{"title":"YAMAKATO — Outdoor \u0026 Garden Products","description":"\u003cp\u003e\u003cstrong\u003eYAMAKATO\u003c\/strong\u003e accounts for 34 listings in the PatioZora catalog, with its largest groups in pull cords (10 products) and generators (4). A mixed outdoor and garden range. Check the stated dimensions and materials on each listing, since sizing in this category varies widely between makers.\u003c\/p\u003e\u003cp\u003ePrices across this range run from about $12.58 to $42.72, with the middle of the range near $27.65. Free US shipping on every order.\u003c\/p\u003e","products":[{"product_id":"yamakato-5-8kw-avr-generator-voltage-regulator-rectifier-for-honda-gx-clones-more","title":"YAMAKATO 5–8kW AVR Generator Voltage Regulator Rectifier for Honda GX Clones \u0026 More","description":"\u003cdiv\u003e\n  \u003ch2\u003eOverview\u003c\/h2\u003e\n  \u003cp\u003eThe YAMAKATO 5–8 kW AVR Generator Voltage Regulator Rectifier is designed to help your portable power setup maintain a steady, dependable output across a variety of engine platforms. Built for practical retrofit, this AVR targets the parts of your genset that influence voltage consistency during load changes, startup surges, and uneven fuel delivery.\u003c\/p\u003e\n  \u003ch3\u003eReal-world use\u003c\/h3\u003e\n  \u003cp\u003eImagine a weekend project with a Honda GX-clone generator powering lights, tools, and a fridge. The AVR helps keep the voltage more stable as demand grows or when the engine revs up, reducing flicker and fluctuations that can affect sensitive equipment.\u003c\/p\u003e\n  \u003cp\u003eEngineered for versatility, it fits generators in the 5 kW to 8 kW range and supports a long list of brands and clones, including Predator, Champion, Firman, Powermate, Duromax, Lifan, ETQ, Wen, Westinghouse, and Generac-enabled models.\u003c\/p\u003e\n\n  \u003ch3\u003eKey advantages\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eBroad compatibility with Honda engines and GX clone variants, expanding retrofit options.\u003c\/li\u003e\n    \u003cli\u003eOEM standard carbon brush included, designed for reliable, consistent operation.\u003c\/li\u003e\n    \u003cli\u003eAluminum shell offers durability and heat dissipation for all-weather use.\u003c\/li\u003e\n    \u003cli\u003eCooper adjustment screw allows precise fit to your generator’s voltage profile.\u003c\/li\u003e\n    \u003cli\u003eRectangular and half-moon shell variants are supported, making retrofits easier.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhat to check before you order\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eCompare mounting hole size and pattern with your stock AVR to confirm a proper fit.\u003c\/li\u003e\n    \u003cli\u003eConfirm the physical shape of your existing AVR (rectangular or half-moon) if you’re replacing an old unit.\u003c\/li\u003e\n    \u003cli\u003eDon’t rely solely on KVA numbers; verify the actual mounting and connection compatibility with your generator.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003eNote: The description emphasizes possibilities and real-world scenarios. Individual results may vary based on the generator model and operating conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What generators is the YAMAKATO AVR compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Honda and GX-clone engines in the 5–8 kW range, including Predator, Champion, Firman, Powermate, and Duromax; please verify mounting hole size before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes with the AVR package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Includes an OEM carbon brush and a standard housing; check stock units for shape compatibility (rectangular or half-moon) before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43979722850438,"sku":"B09MJ785FJ","price":30.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-avr-5kw-rectifier-honda-clone-front.jpg?v=1778671102"},{"product_id":"yamakato-carburetor-for-honda-gx270-gx240-gx-clone-engines-predator-301cc-generac-6454","title":"YAMAKATO Carburetor for Honda GX270 GX240 \u0026 GX Clone Engines | Predator 301cc, Generac 6454","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe YAMAKATO carburetor is engineered to replace and fit a wide range of small 4-stroke engines. It suits Honda GX270 and GX240 families, as well as GX-clone variants aligned with Predator, Generac, Champion, Raven, and Duromax models. With displacements typically in the 274cc to 301cc class and engines around 8–9 horsepower, this carburetor is designed for straightforward installation and dependable air–fuel delivery across varying operating conditions. It serves as a practical replacement option for equipment like go-karts, pressure washers, log splitters, and more, helping you get back to work with minimal downtime.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x carburetor\u003c\/li\u003e\n  \u003cli\u003e1x mounting gasket set\u003c\/li\u003e\n  \u003cli\u003e1x fuel hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCarburetor body size: 21mm with 52mm center-to-center mounting holes\u003c\/li\u003e\n  \u003cli\u003eOEM-standard parts designed for GX clone engines and Honda GX motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePractical applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMini bikes and go-karts requiring reliable throttle response\u003c\/li\u003e\n  \u003cli\u003eWater or trash pumps, snow blowers, and log splitters needing steady fuel supply\u003c\/li\u003e\n  \u003cli\u003ePower pressure washers and air compressors where easy maintenance matters\u003c\/li\u003e\n  \u003cli\u003eTillers and other small engines that benefit from a straightforward carburetor replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation tips\u003c\/h3\u003e\n\u003cp\u003ePrepare a clean workspace, verify mounting hole alignment with the engine, and use the included gaskets to ensure a proper seal. Route the fuel hose securely and check for any signs of wear in the fuel line or fittings before operating the equipment.\u003c\/p\u003e\n\n\u003ch3\u003eWhy choose YAMAKATO\u003c\/h3\u003e\n\u003cp\u003eThis carburetor offers a practical, OEM-aligned option for common GX-series and GX-clone engines. Its compact design and matched mounting pattern help streamline replacements, while the included kit provides essential parts for a ready-to-install upgrade. Consider this model if you’re seeking a reliable, field-proven replacement that covers a broad range of everyday equipment and tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What engines is this YAMAKATO carburetor compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with Honda GX270 and GX240, plus GX clone engines from Predator, Generac, Champion, Raven, and Duromax.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes the carburetor, mounting gaskets, and a fuel hose for easy installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43979890589830,"sku":"B0BYMN4FDT","price":42.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-carburetor-honda-gx270-front-view.jpg?v=1778676358"},{"product_id":"yamakato-huayi-p16d-1-inverter-carburetor-with-stepper-motor-for-predator-2000-1600-and-ipower-sua2000i-sua2300i","title":"YAMAKATO Huayi P16D-1 Inverter Carburetor with Stepper Motor for Predator 2000\/1600 and iPower SUA2000i SUA2300i","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe YAMAKATO Huayi P16D-1 Inverter Carburetor kit is a purpose-built replacement designed to restore precise fuel metering in select inverter generators. Built around an OEM-grade 16mm carburetor with a five-wire step motor, this assembly emphasizes smooth throttle response and dependable operation without making promises about results.\u003c\/p\u003e\u003ch3\u003eCompatibility at a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for Predator 2000\/1600 inverter models (79cc, 3hp) and common variants in the 62523 family\u003c\/li\u003e\n\u003cli\u003eCompatible with ipower SUA2000i and SUA2300i units\u003c\/li\u003e\n\u003cli\u003eNote: Some Predator 2000 models use two different stepper motor types; please verify your original carburetor’s plug and motor configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel lines\u003c\/li\u003e\n\u003cli\u003eNon-asbestos mounting gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey features and real‑world use\u003c\/h3\u003e\u003cp\u003eThe kit combines OEM-grade components with a five-wire step motor to enable controlled metering and steady idle behavior. While it does not guarantee performance, users may experience improved compatibility and consistent fuel delivery when servicing compatible inverter generators.\u003c\/p\u003e\u003cp\u003eReal-world use scenarios include restoring reliable startup in field conditions, maintaining steady power delivery for weekend camping, or keeping a backup generator ready for unexpected outages. The included fuel lines and non-asbestos gaskets are designed to form secure connections and durable seals during heat cycles and vibration.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eBefore installing, inspect the motor plug on your carburetor to confirm the correct motor type. If your original part differs, select the matching variant to help ensure a proper fit and optimal alignment with existing fuel lines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What generators is the YAMAKATO Huayi P16D-1 carburetor kit compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with Predator 2000\/1600 inverter models and ipower SUA2000i\/SUA2300i; verify your original carb plug for a proper fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What does the kit include?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes the P16D-1 carburetor, fuel lines, and non-asbestos mounting gaskets for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43979895177350,"sku":"B0BZ3YPFWN","price":44.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-huayi-p16d-1-inverter-carburetor-predator-2000-assembly.jpg?v=1778676500"},{"product_id":"yamakato-huayi-oem-carburetor-kit-for-powersmart-21-inch-170cc-db2321sr-mb8602s-tune-up-kit","title":"YAMAKATO Huayi OEM Carburetor Kit for PowerSmart 21-inch 170cc DB2321SR MB8602S – Tune Up Kit","description":"\u003ch3\u003ePremium OEM-Quality Carburetor Replacement for PowerSmart 21-inch Mowers\u003c\/h3\u003e\n\u003cp\u003eThe YAMAKATO Huayi OEM Carburetor kit is designed to revitalize your PowerSmart 21-inch mower with a 170cc engine, models DB2321SR MB8602S. This replacement unit carries the Huayi P18 carburetor and comes with a gasket set and fuel tube, all selected to deliver performance that mirrors the original manufacturer standards.\u003c\/p\u003e\n\u003cp\u003eCarefully packaged as a complete tune-up solution, this kit is built to support dependable operation across typical yard work, from quick weekend sessions to longer mowing days. The included parts are chosen to fit PowerSmart 170cc 21-inch mowers and are intended to provide a straightforward swap for a smoother, more consistent fuel delivery.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included and What It Delivers\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Huayi OEM carburetor assembly (model P18) for PowerSmart DB2321SR MB8602S\u003c\/li\u003e\n  \u003cli\u003e1 x Gasket set to seal the carburetor against air leaks\u003c\/li\u003e\n  \u003cli\u003e1 x Fuel tube to ensure reliable fuel flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM-Quality Build\u003c\/strong\u003e: The carburetor and fuel line components are designed to meet or exceed original specifications for steady performance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable Materials\u003c\/strong\u003e: The double-layered fuel line adds resilience against fuel exposure and wear.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e: Specifically tuned for PowerSmart 170cc, 21-inch models like DB2321SR and MB8602S.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDIY-Friendly\u003c\/strong\u003e: A straightforward swap helps you restore mower reliability without specialized tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Home Mower Owners Choose This Kit\u003c\/h3\u003e\n\u003cp\u003eMany yard-care tasks rely on a reliable mower, and a well-tuned carburetor can influence starting, idle quality, and fuel delivery. While outcomes vary by mower condition and usage, this kit provides components designed to help maintain stable performance, smooth operation, and better throttle response. It’s an option for those seeking to refresh a worn or underperforming carburetor with parts that align with the original design.\u003c\/p\u003e\n\n\u003ch3\u003eReal-World Use Cases\u003c\/h3\u003e\n\u003cp\u003eImagine pulling the starter cord on a bright Saturday morning and enjoying a clean, steady engine run as you edge a flower bed or mow a hilly section. The included gasket set and fuel tube support a complete tune-up process, while the OEM-quality Huayi carburetor aims to deliver consistent fuel metering during longer mowing sessions. For DIY enthusiasts, it’s a practical upgrade when restoring performance on PowerSmart 170cc 21-inch mowers.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and Fitment Notes\u003c\/h3\u003e\n\u003cp\u003eDesigned for compatibility with PowerSmart DB2321SR MB8602S 21-inch mowers with a 170cc engine, this kit fits typical tune-up scenarios. Follow standard replacement steps aligned with your mower’s service manual, and use the gasket and fuel tube for a secure, fuel-tight seal. As with any carburetor replacement, ensure the fuel system is de-pressurized before disassembly and reassembly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the YAMAKATO Huayi OEM Carburetor kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes 1 carburetor, 1 gasket set, and 1 fuel tube for PowerSmart 170cc 21-inch mowers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor compatible with my PowerSmart DB2321SR MB8602S lawn mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits PowerSmart 170cc 21-inch models, matching OEM specs for DB2321SR MB8602S.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43979974180998,"sku":"B0DNHQ67QS","price":42.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-huayi-oem-carburetor-front-view.jpg?v=1778680541"},{"product_id":"yamakato-huayi-p27-carburetor-kit-for-honda-gx390-gx340-clones-16100-zf6-v01","title":"YAMAKATO Huayi P27 Carburetor Kit for Honda GX390\/GX340 \u0026 Clones (16100-ZF6-V01)","description":"\u003cdiv\u003e\n  \u003ch2\u003eOverview\u003c\/h2\u003e\n  \u003cp\u003eThe YAMAKATO Huayi P27 Carburetor Kit is engineered to fit a broad range of small engines from Honda and popular clone brands. This 27mm carburetor features a built‑in fuel tap, a generous 30.5mm air intake, and 52mm center‑to‑center mounting holes to support straightforward installation on compatible units. The kit is designed as a practical upgrade or replacement that aligns with common OEM references.