a glance\u003c\/h3\u003e\n\u003cp\u003eThe blade replaces a wide range of OEM parts and is designed to fit diverse models. For exact alignment, compare your deck size and hole positions to the specifications in the listing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers: 165833, 165833B, 175064, 159267, 176135, 189028, 406706, 406712, 531300765, 532175064, 532176135, 532189028, 532406712, 539111878, 594893001, 917175064, 917175064PB, 917176135, 917532165833, 917532175064, 917532176135, 33275, 33524, 501807402, 531307235, 532145064, 532165833, 532437165, PP22024.\u003c\/li\u003e\n  \u003cli\u003eFits a wide array of AYP, Husqvarna, and Craftsman models listed in the compatibility notes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and quick-hitting installation tips\u003c\/h3\u003e\n\u003cp\u003ePackage includes one IDEASURE blade sized for a 21\" deck. Before ordering, confirm your mower uses a 21\" deck and that the mounting holes align with the listed specs. A balanced blade helps reduce vibration during cutting.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSpecifications: Length 21\", Width 2-1\/4\", Thickness 0.138\", Center Hole 5\/8\", Outside Hole 3\/8\".\u003c\/li\u003e\n  \u003cli\u003eInstallation reminder: check alignment and balance before first use to ensure a smooth, even cut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eReal-world use scenarios\u003c\/h3\u003e\n\u003cp\u003ePicture a weekend mowing session: the blade glides through tall or damp grass with steady momentum, producing clean, uniform clippings. On slopes, the balance helps maintain control and consistent cut quality across the blade span.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications at a glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eModel: IDEASURE 331737B\u003c\/li\u003e\n  \u003cli\u003eDeck compatibility: 21 inches\u003c\/li\u003e\n  \u003cli\u003eMaterial: robust steel with precise grinding\u003c\/li\u003e\n  \u003cli\u003eReplacement guidance: verify model and deck match prior to purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the IDEASURE 21-Inch Mulching Blade package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One IDEASURE blade (model 331737B) for 21-inch decks; compatible with many Husqvarna, Craftsman, and AYP models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How can I confirm the blade fits my mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Verify deck size is 21 inches and compare listed compatible models; confirm mounting hole pattern matches before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43989690286214,"sku":"B0DR8RRKF1","price":29.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-lawn-mower-blade-331737b-package.jpg?v=1778879860"},{"product_id":"ideasure-7019515-high-lift-blade-for-snapper-28-in-deck-rear-engine-rider-replaces-1-9515","title":"IDEASURE 7019515 High Lift Blade for Snapper 28-In Deck Rear Engine Rider | Replaces 1-9515","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eMeet IDEASURE 7019515 High Lift Blade, designed for Snapper 28 inch deck rear engine riders. This replacement blade blends robust steel with a geometry that supports a clean, even cut across varied lawns. It references multiple factory and aftermarket part numbers, helping you maintain mowing performance with fewer interruptions.\u003c\/p\u003e\n\u003cp\u003eIn real world mowing, the high lift profile helps grass stand up for a more uniform pass, while the single piece thick steel construction resists bending and wear. The blade length, width, thickness, and center hole are calibrated for reliable alignment on compatible mowers, so installation can feel straightforward and predictable.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility \u0026amp; Fit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces Part Number: Lesco 050200, Snapper 1-9515, 7019515, 7019515BMA, 7019515BZ, 7019515BZYP\u003c\/li\u003e\n\u003cli\u003eCompatible with Snapper 28 inch deck rear engine rider models including 250610T, 250612T, 25064S, 25065S, 25066S, 25069T, 250811BE, 250812BE, 250813BE, 250814B, 250814BE, 250815B, 250815BE, 250816B, 250816BE, 25083, 25083S, 2508 and related variants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance \u0026amp; Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality single piece thick steel for durability and consistent mowing results\u003c\/li\u003e\n\u003cli\u003eEfficient cutting optimized for a 28 inch mower deck to deliver an even pass across terrains\u003c\/li\u003e\n\u003cli\u003eSpecification: length 27-7\/8 inches; width 2-3\/4 inches; thickness 0.197 inches; center hole 1-1\/16 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBefore ordering, please verify that the blade matches your mower model and part number to ensure proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mowers is the IDEASURE 7019515 High Lift Blade compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Snapper 28-inch deck rear engine riders; verify model and part numbers before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What benefits can a high lift blade provide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It can help lift grass for an even cut and improve performance on varied terrains.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43989847343238,"sku":"B0D22PF2VQ","price":34.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-7019515-high-lift-blade-snapper-28-deck.jpg?v=1778888036"},{"product_id":"ideasure-055-8020-00-throttle-control-cable-replacement-for-bad-boy-zt-elite-maverick-more-53-inch","title":"IDEASURE 055-8020-00 Throttle Control Cable — Replacement for Bad Boy ZT Elite, Maverick \u0026 More (53-Inch)","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe IDEASURE 055-8020-00 throttle control cable is a purpose-built replacement designed to drop into your mower or tractor without the need for major modifications. It covers part numbers 055-8020-00, 055802000, and 290-100, making it a convenient option when you refresh a worn control line. With a 53-inch cable length and a 50-inch conduit, this unit is sized to fit a wide range of machines and configurations, so you can plan a swap during routine maintenance or a seasonal service.\u003c\/p\u003e\n\n\u003ch3\u003eWide compatibility\u003c\/h3\u003e\n\u003cp\u003eThe 055-8020-00 cable is listed as compatible with a broad set of models, including Maverick, Maverick HD, MZ, MZ Magnum, MZ Rambler, Raider, ZT Avenger, ZT Elite, CZT Elite, CZT, ZT, Walk Behind, and Compact Outlaw. This breadth helps reduce the guesswork when you compare replacement parts and can simplify inventory decisions for shop owners or home repair enthusiasts.