BioGuard Balance Pak 100 Alkalinity Increaser - 25 lb

Why total alkalinity matters in pool care

BioGuard Balance Pak 100 helps raise total alkalinity in swimming pool water, providing a buffer against pH swings caused by rain, heavy use, and chemical dosing. When alkalinity sits too low, the water can become corrosive to metal and plastic components, potentially leading to premature wear and surface issues.

This 25 lb bag is formulated from 100% Sodium Hydrogen Carbonate and is designed to dissolve quickly when added directly to water as the pool pump runs, making it a convenient option for maintaining balanced water chemistry.

What Balance Pak 100 does for your pool

• Raises total alkalinity to stabilize pH and reduce fluctuation from weather and use
• Helps protect surfaces by preventing aggressive water conditions that can stain, etch plaster, or wrinkle liners
• Dissolves rapidly, enabling even distribution in the pool

Dosing and usage guidance

Recommended dosage is 1.5 lb per 10,000 gallons of water to raise approximately 10 ppm. Add directly to the pool with the pump running, and for even distribution, add half of the bag, wait 15 minutes, then add the remaining half.

• Dosage: 1.5 lb per 10,000 gallons to raise about 10 ppm
• Disperse evenly around the pool with circulating water
• Allow a 15-minute circulation after dosing for full dissolution

Why choose BioGuard Balance Pak 100

• 100% Sodium Hydrogen Carbonate formula for reliable performance
• Supports stable alkalinity, helping minimize pH bounce after rain or heavy use
• Designed to protect pool surfaces from staining, etching, and liner wrinkling

Always test your water balance and adjust as needed for your specific pool conditions.