\u003c\/p\u003e\n  \u003ch3\u003eWhat’s included\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eHuayi P27 carburetor\u003c\/li\u003e\n    \u003cli\u003eThree mounting gaskets for a secure seal\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eKey compatibility and fit\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eCompatible with Honda GX340 and GX390, as well as clone engines in the 188F\/190F and similar 420cc class\u003c\/li\u003e\n    \u003cli\u003eSupports brands like Predator, Champion, Ducar, Duromax, Lifan, Tool Tuff, Harbor Freight, and more\u003c\/li\u003e\n    \u003cli\u003eAligned with OEM standards for a straightforward replacement\u003c\/li\u003e\n    \u003cli\u003eRelated references include 16100-ZF6-V01, 16100-ZH9-W21, 16100-ZE2-W71\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003ePractical uses\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eSuitable for pressure washers, snow blowers, tillers, and other small engines requiring carburetor replacement\u003c\/li\u003e\n    \u003cli\u003eWorks well for mini bikes and compact machines where a compact, reliable carburetor matters\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eNotes and guidance\u003c\/h3\u003e\n  \u003cp\u003eBefore purchasing, please verify your engine size and review the pictured component. This kit is not intended for generators and ships brand‑new in box.\u003c\/p\u003e\n  \u003ch3\u003eWhy choose YAMAKATO\u003c\/h3\u003e\n  \u003cp\u003eDesigned to pair with Huayi components, this P27 kit offers a practical path for maintenance and replacement on compatible engines, with a focus on reliable fuel delivery and a fit that matches common OEM specifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which engines is the YAMAKATO Huayi P27 Carburetor Kit compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Honda GX340\/GX390 and clone engines, including 188F\/190F and Predator 420cc. Verify your engine size and the product pictures before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included in the kit and what should I check before buying?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Includes the Huayi P27 carburetor and 3 mounting gaskets. Confirm size\/pictures; not designed for generators.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43980478414982,"sku":"B09MJ94PB1","price":38.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-huayi-p27-carburetor-kit-box.jpg?v=1778687490"},{"product_id":"yamakato-pull-start-assembly-for-kohler-3000-series-engines-sh265-sh270-sh255-kh-18-165-05-s-recoil-starter-cord-kit","title":"YAMAKATO Pull Start Assembly for Kohler 3000 Series Engines SH265 SH270 SH255 (KH-18-165-05-S) – Recoil Starter Cord Kit","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eRefresh or replace the pull start on Kohler 3000 series engines with the YAMAKATO Pull Start Assembly. This kit centers a robust recoil housing in a sleek black finish, paired with an iron pawl plate and an OEM nylon 66 pull rope. Built to handle regular outdoor use, it delivers a compact, dependable starting system that restores a familiar, smooth pull experience.\u003c\/p\u003e\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 recoil pull starter\u003c\/li\u003e\n  \u003cli\u003e1 pull rope\u003c\/li\u003e\n  \u003cli\u003emounting nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEngine compatibility: Kohler 6.5hp small engines SH 255\/265\/270; part# 18-165-05-S\u003c\/li\u003e\n  \u003cli\u003eRachet diameter: 54mm; housing diameter: 75mm\u003c\/li\u003e\n  \u003cli\u003eBolt hole centers: 139mm triangle pattern; 159mm hole-to-hole spacing\u003c\/li\u003e\n  \u003cli\u003eColor and materials: black housing, iron pawl plate, OEM nylon 66 pull rope\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment and Versatility\u003c\/h2\u003e\n\u003cp\u003eNot compatible with GX-series engines or clones, even if mounting holes look similar. The pattern aligns with Kohler 3000 series starts and can suit a range of equipment that uses similar engines, including generator sets, snow blowers, water pumps, pressure washers, and air compressors from brands such as Cub Cadet, MTD, and Troy-Bilt.\u003c\/p\u003e\n\u003ch2\u003eReal-World Use and Benefits\u003c\/h2\u003e\n\u003cp\u003eReplacing a worn or difficult start with this kit can lead to quicker, more reliable starts and a more consistent pull feel. Its compact form minimizes bulk on crowded engines, while the included nuts support a straightforward installation for DIY repairs or professional service alike. Consider its durable components as a practical upgrade for routine maintenance and everyday outdoor use.\u003c\/p\u003e\n\u003ch2\u003eWhat You Should Know\u003c\/h2\u003e\n\u003cp\u003eWhile designed for Kohler 3000 series, verify the bolt pattern before ordering to ensure a precise match with your engine and mounting configuration. This kit ships new and ready for installation, featuring parts chosen to complement existing components for a smooth return to operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this pull start assembly compatible with Kohler 3000 series engines SH255\/SH265\/SH270?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s designed for Kohler 6.5hp SH255\/SH265\/SH270 engines with part 18-165-05-S and matches Kohler 3000 series starts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included in the package and are mounting hardware parts included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes one recoil starter, one pull rope, and mounting nuts for immediate installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43980504268934,"sku":"B0BTYP9D32","price":38.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakat-pull-start-kohler-3000-recoil.jpg?v=1778688697"},{"product_id":"yamakato-huayi-p28-h-4-dual-fuel-generator-carburetor-champion-gx-clone-replacement","title":"YAMAKATO Huayi P28-H-4 Dual Fuel Generator Carburetor | Champion GX Clone Replacement","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eDiscover the YAMAKATO Huayi P28-H-4 dual fuel generator carburetor, a thoughtfully engineered replacement part designed to fit a range of Champion and GX-clone engines. This 28mm carburetor supports gasoline and propane setups, offering flexibility when fuel availability changes. Built to align with the needs of Champion 439cc powerplants and select Honda-era replacements, it’s a practical option for keeping portable power steady and ready.\u003c\/p\u003e\n\u003cp\u003eParaphrased from the original specifications, the kit emphasizes straightforward installation and dependable fuel delivery. It’s crafted to be compatible with several Champion models and is positioned as an OEM-standard part for GX clone engines, providing a reliable alternative to original components without requiring a full system swap.\u003c\/p\u003e\n\u003ch3\u003eWhat’s included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x carburetor\u003c\/li\u003e\n  \u003cli\u003e1x mounting gasket\u003c\/li\u003e\n  \u003cli\u003e1x fuel hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey specs and compatibility\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCarb size: 28mm with 52mm center-to-center mounting holes\u003c\/li\u003e\n  \u003cli\u003eReplacement part for Champion generators and GX clone engines\u003c\/li\u003e\n  \u003cli\u003eCompatible with Honda generators as an OEM-style substitute\u003c\/li\u003e\n  \u003cli\u003eDual fuel capability supports gasoline and propane configurations\u003c\/li\u003e\n  \u003cli\u003eFits Champion models including 100419, 100296, 100230, 100165, 100153, 100155, 71530, and 71531M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy this matters in daily use\u003c\/h3\u003e\n\u003cp\u003eHaving a ready-to-install carburetor can reduce downtime when fuel quality or supply shifts. The P28-H-4’s compact 28mm size and standardized mounting pattern make it easier to swap in a pinch, helping you maintain steady operation for longer periods between refuels. While results may vary by setup, users often notice smoother throttle response and consistent fuel metering when paired with the right fuel hose and gasket.\u003c\/p\u003e\n\u003ch3\u003eInstallation and care tips\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify compatibility with your Champion model or GX clone engine before installation\u003c\/li\u003e\n  \u003cli\u003eInspect the gasket seating surface and replace the mounting seal to prevent leaks\u003c\/li\u003e\n  \u003cli\u003eAttach the included fuel hose securely and avoid kinking for steady fuel flow\u003c\/li\u003e\n  \u003cli\u003eFollow standard safety practices when handling gasoline or propane configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReal-world use cases\u003c\/h3\u003e\n\u003cp\u003eWhether you’re topping up a portable power station for camping, ensuring a backup generator runs through peak season, or maintaining a mobile workshop, this carburetor offers a practical upgrade path. Its dual fuel capability allows for flexibility when fuel sources change, while the kit’s compact footprint keeps installation neat and unobtrusive. Consider it a measured option for keeping your generator ready for routine chores or emergency power needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What generators is the YAMAKATO Huayi P28-H-4 carburetor compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Suitable for Champion models and GX-clone engines; also applicable as a replacement part for Honda generators.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What does the carburetor kit include?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Includes 1x carburetor, mounting gasket, and 1x fuel hose for quick installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43982192443526,"sku":"B0BX31J6DR","price":50.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-huayi-p28-h-4-carburetor-front-view.jpg?v=1778745906"},{"product_id":"yamakato-recoil-starter-assembly-for-honda-gx340-gx390-gx610-gx620-clone-engines","title":"YAMAKATO Recoil Starter Assembly for Honda GX340 GX390 GX610 GX620 \u0026 Clone Engines","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eMeet the YAMAKATO Recoil Starter Assembly, a versatile replacement designed to restore dependable starting for a range of small engines. Compatible with Honda GX340, GX390, GX610, GX620 and many clone models, this kit supports engines with bore sizes from 82 mm to 92 mm and covers a displacement spectrum from roughly 337 cc to 459 cc.\u003c\/p\u003e\n\u003cp\u003eIn practice, this two piece set is crafted to be a practical upgrade for seasonal use and workshop refreshes. Replacement part numbers include 28400-ZE3-W01ZP, 28400-ZE3-W01ZA, 28400-ZE3-W02ZP, and 28400-ZE3-W01ZB among others, offering a straightforward fit path for familiar engines.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility at a glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEngines: Honda GX340, GX390, GX610, GX620; plus popular clone models from Predator, Champion, Duromax and others.\u003c\/li\u003e\n  \u003cli\u003eBore options: 82–92 mm for a wide range of small to mid displacement units.\u003c\/li\u003e\n  \u003cli\u003eDisplacement range: approximately 337 cc to 459 cc, with variants that mirror certain Chinese models (182\/188\/190\/192 bores).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is included\u003c\/h3\u003e\n\u003cp\u003e2-piece pull-start assembly per set makes it convenient to outfit more than one machine or stock extra units for business needs. This setup is described as a two unit package, suitable for workshops or small scale purchases.\u003c\/p\u003e\n\n\u003ch3\u003eApplications and practical benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOutdoor power equipment such as tillers, log splitters, wood chippers, snow blowers, and trash water pumps can benefit from a ready replacement that aims for reliable starts and smooth cord action.\u003c\/li\u003e\n  \u003cli\u003eOther common equipment like power washers, mini bikes, go karts and air compressors may also benefit from a tested recoil starter that covers a broad engine family.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose YAMAKATO\u003c\/h3\u003e\n\u003cp\u003eYAMAKATO emphasizes cross brand compatibility and durable replacement parts that are easy to source. Clear part numbers and documented engine range help technicians and hobbyists alike keep essential equipment in service with confidence.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDesigned for straightforward replacement, this kit aligns with the engine model and bore size you select. Verify the model and bore size before installation to ensure a smooth swap and reliable engagement with the flywheel.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What engines is the YAMAKATO Recoil Starter compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Honda GX340\/GX390\/GX610\/GX620 and many clone engines; check bore size and model to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this product sold as a set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it ships as a 2-piece starter set for use on multiple machines.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43982656831622,"sku":"B0BZC6J31V","price":50.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-recoil-starter-honda-gx340-gx390-assembly.jpg?v=1778763167"},{"product_id":"yamakato-spark-plugs-for-champion-rc12yc-ngk-bcpr5es-briggs-stratton-491055s-2-pack-teflon-tape","title":"YAMAKATO Spark Plugs for Champion RC12YC, NGK BCPR5ES, Briggs \u0026 Stratton 491055S – 2-Pack + Teflon Tape","description":"\u003cdiv\u003e\n  \u003cp\u003eYAMAKATO Spark Plugs are designed as clean, reliable replacements for popular small‑engine ignition systems. This 2‑pack targets three widely used models—NGK BCPR5ES (6130), Champion RC12YC, and Briggs \u0026amp; Stratton 491055S—offering a straightforward swap that may support smoother starts and steadier idle in everyday use. The package also includes a bonus roll of teflon tape to help with a tidy, seal-friendly installation.\u003c\/p\u003e\n  \u003ch3\u003eCompatibility at a glance\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eReplaces NGK BCPR5ES (6130) for compatible engines\u003c\/li\u003e\n    \u003cli\u003eReplaces Champion RC12YC for common small machines\u003c\/li\u003e\n    \u003cli\u003eReplaces Briggs \u0026amp; Stratton 491055S for select tools and generators\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eConstruction, specs, and performance notes\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eCore material: Copper for efficient heat transfer\u003c\/li\u003e\n    \u003cli\u003eThread size: M14x1.25mm\u003c\/li\u003e\n    \u003cli\u003eThread reach: 19mm, ensuring proper seating\u003c\/li\u003e\n    \u003cli\u003eHex size: 16mm for easy tightening with standard tools\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eWhat’s included\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e2 × K5RTC spark plugs\u003c\/li\u003e\n    \u003cli\u003eBonus teflon tape for installation\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eReal‑world use and installation tips\u003c\/h3\u003e\n  \u003cp\u003eThese plugs are designed to fit in place of the specified models, offering a straightforward swap for many small engines such as lawn equipment, generators, and other tools. You may notice easier starts and steadier idle in everyday scenarios. For installation, hand‑tighten before finishing with a wrench to avoid cross‑threading, then check seating with a proper torque if your tool recommends one.\u003c\/p\u003e\n  \u003cp\u003eNote that performance gains depend on the engine’s overall condition and vintage. While the goal is a reliable ignition replacement, results can vary based on wear, fuel quality, and maintenance history. Consider these plugs as part of a regular tune‑up ethos rather than a guaranteed improvement.