\u003c\/p\u003e\n\n\u003ch3\u003eDurable, reliable materials\u003c\/h3\u003e\n\u003cp\u003eDesigned to endure demanding mowing conditions, the throttle cable uses premium steel and rubber. The insulated outer layer helps minimize wear from friction and exposure to the elements, supporting a stable feel under use and a longer service life compared with lower-cost options. The construction also contributes to resistance against rust and corrosion in typical outdoor environments.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and operation\u003c\/h3\u003e\n\u003cp\u003eUsers may notice a smoother throttle action thanks to the cable's tensile properties and careful assembly. The 53-inch length and robust conduit are arranged to reduce the risk of sticking or delay, so the throttle responds with a consistent, predictable motion when you reach for speed control in the heat of summer yard work.\u003c\/p\u003e\n\n\u003ch3\u003eKey benefits at a glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for specified part numbers, simplifying repairs\u003c\/li\u003e\n  \u003cli\u003eBroad compatibility across Maverick, MZ, ZT Elite, and more\u003c\/li\u003e\n  \u003cli\u003eDurable steel and rubber construction for longer life\u003c\/li\u003e\n  \u003cli\u003eSmooth throttle response with reduced risk of jams\u003c\/li\u003e\n  \u003cli\u003eClear size specs: 53-inch cable, 50-inch conduit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize, packaging, and fit\u003c\/h3\u003e\n\u003cp\u003eEach package includes a single replacement 055-8020-00 throttle control cable. Length details: 53 inches for the cable, 50 inches for the conduit. Before purchasing, confirm the part number is a match for your machine to ensure the best fit.\u003c\/p\u003e\n\n\u003ch3\u003eTips for installation and care\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify the part number and model compatibility before you buy\u003c\/li\u003e\n  \u003cli\u003eRoute the cable along a straight path; avoid sharp bends\u003c\/li\u003e\n  \u003cli\u003eKeep the connector and conduit dry when not in use to extend life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWhether you are keeping your mower in peak condition or completing a routine service, the IDEASURE 055-8020-00 throttle cable offers a practical option that prioritizes reliability and ease of use. It suggests a potential improvement in throttle feel and responsiveness, but results can vary with installation accuracy and overall mower maintenance routines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which mower models is the IDEASURE 055-8020-00 throttle cable compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with Maverick, Maverick HD, MZ, MZ Magnum, MZ Rambler, Raider, ZT Avenger, ZT Elite, CZT Elite, CZT, ZT, Walk Behind, and Compact Outlaw models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the cable specifications and what do I receive with my order?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Cable length is 53 inches; conduit length is 50 inches. Each package includes one 055-8020-00 throttle control cable.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43989856780422,"sku":"B0D5QWDYPN","price":26.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-throttle-cable-055-8020-00-close-up.jpg?v=1778888691"},{"product_id":"ideasure-tcu15882-high-lift-mower-blades-3-pack-for-72-decks-john-deere-compatibility","title":"IDEASURE TCU15882 High-Lift Mower Blades (3 Pack) for 72\" Decks – John Deere Compatibility","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eIDEASURE TCU15882 high-lift mower blades are crafted for 72\" decks and designed to pair with a broad range of John Deere tractors. This three-blade set emphasizes durability and dependable cutting performance, aiming to help you maintain a clean, even finish across varied lawns.\u003c\/p\u003e\n\u003ch3\u003eWide compatibility and fit\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces multiple part numbers (TCU1588S, M141669, M143749, M142514, M143159, M119975, EPC201693, 92-114, among others).\u003c\/li\u003e\n  \u003cli\u003eBuilt for 72\" decks and compatible with a wide selection of John Deere models, including popular 700-series, 800-series, 900-series, and Z-series tractors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuality construction\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-piece thick steel design for durability and long service life, supporting steady mowing performance over time.\u003c\/li\u003e\n  \u003cli\u003eHigh-lift geometry to help promote an even cut on a variety of terrains and grass lengths.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance and usage\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThree blades per pack provide balanced coverage to help maintain mower balance during operation.\u003c\/li\u003e\n  \u003cli\u003ePrecise dimensions: 24-15\/16\" length, 3\" width, 0.236\" thickness, 7\/8\" center hole, ensuring proper fit with compatible decks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs and installation notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes 3 blades. Before ordering, verify that these high-lift blades match your mower model and deck size for best results.\u003c\/li\u003e\n  \u003cli\u003eDesigned for use with smooth, even cuts on large, wide-cut decks, potentially improving mowing efficiency and balance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith IDEASURE, you may experience improved cutting efficiency and dependable performance during regular mowing tasks. This three-pack offers a practical option for keeping a 72\" deck in good condition, while variations in mowing results may occur based on mower condition and grass type.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What decks and models are compatible with IDEASURE TCU15882 blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for 72\" decks, these blades fit a wide range of John Deere tractors. Check your mower’s model and part numbers to confirm compatibility before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the 3-pack and how should I replace them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Includes three high-lift blades sized for 72\" decks. Before replacement, power off the mower, disconnect power, and follow your machine’s safety instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IDEASURE","offers":[{"title":"Default Title","offer_id":43989999353990,"sku":"B0D22PF2VJ","price":83.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/ideasure-tcu15882-high-lift-blades-72-deck.jpg?v=1778897259"}],"url":"https:\/\/patiozora.com\/collections\/brand-ideasure.oembed","provider":"PatioZora","version":"1.0","type":"link"}