\u003c\/p\u003e\n  \u003ch3\u003eWhy choose YAMAKATO\u003c\/h3\u003e\n  \u003cp\u003eYAMAKATO focuses on practical, compatible replacements that align with OEM specifications. The copper core and precise dimensions are designed to support familiar engine layouts while offering a straightforward install experience for DIY enthusiasts and professionals alike.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which engines do YAMAKATO Spark Plugs fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They replace NGK BCPR5ES, Champion RC12YC, and Briggs \u0026amp; Stratton 491055S in compatible small engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Two K5RTC spark plugs with a bonus teflon tape for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43987073990790,"sku":"B0BP6YSXCK","price":12.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-spark-plug-champion-rc12yc.jpg?v=1778833755"},{"product_id":"yamakato-gcv160-carburetor-gasket-set-kit-for-honda-engines-gc135-gc160-gcv-series","title":"YAMAKATO GCV160 Carburetor Gasket Set Kit for Honda Engines | GC135\/GC160 \u0026 GCV Series","description":"\u003cp\u003eMaintenance of small engines often hinges on a dependable carburetor seal. The YAMAKATO GCV160 Carburetor Gasket Set Kit is designed to fit a broad range of Honda engines, including GC135, GC160, GC160A, GC160LA, GC190A, and the GCV135\/GCV160 families, as well as engines used by Cub Cadet, Lawn Boy, Craftsman, and MTD. This kit aims to make routine servicing easier and more reliable without requiring surgeries or special tools.\u003c\/p\u003e\n\u003cp\u003eWhat makes this gasket kit a practical choice for DIY enthusiasts and small-shop mechanics is its emphasis on durable, OEM-style sealing surfaces and non asbestos gasket materials. The kit ships in a compact, six-pack arrangement of carb mounting gaskets, neatly packaged in plastic bags for easy inventory and replacement planning. It is designed to support standard maintenance sessions, from seasonal tune-ups to mid-season rebuilds, providing a straightforward path to restoring original-engine feel and performance.\u003c\/p\u003e\n\u003cp\u003eKey inclusions and compatibility details help you decide if this set meets your needs. Your purchase covers gaskets that align with common Honda GC135, GC160 series, and GCV variants, and it extends to engines from brands like Cub Cadet, Lawn Boy, Craftsman, and MTD that share similar carburetor layouts. The set is described as non asbestos and OEM-standard, reinforcing a focus on safe handling and proper fit during service. The packaging includes six complete sets of carb mounting gaskets, giving you a ready supply for multiple replacements or for stocking your workshop with reliable spares.\u003c\/p\u003e\n\u003ch3\u003eWhat’s included and how it helps\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo carburetor gaskets per kit, providing dual-seal points for stable operation\u003c\/li\u003e\n  \u003cli\u003eOne choke-side gasket, designed to align with choke-side passages for consistent starts\u003c\/li\u003e\n  \u003cli\u003eOne insulator gasket to ensure proper spacing and heat isolation\u003c\/li\u003e\n  \u003cli\u003eSix sets packaged in plastic bags for organized replacement cycles\u003c\/li\u003e\n  \u003cli\u003eOEM-standard non asbestos material aimed at safe handling and long-lasting seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility and usage tips\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Honda GC135, GC160, GC160A\/GC160LA, GC190A and GCV135\/GCV160 families\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with select Cub Cadet, Lawn Boy, Craftsman, and MTD engines that use similar carb gasket configurations\u003c\/li\u003e\n  \u003cli\u003eBefore ordering, verify your engine model and cross-check part numbers to ensure a proper match\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are planning a maintenance project, this gasket set offers a clear path to re-sealing the carburetor without guesswork. While not guaranteeing specific performance outcomes, users may experience smoother starts, steadier idling, and more consistent fuel delivery when seals are in good condition. Use as part of a careful servicing routine, following standard safety practices and engine manufacturer guidelines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which engines does this gasket set fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Honda GC135\/GC160 family and GCV variants, plus select Cub Cadet and Lawn Boy engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What exactly is included and how is it packaged?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each kit includes two carb gaskets, one choke-side gasket, and one insulator gasket; six sets are packaged in plastic bags.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43987143196806,"sku":"B09GB4NLY5","price":12.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-gcv160-carb-gasket-set-kit.jpg?v=1778834935"},{"product_id":"yamakato-698369-oem-air-filter-3-pack-for-briggs-stratton-3-5-hp-engines","title":"YAMAKATO 698369 OEM Air Filter 3-Pack for Briggs \u0026 Stratton 3-5 HP Engines","description":"\u003ch2\u003ePremium filtration for Briggs \u0026amp; Stratton engines\u003c\/h2\u003e\n\u003cp\u003eThe YAMAKATO 698369 air filter is designed to align with OEM density specifications, delivering dependable airflow for outdoor power equipment. The durable sponge foam stands up to routine mowing and seasonal maintenance, helping your mower breathe clean air even when dust and debris are present. This is a three-pack, making it convenient to stock up for regular service without interrupting your lawn care routine.\u003c\/p\u003e\n\u003cp\u003eIn real-world use, a well-matched filter can contribute to smoother starts, steady idle, and consistent performance across common mowing tasks. While results can vary by engine condition and operating environment, this filter is built to support reliable air intake in Briggs \u0026amp; Stratton units within the listed ranges.\u003c\/p\u003e\n\u003ch3\u003eWhat makes this filter a practical choice\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable \u0026amp; High-Quality Materials:\u003c\/strong\u003e Precise sponge foam matched to OEM density specs for enduring filtration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExact Measurements:\u003c\/strong\u003e Filtration medium measures 5-1\/8\" L x 2-7\/8\" W x 1-1\/4\" H for a snug, seal-friendly fit.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenerous Pack:\u003c\/strong\u003e Includes 3x 698369 Air Cleaner, ready for multiple maintenance cycles.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility at a glance:\u003c\/strong\u003e Aligns with 698369 and related models such as 4216, 30-919, 5086K, 5088, 5099, MTD 490-200-0011, Craftsman SPA8S1062853001.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use and maintain\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBefore you buy:\u003c\/strong\u003e Confirm the model number to ensure the best fit and performance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAfter purchase:\u003c\/strong\u003e This is an aftermarket part; check warranty and CARB certification guidance with the engine manufacturer or a qualified professional before use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation tip:\u003c\/strong\u003e Inspect the old filter housing for debris and replace with the 698369 unit to restore air flow paths.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor shoppers seeking a practical, economical option that pairs compatible sizing with reliable materials, this YAMAKATO set offers a straightforward path to ongoing maintenance without compromising on fit or form.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this air filter compatible with Briggs \u0026amp; Stratton 698369 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits 698369 and related models listed in the description.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many filters are included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package contains three 698369 air filters.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43987304677510,"sku":"B0F66NH8T4","price":15.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamkato-698369-air-filter-assembly.jpg?v=1778838197"},{"product_id":"yamakato-spark-plug-f5rtc-cross-reference-ngk-bpr5es-denso-w16-champion-8405-3-pack","title":"YAMAKATO Spark Plug F5RTC — Cross-Reference NGK BPR5ES, Denso W16, Champion 8405 (3-Pack)","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eMeet the YAMAKATO Spark Plug F5RTC, engineered to align with OEM standards while offering broad cross-reference options for a wide range of small engines and lawn equipment. Its compact form and solid construction support reliable ignition in everyday use, from home maintenance to weekend projects. \u003c\/p\u003e\n\u003cp\u003eDesigned with practical dimensions in mind, this plug fits snugly where 14 mm thread diameter and a reach of 19 mm are specified, and a 13\/16 in. hex facilitates confident installation. The result is a sturdy seat in compatible cylinders, helping you achieve consistent starts and steady performance as conditions demand.\u003c\/p\u003e\n\u003ch3\u003eWide compatibility and cross-references\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCross-reference with NGK BPR5ES and Denso 5305\/IW16 3256\/J16CR-U 3013\/W14EXR-U 3021\/W16EPR-U 3031\/W16EXR-U to cover common lawn and garden engines.\u003c\/li\u003e\n  \u003cli\u003eCompatibility notes include Champion 322, 404, 8405, and related models, plus various OE equivalents.\u003c\/li\u003e\n  \u003cli\u003eTargets engines and equipment from brands like Kawasaki, Autolite, ACDelco, MTD, Cub Cadet, and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThree F5RTC spark plugs in each pack for routine replacements across multiple units.\u003c\/li\u003e\n  \u003cli\u003eFree Teflon tape included for cleaner sealant application during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReal-world use cases\u003c\/h3\u003e\n\u003cp\u003eIdeal for refreshing aging ignition systems on small lawn mowers, walk-behind models, and compact engines in a residential setting. Users may experience smoother starts and dependable ignition consistency when used as a replacement for listed OEM or cross-reference parts. While not a guarantee of performance, the plug is positioned to support reliable operation under typical mowing or yard care tasks.\u003c\/p\u003e\n\u003ch3\u003eWhy choose YAMAKATO\u003c\/h3\u003e\n\u003cp\u003eYAMAKATO aims to provide value with OEM-aligned dimensions and broad compatibility. This 3-pack offers a practical mix of cross-reference options plus a handy installation aid, all designed to help you maintain your equipment on schedule without overpaying for single-brand parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What engines and brands does the YAMAKATO F5RTC spark plug fit cross-reference?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It cross-references NGK BPR5ES, Denso W16 series, and Champion 8405 along with listed OEM numbers, broadening replacement options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the 3-pack and how does it help with installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Three F5RTC plugs are included, plus free Teflon tape for cleaner gasket sealing during basic maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43987400360070,"sku":"B0DKNMQJ53","price":15.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-spark-plug-f5rtc-cross-reference.jpg?v=1778840189"},{"product_id":"yamakato-0-095-2-4mm-196ft-pentagonal-trimmer-line-heavy-duty-universal-fit","title":"YAMAKATO 0.095 2.4mm 196ft Pentagonal Trimmer Line – Heavy Duty Universal Fit","description":"\u003ch2\u003ePremium YAMAKATO Pentagonal Trimmer Line 0.095 in \/ 2.4 mm, 196 ft\u003c\/h2\u003e\n\u003cp\u003eDesigned to breathe new life into your yard work, this YAMAKATO line blends a compact diameter with long reach. Each spool provides a robust 60 meters (196 feet ±2 ft) of line and weighs about a half pound, delivering ample material for extended trimming sessions without frequent reloading. The result is steadier feeding and predictable performance when you tackle lawn edges, small brush, or overgrown patches.\u003c\/p\u003e\n\u003cp\u003eThe line employs a sharp star (pentagonal) cut, which creates precise contact with grass and weeds. The geometry reduces drag and abrasion, helping the line slice through dense growth with less resistance. Expect smoother passes and cleaner cuts as you maneuver around tight corners, alongside noticeably reduced line wear during mid-season yard care.\u003c\/p\u003e\n\u003cp\u003eMade from a specialized nylon formulation, the line emphasizes toughness to stand up to rugged trimming tasks. While results depend on the job and equipment, the construction is aimed at delivering improved durability and reliable performance across typical yard setbacks—without bending or breaking at the worst moments.\u003c\/p\u003e\n\u003cp\u003eFor many tools in the field, this trimmer line is marketed as a universal replacement option. It’s built to work with a broad mix of brands and models, enabling you to keep a single spool on hand rather than stocking multiple sizes. The product also includes a bonus cutting tool to help you trim and prepare the line quickly when you’re ready to refresh your spool.\u003c\/p\u003e\n\u003ch3\u003eKey benefits at a glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDiameter and length: 0.095 in \/ 2.4 mm, 60 m (196 ft ±2 ft) per spool\u003c\/li\u003e\n  \u003cli\u003eStar cut geometry for sharper cuts and smoother operation\u003c\/li\u003e\n  \u003cli\u003eSpecial nylon formula for enhanced toughness and durability\u003c\/li\u003e\n  \u003cli\u003eIncludes a bonus line-cutting tool for quick setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUniversal fit and real-world use\u003c\/h3\u003e\n\u003cp\u003eThe line is designed to be compatible with many gas and electric trimmers, including popular brands across the market. This broad compatibility means you can pair it with equipment from Husqvarna, Ryobi, Echo, Stihl, Ego, Oregon, Weed Eater, Craftsman, Black \u0026amp; Decker, and others for a versatile yard maintenance solution. In practice, you may find it a convenient option when replacing worn lines between lawn-care sessions, especially when you want a straightforward refill without extra adapters.\u003c\/p\u003e\n\u003ch3\u003eWhat you get and how to use\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne 60 m (196 ft) spool of 0.095 in (2.4 mm) trimmer line\u003c\/li\u003e\n  \u003cli\u003eStar\/pentagonal cut for efficient cutting action\u003c\/li\u003e\n  \u003cli\u003eBonus cutting tool for fast line trimming and setup\u003c\/li\u003e\n  \u003cli\u003eApproximate weight: 1\/2 lb, designed for easy handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTip: Feed the line according to your trimmer head’s instructions, trim to the recommended length, and test with a low-speed pass before full use. Sensory cues like a smooth feed, minimal wobble, and clean edge results can indicate proper setup and performance potential.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is YAMAKATO pentagonal trimmer line compatible with my trimmer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for broad compatibility, it fits many major brands such as Husqvarna, Ryobi, Stihl, Ego, Oregon, Weed Eater, Craftsman, and Black \u0026amp; Decker.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included with the line package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A 60 m (196 ft) spool of 0.095 in (2.4 mm) pentagonal line plus a bonus line-cutting tool.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43987404292230,"sku":"B0GL6S8FM9","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-pentagonal-line-095-2-4mm-196ft-spool.jpg?v=1778840272"},{"product_id":"yamakato-predator-212-ct200u-gx160-pull-cord-rope-4mm-x-5-32in-with-handle","title":"YAMAKATO Predator 212 CT200u GX160 Pull Cord Rope — 4mm x 5\/32in with Handle","description":"\u003ch2\u003ePremium pull cord replacement for reliable starts\u003c\/h2\u003e\n\u003cp\u003eThe YAMAKATO Predator 212 CT200u GX160 Pull Cord Rope is designed to refresh your small engine starts with a durable, easy-to-handle cord. The rope measures 4 mm in diameter with a 5\/32 inch feel, pairing strength with a flexible pull that won’t snag during cold starts or busy days. Included is a starter handle for a comfortable grip, helping you pull smoothly when time matters.\u003c\/p\u003e\n\u003cp\u003eDurability and consistency sit at the heart of this replacement. The nylon 66 material is built to withstand repeated pulls, while the ends are hardened and tightened to promote a clean fit into a wide range of recoil starters. The result is a replacement that resists fraying and maintains reliable engagement, especially when used across a variety of applications from generators to tillers and equipment like pressure washers.\u003c\/p\u003e\n\u003ch3\u003eKey benefits at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBroad compatibility across Predator 212, Coleman ct200u, Honda GX engines, Champion generators, Generac GP series, and many clones\u003c\/li\u003e\n\u003cli\u003eDurable nylon 66 construction designed for heavy, repeated use in small engines, tillers, snow blowers, and more\u003c\/li\u003e\n\u003cli\u003eHardened rope ends and precise termination for easy installation into most recoil starters\u003c\/li\u003e\n\u003cli\u003ePack includes three cords and one starter handle in a compact bag for convenient replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat you get and how to use it is straightforward. The package contains three 4 mm pull cords and one starter handle. Color points on the rope may be present as part of the manufacturing process to help with identification. Before replacing, compare the recoil starter opening and end type to ensure a clean, secure fit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3 cords in 4 mm thickness plus 1 starter handle\u003c\/li\u003e\n\u003cli\u003eEnd finishes are hardened for easy installation\u003c\/li\u003e\n\u003cli\u003eSuitable for small engines as well as tillers, snow blowers, and pressure washers\u003c\/li\u003e\n\u003cli\u003eEngine recoil variants differ; check product images and dimensions to confirm fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReal-world usage ideas\u003c\/h3\u003e\n\u003cp\u003eImagine replacing a worn pull cord on a chilly morning so your tiller or generator starts with a confident, crisp pull. The combination of a solid cord and a comfortable handle also lends itself to quick swaps during busy maintenance days. While you cannot predict every outcome, this replacement emphasizes a smooth feel in hand and dependable engagement when you pull the starter.\u003c\/p\u003e\n\u003cp\u003eWith this YAMAKATO option, you gain a practical replacement that is compatible with common engine families and designed for straightforward installation. It offers a practical pathway to renewed performance without overpromising results. If you own equipment in the Predator, Coleman, Honda GX, or similar families, this cord is worth considering as a possible solution for routine upkeep.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e that recoil starter configurations vary by model. Refer to the product images and size details to verify compatibility with your specific engine before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What engines and machines is this pull cord compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with Predator 212 CT200u, Honda GX160\/GX200, Coleman, Champion generators, Generac GP series, and various clones; verify recoil starter specs before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the package and what should I inspect before installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Three 4mm cords and one starter handle are included; ends are hardened for easy installation. Check images and sizes to ensure a proper fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43988351647878,"sku":"B091Z1F8BM","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-predator-212-ct200u-pull-cord-rope.jpg?v=1778845778"},{"product_id":"yamakato-predator-6500-9000-generator-carbon-brush-assembly-oem-replacement","title":"YAMAKATO Predator 6500–9000 Generator Carbon Brush Assembly — OEM Replacement","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe YAMAKATO Predator generator carbon brush assembly is a dependable OEM-style replacement designed for a wide range of portable generators. It targets GX390, GX340 engines and clones with displacements around 389cc–459cc, offering a practical option when maintenance is due. The kit includes copper connecting terminals and a metal ring in the positive pole mounting hole, mirroring the construction you’d expect from established OEM parts. Part number 31106-ZB4-003 helps with model verification and ordering accuracy.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes it a practical choice\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide compatibility:\u003c\/strong\u003e fits Honda EU\/EM\/EB, Predator, Champion, Wen, Westinghouse, Coleman Powermate, ETQ, Blackmax, Duromax, Durostar, Lifan, Ryobi, Powerstroke, Powermax, All Power, Homelite, Sportsman, Husky and other 5kW generators.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReliable materials:\u003c\/strong\u003e copper terminals support efficient conductivity, with a metal ring in the positive pole mounting hole for secure engagement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtective packaging:\u003c\/strong\u003e supplied as a set of 2 in a paper box to protect brushes during transit and help manage replacement costs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClear dimensions:\u003c\/strong\u003e mounting hole diameter is 6 mm (about 1\/4 inch); center-to-center hole spacing is 26 mm (about 1 inch), aiding fit checks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImportant note:\u003c\/strong\u003e this carbon brush is larger than some 2 kW brushes but looks similar, so verify your model’s requirements before replacing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eReal-world use and installation ideas\u003c\/h3\u003e\n\u003cp\u003eFor routine generator maintenance, this kit provides a ready-to-install replacement that can help restore stable contact during operation. If you’re replacing worn brushes after a season of use or following a service interval, the two-brush setup supports a quick reassembly. The copper terminals and mounting geometry are designed to promote steady electrical contact, which may contribute to smoother output and reliable charging behavior in compatible units.\u003c\/p\u003e\n\n\u003ch3\u003eWhy choose YAMAKATO\u003c\/h3\u003e\n\u003cp\u003eYAMAKATO focuses on practical, OEM-like parts built to fit a broad spectrum of generators. This brush assembly reflects careful attention to materials and mounting geometry, offering a dependable option for maintenance and minor repairs. While results vary by model and operating conditions, many users appreciate a brand-backed replacement that aligns with their generator’s original design intent.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this brush assembly compatible with GX390 or GX340 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It covers GX390, GX340 and clones (389cc–459cc) with appropriate mounting and terminals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included and how should I install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Two carbon brushes with copper terminals and a metal ring, in a protective paper box; follow your manual for replacement steps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43988351615110,"sku":"B091Z2VW2S","price":12.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamkato-predator-brush-set-packaging.jpg?v=1778845783"},{"product_id":"yamakato-gx390-420cc-generator-pull-cord-kit-4-65-ft-rope-starter-grip-for-honda-gx340-gx610-predator-champion-more","title":"YAMAKATO GX390 420cc Generator Pull Cord Kit – 4.65 ft Rope + Starter Grip for Honda GX340\/GX610, Predator, Champion \u0026 More","description":"\u003ch2\u003ePremium pull cord kit for quick, reliable recoil starts\u003c\/h2\u003e\n\u003cp\u003eMeet the YAMAKATO GX390 pull cord kit, a robust replacement for recoil starters across a wide range of engines and generators. Crafted to withstand regular starts, this kit blends durable rope with a dependable starter grip, sourced from the engine manufacturer’s supply chain for confidence in fit and finish. It is designed to work with popular models including the Honda GX series and various Predator, Champion, and Generac units, among others. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey specifications\u003c\/strong\u003e: 4.5 mm rope diameter (3\/16 inch) and a total rope length of 4.65 ft. The kit is shipped as a 3-piece cord plus one starter grip. The rope ends are hardened and tightened to simplify installation in recoil starters, reducing setup time during maintenance or parts replacement. Expect a straightforward swap that restores normal pull action and starter feel.\u003c\/p\u003e\n\u003ch3\u003eWhat’s included and how it helps\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThree pieces of 4.5 mm rope, providing the replacement core for most recoil assemblies\u003c\/li\u003e\n  \u003cli\u003eOne starter grip for a secure, comfortable pull and reduced hand fatigue\u003c\/li\u003e\n  \u003cli\u003eHard-ended rope ends engineered for reliable anchoring inside the recoil housing\u003c\/li\u003e\n  \u003cli\u003ePlastic bag packaging that keeps components organized and protected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n  \u003cli\u003eColor points on the rope may vary, helping you visually align with existing cords on your unit\u003c\/li\u003e\n  \u003cli\u003eCompatibility across multiple brands (Honda, Predator, Generac, Champion, and more) supports a broad repair toolbox\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhy choose this kit? It’s designed to minimize downtime by offering a dependable, ready-to-install replacement that aligns with common rope diameters and lengths used on many generators and engines. While the kit does not guarantee a perfect match for every model, it provides a flexible option for numerous recoil systems that share the listed specifications.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eImportant note:\u003c\/em\u003e Please review the pull cord and handle images and sizes before purchase, as recoil starters may vary in details across models. This kit aims to cover a wide range of units, but confirming fit helps ensure a smooth replacement process.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What engines and generators is this pull cord kit compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with Honda GX series, Predator\/Champion generators, Generac, and more; verify rope length 4.65 ft and diameter 4.5 mm for your recoil starter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What does this kit include, and how long is the rope?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Three pieces of 4.5 mm rope and one starter grip; total cord length is 4.65 ft.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43988351713414,"sku":"B091Z2143J","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-gx390-pull-cord-kit.jpg?v=1778845778"},{"product_id":"yamakato-universal-generator-carbon-brush-assembly-7x-5-8-kw-for-honda-generac-predator-more","title":"YAMAKATO Universal Generator Carbon Brush Assembly (7x 5–8 kW) for Honda, Generac, Predator \u0026 More","description":"\u003cdiv\u003e\n  \u003cp\u003eThe YAMAKATO Universal Generator Carbon Brush Assembly is designed to refresh a broad range of portable and standby generators in the 5 to 8 kW range. It features copper connecting terminals and a metal ring on the positive pole mounting hole, delivering dependable electrical contact where it matters most. The kit references Part #31106-ZB4-003, making it easy to cross-check compatibility with your maintenance records.\u003c\/p\u003e\n  \u003ch3\u003eWhat you get\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eUniversal carbon brushes with copper connecting terminals and a metal ring on the positive pole mounting hole.\u003c\/li\u003e\n    \u003cli\u003eMounting hole diameter: 6 mm (about 1\/4 inch); center-to-center hole spacing: 26 mm (about 1 inch).\u003c\/li\u003e\n    \u003cli\u003eSeven high-quality brushes packaged in a protective paper box to cushion during shipping and help reduce service costs.\u003c\/li\u003e\n    \u003cli\u003eBrand-new, OEM-quality components designed to fit a wide range of generator brands and models.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eCompatibility and use cases\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eFits many popular brands, including Champion, Predator, Honda (EU\/EM\/EB), Wen, Westinghouse, Coleman Powermate, ETQ, Blackmax, Duromax, Durostar, Lifan, Ryobi, Powerstroke, Powermax, All Power, Homelite, Sportsman, Husky, and more.\u003c\/li\u003e\n    \u003cli\u003eSuitable for inverter and alternator configurations commonly found in 5–8 kW units, offering a practical replacement option when brushes wear or sparking appears.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eWhy choose YAMAKATO? The kit emphasizes broad compatibility, precise mounting dimensions, and protective packaging to minimize downtime. While results can vary with overall generator condition, this set provides a reliable path for routine maintenance and part replacement, helping you keep your power on hand when you need it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What generators is this carbon brush assembly compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This universal 7-pack fits many brands including Honda, Generac, Predator, Ryobi, Westinghouse, and more; check the mounting specs to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it come with packaging and is it OEM quality?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the set arrives in a paper box for protection and cost efficiency; it is described as OEM-quality for Honda clones.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43988382253190,"sku":"B09MTBYGKK","price":15.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamkato-generator-brush-assembly.jpg?v=1778846332"},{"product_id":"yamakato-9-64in-x-3-5mm-pull-cord-rope-for-honda-gcv160-190-2-3m-with-handle-grips-497680","title":"YAMAKATO 9\/64in x 3.5mm Pull Cord Rope for Honda GCV160\/190 – 2.3m with Handle Grips (497680)","description":"\u003ch2\u003eEnhanced Replacement Pull Cord Kit for Lawn Mowers and Small Engines\u003c\/h2\u003e\n\u003cp\u003eYAMAKATO delivers a durable pull cord kit designed to refresh recoil starters on a wide range of lawn care equipment and small engines. This lengthier, rugged cord is built for repeated pulls, offering a dependable option when a starter cord begins to show wear. The setup includes three cords and two starter handle grips, giving you a ready-to-install upgrade that can shorten downtime during yard work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat sets this kit apart:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurability tested for frequent use:\u003c\/strong\u003e engineered to withstand thousands of pulls and regular starting cycles, helping you keep engines primed for action.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterials designed for tough conditions:\u003c\/strong\u003e nylon 66 construction delivers strength and flexibility for a variety of recoil starters.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardened cord ends for easy installation:\u003c\/strong\u003e ends are prepared to slide smoothly into recoil spools and attachments, reducing fit time during replacement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVersatile compatibility:\u003c\/strong\u003e suitable for Honda GCV160\/190 series, HRX models, and many Briggs \u0026amp; Stratton, MTD, Toro, and Craftsman units; a practical choice for common yard machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree pull cords, each 2.3 meters long with a 3.5 mm (9\/64 inch) diameter\u003c\/li\u003e\n  \u003cli\u003eTwo starter handle grips for replacement use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to use and install\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBefore installing, compare the cord diameter and length to your existing recoil starter cord to confirm a match.\u003c\/li\u003e\n  \u003cli\u003eInspect the reel and spring housing for wear; replace worn components to maintain smooth operation.\u003c\/li\u003e\n  \u003cli\u003eFollow the manufacturer’s guidance for threading the cord through any pulleys or hooks, then test with a controlled pull to ensure proper retraction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith its blend of rugged construction and practical inclusions, this kit aims to reduce downtime and simplify maintenance for lawn care gear and select small engines. Consider it as a versatile option for reviving starting performance, while staying mindful that exact results can vary by model and usage. If you’re juggling replacements across multiple tools, this three-cord set with two grips provides a consolidated solution that can adapt to several compatible systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What engines is this pull cord compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Honda GCV160\/190 series and many Briggs \u0026amp; Stratton\/MTD\/Toro units; verify model and size before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Three 2.3 m cords, 3.5 mm diameter, plus two starter handle grips.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43988403290246,"sku":"B09YQ2G58T","price":10.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-pulling-cord-honda-gcv160.jpg?v=1778846769"},{"product_id":"yamakato-1-8in-40ft-pull-cord-starter-rope-3-0mm-recoil-string-for-chainsaws-2-cycle-tools","title":"YAMAKATO 1\/8in 40ft Pull Cord Starter Rope – 3.0mm Recoil String for Chainsaws \u0026 2-Cycle Tools","description":"\u003cp\u003eReplace worn recoil cords with confidence using the YAMAKATO 1\/8in x 40ft pull cord. Crafted from premium Nylon 66 and braided for strength, this cord resists wear through many starts and seasonal use. The 40 ft length provides flexibility across several small engines, letting you stock a single cord for multiple tools.\u003c\/p\u003e\n\u003cp\u003eThe rope features a specially processed end that threads through small holes smoothly, reducing frustration during installation. Two pull cord handle grips are included, delivering a comfortable, steady grip during pulls and simplifying field replacements.\u003c\/p\u003e\n\u003ch2\u003eVersatile compatibility for common tools\u003c\/h2\u003e\n\u003cp\u003eDesigned to fit a wide range of small engines, this cord supports brands such as Stihl, Echo, Greenworks, Ryobi, Oregon, Yamaha, Tecumseh, Husqvarna, Sears\/Craftsman, and Poulan 32cc–50cc models. It serves well as a replacement cord for chainsaws, leaf blowers, weed eaters, brush cutters, edge trimmers, and even compact walk-behind mowers.\u003c\/p\u003e\n\u003ch3\u003eKey benefits at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe 1\/8 in diameter rope with a specially processed end makes threading through tight openings easier.\u003c\/li\u003e\n\u003cli\u003eIncludes two handles for quick, comfortable starts.\u003c\/li\u003e\n\u003cli\u003e40 ft length covers multiple tools and keeps a spare on hand.\u003c\/li\u003e\n\u003cli\u003eNylon 66 braided construction delivers durability under frequent recoil use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuick compatibility at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWidely compatible with Stihl, Echo, Greenworks, Ryobi, Oregon, Yamaha, Tecumseh, Husqvarna, Sears\/Craftsman, Poulan 32cc–50cc.\u003c\/li\u003e\n\u003cli\u003eSuitable as a replacement cord for chainsaws, leaf blowers, weed eaters, brush cutters, edge trimmers, and small push mowers.\u003c\/li\u003e\n\u003cli\u003eDesigned to work with 2-stroke engine recoil starters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and installation tips\u003c\/h3\u003e\n\u003cp\u003eInspect the cord for fraying before installing. Follow the manufacturer guidance to thread the end through the recoil housing to minimize snagging. Store spare lengths in a cool, dry place when not in use.\u003c\/p\u003e\n\u003ch3\u003eReal-world scenarios\u003c\/h3\u003e\n\u003cp\u003eImagine swapping in this cord during a busy weekend project: a stubborn chainsaw starts smoothly after a quick install, a leaf blower regains power for autumn cleanup, and a weed eater returns to the trim line without delay. The included handles help maintain a steady pull when resisting a stiff spring.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What engines and brands is this pull cord compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s a universal 1\/8in cord (40 ft) that fits many small engines from Stihl, Echo, Husqvarna, Poulan, Sears\/Craftsman, Ryobi, and more.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the package and how is it installed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes the pull cord and two handles; installation is simplified by the end that threads smoothly through small holes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43988403355782,"sku":"B09YQ22FZ3","price":15.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakata-pull-cord-1-8in-40ft.jpg?v=1778846767"},{"product_id":"yamakato-gasket-material-non-asbestos-rtv-silicone-sealant-kit-3-oz-2-gasket-sheets-included","title":"YAMAKATO Gasket Material Non-Asbestos \u0026 RTV Silicone Sealant Kit (3 oz) – 2 Gasket Sheets Included","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe YAMAKATO Gasket Material Non-Asbestos and RTV Silicone Sealant Kit is a practical pairing designed for both DIY enthusiasts and professional projects. This kit combines a room-temperature vulcanizing (RTV) gasket maker with ready-to-cut gasket sheets, offering flexible sealing options for automotive components and around the home.\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the kit\u003c\/h3\u003e\n\u003cp\u003eThe gasket material component includes a Room Temperature Vulcanizing gasket maker, a nozzle\/jet applicator, and two non-asbestos gasket sheets. The silicone gasket maker is a versatile adhesive that bonds uneven surfaces while forming a waterproof seal. It resists shrinking and cracking and stands up to weathering, making it suitable for carburetors, valve covers, engines, motors, automotive accessories, and a range of household uses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo gasket sheet sizes: 1.2 x 160 x 290 mm and 0.8 x 160 x 290 mm, enabling a proper fit for different thickness needs.\u003c\/li\u003e\n  \u003cli\u003eSheets are tight, flexible, and dense, aiding precise cuts and snug fits on small or thin gaskets.\u003c\/li\u003e\n  \u003cli\u003eThe RTV gasket maker and gasket sheet material can be used independently or together, allowing flexible application choices.\u003c\/li\u003e\n  \u003cli\u003eDIY-friendly and built for reliable repairs, restoration projects, and long-lasting seals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey benefits at a glance\u003c\/h3\u003e\n\u003cp\u003eExpect waterproof seals, dependable weather resistance, and easy handling on a variety of substrates. The combined system supports sealing tasks across engines, machinery, and common household projects, with results that resist cracking and shrinking over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlexible performance on metals, plastics, and uneven surfaces.\u003c\/li\u003e\n  \u003cli\u003eWeather and heat resistance suitable for outdoor or garage environments.\u003c\/li\u003e\n  \u003cli\u003eTwo thickness options to tailor gasket fit precisely to your groove or gap.\u003c\/li\u003e\n  \u003cli\u003eIndependent or combined use provides adaptable tooling for different tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDIY tips and best practices\u003c\/h3\u003e\n\u003cp\u003ePrepare clean, dry surfaces, cut sheets to match mating surfaces, and apply sealant evenly. Allow curing as guided by the product, and assemble components carefully to minimize gaps. This kit invites hands-on sealing projects with confidence.\u003c\/p\u003e\n\u003ch3\u003ePractical scenarios\u003c\/h3\u003e\n\u003cp\u003eCarburetor and valve cover seals, engine compartment repairs, and other household sealing tasks can benefit from a waterproof, durable seal. Results vary by task, but the kit offers a practical option for re-sealing and extending component life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What exactly is included in the YAMAKATO gasket kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes a room-temperature vulcanizing gasket maker, a nozzle\/jet applicator, and two non-asbestos gasket sheets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What surfaces and uses is this gasket kit suited for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Ideal for carburetors, valve covers, engines, and various DIY repairs; provides waterproof seals and weather resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43988514144390,"sku":"B0CJ26HX1G","price":15.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-gasket-material-non-asbestos.jpg?v=1778848577"},{"product_id":"yamakato-recoil-starter-handle-with-5-0mm-x-16ft-pull-rope","title":"YAMAKATO Recoil Starter Handle with 5.0mm x 16ft Pull Rope","description":"\u003ch2\u003eYAMAKATO Recoil Starter Handle with 5.0mm x 16ft Pull Rope\u003c\/h2\u003e\n\u003cp\u003eWhen a small engine needs a fast, dependable start, a well made replacement can save time and effort. The YAMAKATO kit couples a contoured grip with a strong 5.0 mm rope to support reliable pulls and a smooth start, across a wide range of tools and brands. The setup is designed to fit many recoil systems, so you can get back to work without hunting for the right part.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed for longevity and ease of use. The pull rope features a robust inner core wrapped in an abrasion resistant outer sheath, while the handle is crafted from durable PP material for a secure, comfortable grip in varying conditions. You may notice the balance between a soft touch and tough performance that helps during early starts on chilly mornings or after storage.\u003c\/p\u003e\n\u003ch3\u003eWhat makes this a smart replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5 mm diameter pull rope delivers a sturdy, repeatable pull\u003c\/li\u003e\n  \u003cli\u003e5 meters long (16 ft) enables 2 to 3 rope replacements in many setups\u003c\/li\u003e\n  \u003cli\u003eContoured grip provides a secure, comfortable hold during starting\u003c\/li\u003e\n  \u003cli\u003eDouble layer rope with inner core and outer sheath boosts strength and wear resistance\u003c\/li\u003e\n  \u003cli\u003eBroad compatibility across many brands and equipment for edgers, mowers, snow blowers, generators, and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReal world uses\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for lawn care tools like edgers, mowers, and tillers requiring a pull cord replacement\u003c\/li\u003e\n  \u003cli\u003eUseful for generators, washers, minibikes, and small engines needing a reliable start\u003c\/li\u003e\n  \u003cli\u003eWell suited for seasonal equipment such as snow blowers that rely on a durable pull cord\u003c\/li\u003e\n  \u003cli\u003eEasy to install on compatible recoil systems with standard 5 mm cords\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis solution emphasizes practical, ready to install performance. Consider it a dependable option that may reduce downtime when a pull cord reaches the end of its life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which engines and equipment is the YAMAKATO Recoil Starter Handle compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with Honda, Predator, Champion, Kohler, Briggs \u0026amp; Stratton, Generac, Duromax, and more for mowers, snow blowers, generators, and small engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the key rope and handle features?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: 5.0 mm diameter, 16 ft length, double layer rope, and a comfortable PP grip for reliable pulls.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43988743815302,"sku":"B0FDQKXBBX","price":13.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-recoil-starter-handle-assembly.jpg?v=1778853501"},{"product_id":"yamakato-throttle-control-assembly-kit-for-honda-clones-gx160-gx200-and-predator-212","title":"YAMAKATO Throttle Control Assembly Kit for Honda Clones GX160 GX200 and Predator 212","description":"\u003ch2\u003eUpgrade your engine throttle with YAMAKATO\u003c\/h2\u003e\n\u003cp\u003eThe YAMAKATO throttle control assembly kit is crafted for Honda clone engines, including GX160, GX200, Predator 212, and related 159–224 cc families. This eight‑piece upgrade integrates a cohesive governor linkage with a sturdy lever arm and dependable return springs to deliver a smoother, more predictable throttle experience in everyday use.\u003c\/p\u003e\n\u003cp\u003eWhat you get when you open the package is a thoughtfully paired set of components designed to work together as a complete system. The kit includes a governor control base, a governor arm, two carburetor springs, two throttle return springs, and two governor rods—all selected to help you refresh worn parts in a single upgrade. Together, these parts aim to restore steadier idle, more consistent acceleration, and reliable throttle kickback as you move from low to high RPM ranges.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 governor control base\u003c\/li\u003e\n  \u003cli\u003e1 governor arm\u003c\/li\u003e\n  \u003cli\u003e2 carburetor springs\u003c\/li\u003e\n  \u003cli\u003e2 throttle return springs\u003c\/li\u003e\n  \u003cli\u003e2 governor rods\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey benefits and real‑world use cases\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCoordinated throttle action can contribute to a more stable idle and smoother transitions between RPM bands.\u003c\/li\u003e\n  \u003cli\u003eDurable lever and springs provide consistent actuation, helping to maintain predictable throttle response under load.\u003c\/li\u003e\n  \u003cli\u003eBroad compatibility covers a wide range of popular clone engines, including GX160, GX200, Predator, Lifan, and related models.\u003c\/li\u003e\n  \u003cli\u003eDIY friendly upgrade that suits small machines, go‑karts, lawn tools, and other carbureted applications where throttle control matters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePractical notes and installation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHot tip: For Mini Mike go‑karts and similar throttle upgrades, you may need a different throttle type. See B09WMLNW5Q for alternatives. Also, sizes shown in product images may vary by clone; springs and components can have small tolerances. If you’re upgrading an existing setup, compare part numbers and mounting points to ensure a clean fit.\u003c\/p\u003e\n\n\u003cp\u003eIn short, the YAMAKATO throttle control assembly aims to help you refresh aging linkage with a compact, eight‑piece kit that can fit a variety of common Honda clone engines. The result can feel more controlled and responsive in everyday use, without promising any guaranteed outcomes—just the potential for a smoother throttle experience when paired with compatible hardware.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What engines is this kit compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Honda clone engines like GX160, GX200, Predator 212, and similar 159–224 cc models; always check part numbers and mounting points before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes 1 governor control base, 1 governor arm, 2 carburetor springs, 2 throttle return springs, and 2 governor rods (8 pieces total).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43989209317510,"sku":"B091Z3M7RL","price":18.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-throttle-control-base.jpg?v=1778860046"},{"product_id":"yamakato-5mm-33ft-pull-cord-rope-recoil-starter-string-replacement-for-lawn-mower-generator-more","title":"YAMAKATO 5mm 33ft Pull Cord Rope – Recoil Starter String Replacement for Lawn Mower, Generator \u0026 More","description":"\u003ch2\u003eYAMAKATO 5mm Pull Cord Rope Replacement: Quick-Start Reliability for Small Engines\u003c\/h2\u003e\n\u003cp\u003eMeet the YAMAKATO 5mm 33ft pull cord rope replacement, crafted to help you start a range of small engines with ease. The cord blends a sturdy core with a tough nylon outer sheath, delivering a reliable pull even after repeated use. This replacement is designed to feel controlled in your hands and to resist wear during routine maintenance or urgent repairs.\u003c\/p\u003e\n\u003cp\u003eThe core-spun construction balances flexibility with durability, helping the cord glide through recoil mechanisms while resisting fraying. With two pull handles, you gain a confident grip and smooth leverage, whether you’re working in a shaded shed or on a windy outdoor job site. The fusion of strength and maneuverability makes it a practical option for ongoing engine upkeep.\u003c\/p\u003e\n\u003ch3\u003eKey features at a glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDiameter: 5 mm; length commonly listed as 33 ft, with some specs noting up to 40 ft.\u003c\/li\u003e\n  \u003cli\u003eDual pull handles for better grip and leverage.\u003c\/li\u003e\n  \u003cli\u003eCore-spun design mirrors OEM-style construction for dependable performance.\u003c\/li\u003e\n  \u003cli\u003eDurable outer nylon sheath protects the inner core during heavy use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDurability and compatibility\u003c\/h3\u003e\n\u003cp\u003eBuilt to withstand repeated pulls across a variety of equipment, including lawn mowers, snow blowers, generators, pressure washers, and other small engines. The rope is suitable for Honda GX-series engines, Generac generators, Predator and Westinghouse units, and many other brands.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBroad compatibility enables a single replacement for diverse tools.\u003c\/li\u003e\n  \u003cli\u003eOEM-style core-spun construction aims to balance performance with practical replacement needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReal-world use scenarios\u003c\/h3\u003e\n\u003cp\u003eOn a chilly morning, quick access to a strong two-handed pull can mean a smoother start. In the workshop, you’ll notice the tight weave and easy threading through the recoil spool. The cord length supports a comfortable pulling distance, and the handles stay within reach for future startups.\u003c\/p\u003e\n\u003cp\u003eWhether you’re stocking a parts cabinet for a small workshop or preparing a field-ready kit for service calls, this replacement rope offers practical value, durability, and versatility. It presents a thoughtful option for routine engine upkeep without promising guaranteed results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What engines or equipment is the YAMAKATO pull cord compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for a wide range of small engines and tools, including Honda GX-series, Generac generators, Predator, Westinghouse, and common lawn equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the key specifications of this replacement cord?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Diameter is 5 mm; length is listed as 33 ft, with some specs noting up to 40 ft; includes two pull handles for easier starts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43989517762694,"sku":"B0DP8YGKSV","price":20.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-pull-cord-5mm-33ft.jpg?v=1778871278"},{"product_id":"yamakato-398811-ignition-coil-for-horizontal-vertical-single-cylinder-engines-armature-magneto","title":"YAMAKATO 398811 Ignition Coil for Horizontal\/Vertical Single-Cylinder Engines | Armature Magneto","description":"\u003cdiv\u003e\n  \u003ch2\u003eOverview\u003c\/h2\u003e\n  \u003cp\u003eThe YAMAKATO 398811 ignition coil is a direct replacement designed to fit both horizontal and vertical single‑cylinder engines that rely on a magneto for spark. Built to approximate the OEM standard, this armature magneto aims to deliver a dependable spark as a common maintenance part used across American small engines that once relied on part 398811.\u003c\/p\u003e\n\n  \u003ch3\u003eKey features and compatibility\u003c\/h3\u003e\n  \u003cp\u003eDesigned for broad compatibility, it mirrors the original part’s fit and form, including the Briggs \u0026amp; Stratton 398811 reference. The kit is produced by a leading supplier and intends to be long-lasting, aligning with expectations of many American brands that use this magneto style.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eOEM‑style construction with durable materials\u003c\/li\u003e\n    \u003cli\u003eCompatible with multiple American small‑engine brands that use 398811\u003c\/li\u003e\n    \u003cli\u003eMounting note: if used with points, the magneto should be mounted backwards\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eWhat’s included\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e1x 398811 amature magneto with cap\u003c\/li\u003e\n    \u003cli\u003e1x 0.3mm feeler gauge\u003c\/li\u003e\n    \u003cli\u003e1x spark plug\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003ePractical use and benefits\u003c\/h3\u003e\n  \u003cp\u003eIn field use, this kit offers a ready-to-install solution that can help restore starting reliability and steady ignition timing in suitable engines. The compact magneto unit is designed for straightforward swap‑in replacement without additional components in many scenarios.\u003c\/p\u003e\n  \u003cp\u003eNote: Always follow the engine manufacturer’s timing guidelines and install orientation as specified. The kit emphasizes reliability and may help maintain smooth operation during routine maintenance or partial engine reconditioning.\u003c\/p\u003e\n\n  \u003ch3\u003eWhy choose YAMAKATO\u003c\/h3\u003e\n  \u003cp\u003eWith OEM‑standard design and a focused compatibility profile, YAMAKATO provides a practical option for enthusiasts and shop technicians looking to keep small engines running. This 398811 magneto is part of a broader line of replacement parts designed to fit a range of American brands.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What engines is this ignition coil compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It replaces Briggs \u0026amp; Stratton 398811 and fits many American small-engine brands using a single-cylinder magneto.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: 1x 398811 armature magneto with cap, 1x 0.3mm feeler gauge, and 1x spark plug.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43989699723398,"sku":"B0DT5RCQ8D","price":33.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-ignition-coil-398811-horizontal-vertical.jpg?v=1778880470"},{"product_id":"yamakato-pull-start-assembly-for-generac-generators-196cc-212cc-gp3250-gp3300-0j08074srv","title":"YAMAKATO Pull Start Assembly for Generac Generators 196cc-212cc | GP3250 GP3300 0J08074SRV","description":"\u003cdiv\u003e\n  \u003ch2\u003eYAMAKATO Pull Start Assembly for Generac Generators\u003c\/h2\u003e\n  \u003cp\u003eRevitalize your backup power with a purpose-built pull-start assembly designed for Generac engines in the 196cc–212cc range, including GP3250 and GP3300 models. This replacement kit aligns with common rectangle-type starters used on Generac and select Chinese-made units, giving you a practical option when the pull cord or recoil has seen better days.\u003c\/p\u003e\n  \u003cp\u003eCrafted to fit a broad set of applications, this kit references established part numbers such as 0J08074SRV, 0J08071SRV, 0J08070SRV, and 0K68130112, helping you match the correct component for your equipment. In the box you’ll find an extra pull string and four mounting nuts to support a straightforward installation and a tidy finish.\u003c\/p\u003e\n  \u003ch3\u003eWhat’s included\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003ePull-start assembly for Generac GP3250\/GP3300 and 196–212cc engines\u003c\/li\u003e\n    \u003cli\u003eExtra pull string for quick maintenance or spare use\u003c\/li\u003e\n    \u003cli\u003eFour mounting nuts for secure attachment\u003c\/li\u003e\n    \u003cli\u003eGeneral replacement kit for rectangle-type pull starters\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eCompatibility highlights\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eWorks with Generac 2\" gas water pumps CW20, C20, ST20K and similar PSI ranges up to 3600\u003c\/li\u003e\n    \u003cli\u003eSuitable for WEN PW3100 and PW3200 pressure washers with 208cc engines\u003c\/li\u003e\n    \u003cli\u003eMatches associated part numbers: 0J08074SRV, 0J08070SRV, 0J08071SRV, 0K68130112, G0071431\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eUsage scenarios and benefits\u003c\/h3\u003e\n  \u003cp\u003ePicture a quick, controlled start on a backup generator during a camping trip, a storm-ready home, or a job site where dependable power matters. While outcomes vary by engine condition, replacing a worn pull-start can improve rope pull feel and reduce resistance, contributing to smoother starts and less downtime during routine maintenance.\u003c\/p\u003e\n  \u003ch3\u003eInstallation tips\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDouble-check engine size (196cc–212cc) and GP-series designation before installation\u003c\/li\u003e\n    \u003cli\u003eAlign mounting points with the starter housing and secure with the included nuts\u003c\/li\u003e\n    \u003cli\u003eKeep a spare pull string handy for future replacements\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models is the YAMAKATO pull start compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for Generac GP3250, GP3300, and 196–212cc engines; verify your model numbers before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Pull-start assembly, extra pull string, and four mounting nuts for a complete replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43989709750406,"sku":"B0BJYZH2S8","price":31.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-pull-start-assembly-generac.jpg?v=1778881005"},{"product_id":"yamakato-recoil-starter-for-honda-gx120-gx160-gx200-28400-zh8-13ya-28400-zh8-013za","title":"YAMAKATO Recoil Starter for Honda GX120 GX160 GX200 – 28400-ZH8-13YA\/28400-ZH8-013ZA","description":"\u003ch2\u003eRevitalize your engine start with the YAMAKATO Recoil Starter\u003c\/h2\u003e\u003cp\u003eWhen starting a small- to mid-size engine, reliability matters. The YAMAKATO Recoil Starter Pull Start Assembly is designed to deliver a solid, repeatable pull for select Honda GX-series engines. The unit features a vibrant red housing and a compact 51 mm ratchet housing, giving you a visual cue for a dependable component in your machine’s starting system. A 4.0 mm nylon braided pull rope is included to align with Honda-style cords, offering a smooth feel when you pull and a durable grip through frequent starts.\u003c\/p\u003e\u003cp\u003eWith its aftermarket design, this kit echoes the fit and function of the original parts while offering a straightforward replacement option. It comes ready-to-install, including the pull starter, rope, a small hardware set, and a decal—all packaged to simplify quick swaps during routine maintenance or a busy workday.\u003c\/p\u003e\u003ch3\u003eKey specifications at a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTotal weight around 410 g, indicating a sturdy, robust assembly\u003c\/li\u003e\n\u003cli\u003eRed plastic housing with a 51 mm diameter ratchet\u003c\/li\u003e\n\u003cli\u003eCenter-to-center bolt hole pattern: 139 mm in a triangle pattern; hole-to-hole center distance 160 mm\u003c\/li\u003e\n\u003cli\u003e4.0 mm nylon braided pull rope designed for durability\u003c\/li\u003e\n\u003cli\u003eAftermarket standard compatible with Honda part numbers 28400-ZH8-13YA, 28400-ZH8-013ZA, 28400-ZH8-013ZB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 recoil pull starter\u003c\/li\u003e\n\u003cli\u003e1 pull rope\u003c\/li\u003e\n\u003cli\u003e3 nuts\u003c\/li\u003e\n\u003cli\u003e1 decal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fit\u003c\/h3\u003e\u003cp\u003eDesigned for many Honda GX120, GX160, and GX200 engines (5.5 hp to 6.5 hp ranges) and their generators, lawn mowers, edge trimmers, snow blowers, pressure washers, water pumps, ATVs, mini bikes, tillers, and go-karts. It is an aftermarket replacement that may suit a broad set of GX-series applications, including engines powering 159cc and 196cc variants.\u003c\/p\u003e\u003cp\u003eImportant: it does not fit every GX-series model. Before ordering, compare your pully, pawl, and ratchet type, plus the nut hole positions and overall size against your original starter to confirm a match.\u003c\/p\u003e\u003ch3\u003eReal-world use and benefits\u003c\/h3\u003e\u003cp\u003eThe red housing makes the unit easy to locate in your toolkit or on the machine. Its solid construction supports regular starting activity across a range of equipment, from stationary generators to mobile lawn care tools. The included rope and hardware streamline installation, reducing downtime during maintenance or part swaps. While a fit cannot be guaranteed for every GX variant, this kit provides a practical, ready-to-install option for many GX120\/GX160\/GX200 applications, potentially helping you keep equipment ready for use when you need it most.\u003c\/p\u003e\u003ch3\u003eWhy choose YAMAKATO\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDurable build designed for repeated starts\u003c\/li\u003e\n\u003cli\u003e4.0 mm braided rope offers reliable performance under tension\u003c\/li\u003e\n\u003cli\u003eComes with essential hardware for a complete, single-package installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Honda GX models are compatible with the YAMAKATO Recoil Starter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits many GX120, GX160, and GX200 engines; verify pulley, pawl, and bolt-hole patterns against your unit before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What’s included in the package and what should I check before ordering?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Includes 1 recoil starter, 1 rope, 3 nuts, and 1 decal; compare your original parts to ensure compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43989758476422,"sku":"B09Y47QZ61","price":27.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-recoil-starter-pull-start-honda-gx120.jpg?v=1778883433"},{"product_id":"yamakato-150-811-recoil-starter-assembly-for-stihl-br500-br550-br600-replacement-part","title":"YAMAKATO 150-811 Recoil Starter Assembly for Stihl BR500\/BR550\/BR600 | Replacement Part","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe YAMAKATO 150-811 Pull Recoil Starter Assembly is a purpose-built replacement for Stihl BR500, BR550, and BR600 backpack blowers. Its sturdy plastic body feels solid in hand, and the compact design makes handling and installation straightforward during routine maintenance or field work.\u003c\/p\u003e\n\u003cp\u003eDesigned as a direct replacement, this unit covers OEM parts 150-811, 42821900300, and 42821900300A, offering a reliable option for keeping your blower ready to go. The package includes one 150-811 recoil pull starter, ready for a quick swap.\u003c\/p\u003e\n\u003ch3\u003eCompatibility and replacement parts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits Stihl BR500, BR550, and BR600 backpack blowers\u003c\/li\u003e\n\u003cli\u003eReplaces OEM parts 150-811, 42821900300, and 42821900300A\u003c\/li\u003e\n\u003cli\u003eIncludes 1 × 150-811 recoil pull starter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow it works and real-world use\u003c\/h3\u003e\n\u003cp\u003eWith a firm pull, the recoil engages the crankshaft to start the engine. The assembly is designed for reliable engagement and a smooth start, reducing frustration during busy workdays or in challenging outdoor conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to install with common tools and proper alignment\u003c\/li\u003e\n\u003cli\u003eDurable plastic construction designed to withstand regular field use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy choose YAMAKATO\u003c\/h3\u003e\n\u003cp\u003eYAMAKATO blends value, durability, and compatibility in a replacement part built to fit your Stihl BR blower. Consider this option as part of routine maintenance to help minimize downtime and keep your equipment ready for action.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What Stihl models is this starter compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Stihl BR500, BR550, and BR600 backpack blowers as a direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Includes 1 x 150-811 recoil pull starter for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43989771714694,"sku":"B0FG6V3HPS","price":29.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-150-811-pull-starter-br600.jpg?v=1778884061"},{"product_id":"yamakato-huayi-carburetor-for-cub-cadet-951-14423-more-oem-replacement","title":"YAMAKATO Huayi Carburetor for Cub Cadet 951-14423 \u0026 More – OEM Replacement","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe YAMAKATO Huayi Carburetor is an OEM-standard replacement kit crafted for Huayi 5X65B engines used in a wide family of lawn care machines. Built to suit 159cc vertical-shaft powerplants and related Huayi variants, this carburetor kit provides a dependable component option when a factory part is needed to restore steady, reliable operation.\u003c\/p\u003e\n\u003cp\u003eDesigned to mirror original specifications, this kit supports consistent fuel delivery and air-fuel mixture across multiple brands. It’s compatible with popular models from Cub Cadet, Troy-Bilt, MTD, Yard Machine, Yard Man, and Husky lines, giving you a versatile option for common walk-behind mowers and edgers.\u003c\/p\u003e\n\n\u003ch2\u003eWide Compatibility\u003c\/h2\u003e\n\u003cp\u003eCompatible engine families and model examples include the Huayi 5X65B family (and variants 5X65RU, 5X65VUA, 5X65VUB) along with 159cc and 6X65RU family motors. The kit is suitable for a broad range of units, enabling a single replacement option across several brands.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCub Cadet SC300HW, SC100, ST100, SC500Z, SC500, SC500HW, SC100HW, SC500EZ, LE100 Edger\u003c\/li\u003e\n  \u003cli\u003eTroy-Bilt TB120, TB105, TB115, TB220, TB270ES (various years)\u003c\/li\u003e\n  \u003cli\u003eMTD 12AVC62J719, 25A-262J897, 12ABC32J799, 12ABD32J799, 12ABB22J799\u003c\/li\u003e\n  \u003cli\u003eYard Machine and Yard Man models like 11A-A22J700, 12A-A02J700, 11A-B02J701, 11A-B22J701\u003c\/li\u003e\n  \u003cli\u003eHusky lines such as 11A-B22J731 and related units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat to Expect\u003c\/h2\u003e\n\u003cp\u003eWith the YAMAKATO Huayi Carburetor, you may experience more consistent starting and smoother idle, thanks to a replacement that aligns with the original intake and fuel delivery design. The kit’s OEM quality aims to maintain reliable combustion and steady performance under typical mowing loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePotential easier starts and steadier idle\u003c\/li\u003e\n  \u003cli\u003eImproved fuel delivery consistency across compatible engines\u003c\/li\u003e\n  \u003cli\u003eDurable, OEM-grade construction built for regular lawn care use\u003c\/li\u003e\n  \u003cli\u003eDesigned for straightforward installation with standard tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation \u0026amp; Care\u003c\/h2\u003e\n\u003cp\u003eThis carburetor kit is intended as a direct replacement for Huayi-based engines. Review your engine model and serial numbers before installation. Basic mechanical skills and standard hand tools are typically sufficient, and following manufacturer safety guidelines is recommended.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose YAMAKATO\u003c\/h2\u003e\n\u003cp\u003eYAMAKATO focuses on delivering replacement parts that respect original specifications while offering reliable performance across a variety of popular mower brands. This Huayi carburetor kit emphasizes compatibility, quality, and practical value for regular mower maintenance and repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which mowers are compatible with the YAMAKATO Huayi Carburetor kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with Cub Cadet, Troy-Bilt, MTD, Yard Machine, Yard Man, and Husky models listed in the product data.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my Huayi 5X65B engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your engine is 159cc Huayi 5X65B-based (including 5X65RU\/5X65VUA\/5X65VUB), this kit is designed for compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43989780660358,"sku":"B0BYN4ZCY8","price":29.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamkato-huayi-carburetor-box-cub-cadet-951-14423.jpg?v=1778884504"},{"product_id":"yamakato-gx160-gx200-pull-start-with-pulley-cup-for-honda-clones","title":"YAMAKATO GX160\/GX200 Pull Start with Pulley Cup for Honda \u0026 Clones","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eUpgrade your engine starting experience with the YAMAKATO GX160 GX200 Pull Start Assembly. This replacement kit is designed to support a range of GX series machines, offering a practical blend of durability and ease of use. It is not a guarantee of performance, but it provides a straightforward option for replacing a worn or damaged pull start, with components selected to support reliable operation in everyday applications.\u003c\/p\u003e\u003cp\u003eThe kit is built around a six mounting hole starter design that installs with three bolts, helping you achieve a secure, stable fit. It includes a 47 mm height iron pulley cup attached in the kit, alongside a complete pull start setup, so you can get your machine back in action without hunting for parts from multiple sources.\u003c\/p\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePull starter assembly\u003c\/li\u003e\n\u003cli\u003ePulley cup (47 mm height)\u003c\/li\u003e\n\u003cli\u003eExtra pull string\u003c\/li\u003e\n\u003cli\u003eThree mounting bolts\u003c\/li\u003e\n\u003cli\u003eOne decal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey design details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix mounting holes align with a three-bolt installation for a secure mount\u003c\/li\u003e\n\u003cli\u003eComes with a 47 mm height iron pulley cup inherent in the kit\u003c\/li\u003e\n\u003cli\u003eDesigned for use with Honda and clone type GX engines in the GX120, GX160, and GX200 families\u003c\/li\u003e\n\u003cli\u003eNot compatible with every GX engine — verify pulley type, pawl, and ratchet pattern against your original part before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere you can use it\u003c\/h3\u003e\u003cp\u003eThis pull start kit targets a broad set of GX powered tools and equipment, including tillers, water pumps, air compressors, pressure washers, generators, lawn mowers, and snow blowers. The engines span 118 cc to 196 cc, covering roughly 4 hp to 6.5 hp classes, with use cases that emphasize quick on-site maintenance and downtime reduction.\u003c\/p\u003e\u003ch3\u003eWhy consider this kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSimple swap for damaged or worn pull starts, helping you get back to work faster\u003c\/li\u003e\n\u003cli\u003eIncludes all essential components for a complete replacement, reducing the need to source parts separately\u003c\/li\u003e\n\u003cli\u003eDurable hardware and a reliable pulley cup design aimed at steady recoil\u003c\/li\u003e\n\u003cli\u003eClear compatibility notes to help you confirm fit before you order\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote that while these features support practical replacement, outcomes can vary by engine condition and usage. Always compare your original parts to ensure a correct match before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which engines is this pull start kit compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for GX120, GX160, and GX200 engines from Honda and compatible clones; verify pulley and bolt pattern against your unit before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Pull starter, pulley cup, extra pull string, three mounting bolts, and a decal are included for a ready replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43989812183174,"sku":"B0CCCTB4MB","price":27.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-gx160-pull-start-assembly.jpg?v=1778885829"},{"product_id":"yamakato-air-filter-cleaner-kit-for-predator-670cc-rato-670cc-engines-r740d-rv740-agt-lrt23-lrt26","title":"YAMAKATO Air Filter Cleaner Kit for Predator 670cc \u0026 Rato 670cc Engines | R740D RV740 AGT LRT23 LRT26","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe YAMAKATO Air Filter Cleaner Kit is designed to simplify engine air management for compatible Predator 670cc, Rato 670cc and 739cc engines. It offers a serviceable, user friendly approach to filtration that can help support cleaner intake air during operation. \u003c\/p\u003e\u003ch3\u003eWide compatibility and fitment\u003c\/h3\u003e\u003cp\u003eDesigned to fit engines including Predator 670cc, Rato 670cc, and 739cc variants, with use on models such as R740D, RV740, AGT LRT23 and AGT LRT26. It replaces part numbers 17108-Z130110-0000 and 17150-Z130110-00A0, making it a practical option for many compatible builds.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBroad engine coverage reduces the need to stock multiple kits\u003c\/li\u003e\n\u003cli\u003eOEM-style dimensions help ensure a snug fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDual-Guard protection system\u003c\/h3\u003e\u003cp\u003eThe kit integrates a foam pre-filter and a paper filter element to provide layered filtration. This design aims to help keep intake air cleaner by catching both large and fine particles before they reach the engine.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFoam pre-filter traps large debris at the first stage\u003c\/li\u003e\n\u003cli\u003ePaper filter element captures finer contaminants for thorough filtration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDurability and OEM standards\u003c\/h3\u003e\u003cp\u003eManufactured with sturdy materials designed to resist moisture, dirt and heat exposure. The construction follows an OEM standard philosophy, supporting dependable performance in challenging environments.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDurable construction for outdoor, workshop, and field use\u003c\/li\u003e\n\u003cli\u003eMaterials chosen to withstand common environmental stresses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEasy installation and exact dimensions\u003c\/h3\u003e\u003cp\u003eReplace your filter quickly and without tools, while preserving a reliable seal. The kit measures 8.86 inches long, 6.5 inches wide, and 1 inch tall; foam filters are 8.46 by 6.10 inches for a close fit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTool-free replacement saves time during maintenance\u003c\/li\u003e\n\u003cli\u003eClear dimensional data helps ensure correct fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eUsage ideas\u003c\/h3\u003e\u003cp\u003eIn real world use, owners can expect smoother air intake cycles, potential reductions in ingress of dust during outdoor work, and straightforward upkeep between more extensive service appointments. These are possibilities, not guarantees.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What engines is the YAMAKATO Air Filter Cleaner Kit compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Predator 670cc, Rato 670cc, and 739cc engines including models R740D, RV740, AGT LRT23, and AGT LRT26.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What components are included and how easy is installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes a foam pre-filter and a paper element; installation is tool-free and quick for maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43989839478918,"sku":"B0G41TX17Y","price":34.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-air-filter-cleaner-kit-predator-670cc-compatibility.jpg?v=1778887508"},{"product_id":"yamakato-gx390-throttle-control-kit-governor-base-arm-springs-for-honda-gx390-predator-420cc","title":"YAMAKATO GX390 Throttle Control Kit — Governor Base, Arm \u0026 Springs for Honda GX390 \u0026 Predator 420cc","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eMeet the YAMAKATO GX390 Throttle Control Assembly Kit, an OEM-style set crafted to help you restore or refine throttle return and governor linkage on Honda GX390 engines and popular clones such as Predator 420cc, 389cc, 429cc, and 459cc. The eight-piece kit is designed to be a practical upgrade that integrates with your existing assembly, offering robust components without requiring a full replacement.\u003c\/p\u003e\n\u003cp\u003eInstead of a single part, this kit bundles essential throttle and governor pieces to support smoother throttle movement and more predictable control under load. The construction and fit are aimed at ensuring compatibility with established engine models, while keeping in mind the variety of GX390 variants you may encounter in the field.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 governor base\u003c\/li\u003e\n  \u003cli\u003e1 governor arm\u003c\/li\u003e\n  \u003cli\u003e2 carburetor springs\u003c\/li\u003e\n  \u003cli\u003e2 throttle governor rods\u003c\/li\u003e\n  \u003cli\u003e2 throttle return springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility and fit\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed for Honda and clone engines, including Predator and Champion models in the 389cc–459cc range. Since GX390 models vary, please verify that the sizes shown in the product images match your engine to ensure the right fit. The parts are sourced from the engine manufacturer’s supplier, offering a level of compatibility with engines produced in China.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Honda GX390 and clone models such as Predator 420cc, 389cc, 429cc, and 459cc\u003c\/li\u003e\n  \u003cli\u003eDifferent GX390 variants exist—check image sizes to order the correct version\u003c\/li\u003e\n  \u003cli\u003eParts are from an engine manufacturer’s supplier, designed to fit many Made in China engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes for installation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThere may be matching issues between the throttle kit and carburetors; if your original part is still functioning, you may choose to continue using it.\u003c\/li\u003e\n  \u003cli\u003eDouble-check the product images to confirm the size compatibility with your engine model before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose YAMAKATO\u003c\/h3\u003e\n\u003cp\u003eYAMAKATO delivers an OEM-inspired throttle control solution that emphasizes reliability and ease of integration. Expect a kit that emphasizes solid components and thoughtful design to support repeatable throttle behavior and dependable governor operation, without making promises about guaranteed results. This kit is positioned as a practical upgrade for users who want to restore or optimize throttle linkage on familiar engine platforms.\u003c\/p\u003e\n\n\u003ch3\u003eReal-world use possibilities\u003c\/h3\u003e\n\u003cp\u003eIn daily maintenance or field use, you might notice improved throttle feel and more consistent engine response when the governor engages. The eight-piece configuration provides a complete path for throttle and governor linkage, which can simplify reassembly after maintenance and help you verify parts are correctly aligned during routine checks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What engines is this kit compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Honda GX390 and clone engines including Predator 420cc, 389cc, 429cc, and 459cc.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What should I check before ordering?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare product images to your engine to confirm size compatibility; note possible throttle-carburetor matching issues.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43989856452742,"sku":"B095H4997C","price":30.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-gx390-throttle-control-kit-assembly.jpg?v=1778888669"},{"product_id":"yamakato-gc-ignition-coil-for-honda-gcv-gc-small-engines-30500-zl8-014-30500-zl8-004-pack-of-1","title":"YAMAKATO GC Ignition Coil for Honda GCV\/GC Small Engines | 30500-ZL8-014 \u0026 30500-ZL8-004 | Pack of 1","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe YAMAKATO GC ignition coil is designed as a reliable, OEM-style replacement for Honda small engines in the GC, GCV, GS, and GSV families. This coil aims to support consistent starts and steady performance across lawn care and outdoor equipment, from push mowers to snow blowers and generators.\u003c\/p\u003e\n\u003ch3\u003eCompatibility you can trust\u003c\/h3\u003e\n\u003cp\u003eBuilt to fit Honda GCV135, GCV160, GC160, GSV160, GCV190, GC190, and GSV190 variants, this coil also works with a broad range of HR, HS, and HRT series mowers and related equipment. The listing references multiple part numbers to cover different serial ranges, so a quick cross-check helps you pick the right match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngine families: GCV, GC, GS, GSV\u003c\/li\u003e\n  \u003cli\u003eCommon applications: lawn mowers, snow blowers, rototillers, generators, water pumps\u003c\/li\u003e\n  \u003cli\u003eSerial and part-number notes: 30500-ZL8-014, 30500-ZL8-004, 30500-Z0J-003, 30500-Z8B-901\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat this replacement offers\u003c\/h3\u003e\n\u003cp\u003eThink of this coil as a compact, efficient component designed to deliver a consistent spark under typical outdoor conditions. While outcomes can vary by engine and use, a fresh ignition coil is commonly associated with easier starts and steadier idle during routine mowing and seasonal tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-equivalent form and fit for Honda GCV\/GC engines\u003c\/li\u003e\n  \u003cli\u003eDurable build that resists vibration and exposure to the elements\u003c\/li\u003e\n  \u003cli\u003eCompact footprint that fits common coil locations without modification\u003c\/li\u003e\n  \u003cli\u003eClear part references to help verify compatibility before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePractical use cases\u003c\/h3\u003e\n\u003cp\u003eReplacing an aging coil is a practical maintenance step that can keep your equipment ready for work. This coil is suitable for DIY replacements and for stocking in a parts bag for seasonal wear and tear, especially before peak mowing or storm-season use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpring checks to ease cold-starts and improve reliability\u003c\/li\u003e\n  \u003cli\u003eMid-season maintenance to prevent stalls on warm days\u003c\/li\u003e\n  \u003cli\u003eSnow blower or generator readiness for winter weather\u003c\/li\u003e\n  \u003cli\u003ePart of a ready-to-use spare parts kit for home workshops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes and care\u003c\/h3\u003e\n\u003cp\u003ePlease review the product name and images to confirm the exact replacement you need. The listing includes several part numbers to accommodate different serial ranges, so a quick cross-check helps prevent mismatches.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which engines does this coil fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Honda GCV\/GC\/GS\/GSV small engines listed (GCV135, GCV160, GC160, GC190, etc.). Verify model and serial references before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How can I verify I am choosing the right coil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare part numbers 30500-ZL8-014, 30500-ZL8-004, 30500-Z0J-003, and check your engine model and serial range for compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43989861859462,"sku":"B0D8BCWHLS","price":29.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-gc-ignition-coil-honda-compatibility.jpg?v=1778889055"},{"product_id":"yamakato-gx390-recoil-pull-starter-for-honda-gx340-gx390-clones-11-15hp-replacement-28400-ze3-w01za","title":"YAMAKATO GX390 Recoil Pull Starter for Honda GX340 GX390 \u0026 Clones | 11-15HP Replacement 28400-ZE3-W01ZA","description":"\u003cp\u003eThe YAMAKATO GX390 Recoil Pull Starter is a sturdy replacement designed to fit a broad range of Honda engines and their clones. Built to withstand outdoor use, this unit provides a reliable pull experience with a compact, rugged housing. The assembly features a black iron plate pawl and an OEM nylon 66 rope, designed to be compatible with standard Honda starter cords for straightforward installation.\u003c\/p\u003e\n\u003cp\u003eBefore purchasing, you can confirm fit with the unit’s mounting geometry and compatible engine families. The diameter of the ratchet and housing is 54 mm and 81 mm, while the bolt hole pattern centers measure 172 mm in a triangle pattern and 199 mm from hole to hole through the center. These precise measurements help you compare against your current starter to ensure a proper match, reducing the guesswork during replacement.\u003c\/p\u003e\n\u003ch3\u003eCompatibility at a glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEngine families: GX340, GX390, GX610, GX620; including GXV340, GXV390, GXV610, GXV620\u003c\/li\u003e\n  \u003cli\u003eHorsepower range: 11 HP, 13 HP, and up to 15 HP variants\u003c\/li\u003e\n  \u003cli\u003eCross-brand support: designed for Honda and clone models; cord compatibility with common OEM starters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe replacement part is associated with the numbers 28400-ZE3-W01ZA and 0J58620170, which can help you locate exact matches in catalogs or supplier listings. For broader replacement options, the unit is listed to fit Oregon 31-060 and Rotary 26-10379 150-707 references as well, expanding its replacement potential across multiple brands.\u003c\/p\u003e\n\u003ch3\u003ePractical versatility and installation ready\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement part suitable for a wide array of equipment: lawn mowers, edge cutters, snow blowers, pressure washers, water pumps, ATVs, mini bikes, tillers, go karts\u003c\/li\u003e\n  \u003cli\u003eFits generators powered by GX340, GX390 and clone engines in the 339cc–459cc range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn real-world use, this starter offers a clean, controlled pull that can restore easy starting without needing extensive engine work. The included nylon rope is compatible with standard Honda starter cords, and the iron pawl design contributes to a durable build that resists wear over time. While performance depends on usage and maintenance, swapping in this model may help reduce friction and simplify startup on compatible machines.\u003c\/p\u003e\n\u003cp\u003eChoosing YAMAKATO means selecting a practical replacement designed for broad fitment, durability, and straightforward installation. It suits DIY repairs and shop inventories where a dependable, cross-brand option can save time and keep equipment ready for use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What engines is the YAMAKATO GX390 Recoil Pull Starter compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Honda GX340\/GX390 and clones GX610, GX620, and 11–15 HP variants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mounting dimensions should I check before buying?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Bolt hole pattern 172 mm triangle; through-hole centers 199 mm; pawl diameter 54 mm and housing 81 mm.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43989869658246,"sku":"B097MJNB2H","price":29.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-gx390-recoil-pull-starter-exterior.jpg?v=1778889227"},{"product_id":"yamakato-pull-cord-rope-assortment-3mm-3-5mm-4mm-5mm-x16ft-4-pull-handles","title":"YAMAKATO Pull Cord Rope Assortment: 3mm, 3-5mm, 4mm, 5mm x16ft + 4 Pull Handles","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eMeet the YAMAKATO Pull Cord Rope Assortment, a versatile set designed to refresh or replace worn start cords on a wide range of power equipment. Built with a core-spun construction, each cord combines a strong central core with a tough nylon outer sheath—supporting durable starts and reliable operation under regular use.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3mm x 16 ft pull cord (1)\u003c\/li\u003e\n\u003cli\u003e3.5mm x 16 ft pull cord (1)\u003c\/li\u003e\n\u003cli\u003e4mm x 16 ft pull cord (1)\u003c\/li\u003e\n\u003cli\u003e5mm x 16 ft pull cord (1)\u003c\/li\u003e\n\u003cli\u003ePull handles (4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Specs \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM-standard core-spun design with a central core and durable outer nylon sheath\u003c\/li\u003e\n\u003cli\u003ePrecise diameters and 16 ft lengths to fit a variety of starter housings and engines\u003c\/li\u003e\n\u003cli\u003eCompatibility spans popular brands and equipment, from chainsaws to generators and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize Guidance by Engine Class\u003c\/h3\u003e\n\u003cp\u003eThe 3.0 mm pull cord is typically used in small engines (32cc–99cc, 1–3hp). The 3.5 mm option serves mid-range engines (64cc–190cc, 2–8hp) and mid-wattage generators (1200–3000W). The 4.0 mm cord suits engines around 159cc–224cc (4–8hp) and 3000–5000W generators. The 5.0 mm line targets larger small engines (242cc–459cc, 8–20hp) and 5000–10000W equipment.\u003c\/p\u003e\n\n\u003ch3\u003eReal-World Use Cases\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement cords for lawn mowers, snow blowers, and pressure washers\u003c\/li\u003e\n\u003cli\u003eStarter cord refresh for generators, minibikes, and air compressors\u003c\/li\u003e\n\u003cli\u003eRepairs for edge trimmers, weed eaters, and brush cutters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eQuality and Practical Benefits\u003c\/h3\u003e\n\u003cp\u003eDesigned to support dependable starts and longer service life, these cords follow a core-spun approach with a tough outer sheath. The assortment offers broad compatibility, making it easier to find a match for many hobbyist and professional machines without guesswork.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What sizes are included in the YAMAKATO Pull Cord Ropes Assortment?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Includes 3mm, 3-5mm, 4mm, and 5mm cords, each 16 feet, plus four pull handles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the pull cords compatible with common lawn and power equipment brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed to fit many small engines and equipment from brands such as Stihl, Echo, Ryobi, Honda, Generac, and more.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAMAKATO","offers":[{"title":"Default Title","offer_id":43989903179910,"sku":"B0DP8ZYFGW","price":26.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0665\/1602\/5478\/files\/yamakato-pull-cord-3mm-16ft.jpg?v=1778891030"}],"url":"https:\/\/patiozora.com\/collections\/brand-yamakato.oembed","provider":"PatioZora","version":"1.0","type":"link"}